User Guide
Table Of Contents
- FUJITSU Tablet STYLISTIC R726
- Contents
- Declarations of conformity
- Fujitsu Contact Information
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching the Tablet PC on
- Switching the Tablet PC off
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape format)
- Using fingers
- Using the stylus (optional, configuration dependent)
- Volume rocker
- Camera
- Rechargeable battery
- Using the energy saving functions
- Memory cards
- Wireless LAN/Bluetooth/NFC wireless components (configuration dependent)
- Ethernet and LAN (only with docking cradle)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Using the security lock (docking cradle only)
- Configuring password protection in BIOS Setup Utility
- Trusted Platform Module - TPM (configuration dependent)
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- BIOS Setup Utility operation
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
- Load Setup Defaults – load default values
- Discard Changes - Discard Changes without exiting BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save changes and power off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- Recovering your Factory Image
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the stylus movements
- Stylus input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Acoustic warning
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Declarations of conformity
- FCC Regulatory Information
- Canada, Industry Canada (IC)
- Appendix
- Index
Working with the Tablet PC
Camera
Camera
Your device has two cameras: one on the front of the device a nd one on the rear.
The camera has its ow n status indicator. The indicator lights up when the camera is active.
Depending on the software used, you can use your camera to take pictures,
record video clips or take part in web chats.
• The picture quality depends on the lighting conditions and the software being used.
• You can only use the camera with a particular application (e.g. an Internet telephony
program or a video conferencing p rogram which supports cameras).
• The support of the Tablet PC must not shake while the camera is being used.
• The camera automatically adjusts itself to the c urrent light level. For this reason,
the touch screen may flicker while the light level is adjusted.
Further information on the use of the camera and additional settings for it can
be fo und in the help function of the prog ram using the camera.
Rechargeable battery
BatteryBatteryServicelife,batteryRechargeablebatteryBattery
The built-in battery provides the Table t PC with the necessary power for use on the move.
You can increase the service life of the battery by caring for the battery properly. The
average battery service life is around 500 charge/discharge cycles.
You can extend the battery service life by taking advantage of the available energy-saving functions.
Charging and maintaining th e ba ttery
BatteryBattery
The Tablet PC battery can only b e charged when the ambient te mperature is
between 5°C / 41 °F a nd m ax. 35°C / 95°F.
You can charge the battery by connecting the Tab let PC to the AC adapter
(see "
Connecting the AC adapter", Page 21).
If the AC adapter is connected when the state of charge of the battery is more than 90% ,
charging will not be started. When the state of charge of the battery is less than 90%, the
battery will be charged to 100% as soon as the AC adapter is connected.
If the batte ry is running low you will hear a warning alarm. If you do not connect th e AC adapter
within five minutes of hearing the warning alarm, your Tablet PC will switch off automatically.
Monitoring the battery state of charge
Batt
ery
batt
erychargemeter
A battery symbol for monitoring the battery capacity is displayed in the system bar /
status indicator. The battery symbol shows you the battery charge.
Fujitsu 37