User Guide
Table Of Contents
- FUJITSU Tablet STYLISTIC R726
- Contents
- Declarations of conformity
- Fujitsu Contact Information
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching the Tablet PC on
- Switching the Tablet PC off
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape format)
- Using fingers
- Using the stylus (optional, configuration dependent)
- Volume rocker
- Camera
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- Wireless LAN/Bluetooth/NFC wireless components (configuration dependent)
- Ethernet and LAN (only with docking cradle)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Using the security lock (docking cradle only)
- Configuring password protection in BIOS Setup Utility
- Trusted Platform Module - TPM (configuration dependent)
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- Recovering your Factory Image
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the stylus movements
- Stylus input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Acoustic warning
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Declarations of conformity
- FCC Regulatory Information
- Canada, Industry Canada (IC)
- Appendix
- Index
Connecting external devices
Display Port (docking cradle only)
DisplayPort
The Display Port of the docking cradle can be used to connect a monitor, an LCD
TV or a plasma TV with a corresponding conn ection. Display output is limited to a
maximum of two external screens at the same time.
► Connect the data cable to the
external device.
► Connect the data cable to the D isplay
Port of the c radle.
Some LCD televisions have only two speaker connections an d therefore
cannot reproduce Dolby Digital or DTS. In o rder to reproduce the sound, you
must go into Windows and adjust th e sound settings.
► To do this, deactivate the DTS Audio and Dolby Digita l settings in the contro l
panel for the Realtek HDMI Output.
HDMI port (docking cradle o nly)
HDMIport
TheHDMIporto
f the d ocking cradle can be used to connect an external amplifier,
LCD TV or a plas
ma TV with an HDMI c onnection. Display output is limited to a
maximum of two
external screens at the same time.
► Connect the d
ata cable to the
external de
vice.
► Connect the data cable to the HDMI
port of the docking cradle.
Some LCD televisions have only two speakers/speaker ports and therefo re
cannot reproduce Dolby Digital or DTS. To play back HDMI sound, you
must change th e HDMI sound settings accordingly.
You can find the settings under Control Panel - Hardware and Sound. Deactivate the
settings f or DTS Audio and Dolby Digital to enable playback of HDMI sound.
Fujitsu 63