Design Technical Manual
Table Of Contents
- CHAPTER00
- CHAPTER01_General_information
- CHAPTER02_Model_selection
- 1. MODEL SELECTION PROCEDURE
- 2. MODEL LINE UP
- 3. MODEL SELECTION AND CAPACITY CALCULATION
- 4. CAPACITY TABLE COOLING (OUTDOOR UNIT)
- 5. CAPACITY TABLE HEATING (OUTDOOR UNIT)
- 6. CAPACITY COMPENSATION COEFFICIENT
- 7. CAPACITY TABLE COOLING (INDOOR UNIT)
- 7-1. COMPACT CASSETTE TYPE
- 7-2. CIRCULAR FLOW CASSETTE TYPE
- 7-3. CASSETTE TYPE
- 7-4. MINI DUCT TYPE
- 7-5. SLIM DUCT / SLIM CONCEALED FLOOR TYPE
- 7-6. MEDIUM STATIC PRESSURE DUCT TYPE
- 7-7. HIGH STATIC PRESSURE DUCT TYPE
- 7-8. VERTICAL AIR HANDLER TYPE
- 7-9. COMPACT FLOOR TYPE
- 7-10. FLOOR / CEILING TYPE
- 7-11. CEILING TYPE
- 7-12. WALL MOUNTED TYPE
- 8. CAPACITY TABLE HEATING (INDOOR UNIT)
- 8-1. COMPACT CASSETTE TYPE
- 8-2. CIRCULAR FLOW CASSETTE TYPE
- 8-3. CASSETTE TYPE
- 8-4. MINI DUCT TYPE
- 8-5. SLIM DUCT / SLIM CONCEALED FLOOR TYPE
- 8-6. MEDIUM STATIC PRESSURE DUCT TYPE
- 8-7. HIGH STATIC PRESSURE DUCT TYPE
- 8-8. VERTICAL AIR HANDLER TYPE
- 8-9. COMPACT FLOOR TYPE
- 8-10. FLOOR / CEILING TYPE
- 8-11. CEILING TYPE
- 8-12. WALL MOUNTED TYPE
- CHAPTER03_Outdoor_units
- CHAPTER04_Indoor_units
- CHAPTER05_Control_system
- 1. CONTROL SYSTEM
- 2. CONTROL UNITS
- 2-1. SYSTEM CONTROLLER
- 2-2. SYSTEM CONTROLLER LITE
- 2-3. TOUCH PANEL CONTROLLER
- 2-4. CENTRAL REMOTE CONTROLLER
- 2-5. WIRED REMOTE CONTROLLER (Touch panel)
- 2-6. WIRED REMOTE CONTROLLER
- 2-7. SIMPLE REMOTE CONTROLLER (With Operation mode)
- 2-8. SIMPLE REMOTE CONTROLLER (Without Operation mode)
- 2-9. WIRELESS REMOTE CONTROLLER
- 2-10. IR RECEIVER UNIT (for ALL DUCT TYPE)
- 2-11. IR RECEIVER UNIT (for CASSETTE TYPE)
- 2-12. IR RECEIVER UNIT (for CIRCULAR FLOW CASSETTE TYPE)
- 2-13. HUMAN SENSOR KIT (for CIRCULAR FLOW CASSETTE TYPE)
- 2-14. REMOTE SENSOR UNIT
- 2-15. PRESSURE SENSOR KIT
- 2-16. GROUP CONTROL METHOD
- 2-17. COMPARISON TABLE OF CONTROLLERS
- 3. ADAPTOR / CONVERTOR UNITS
- 4. SERVICE & WEB MONITORING TOOL
- CHAPTER06_System_design
- CHAPTER07_Function_setting
- CHAPTER08_External_input_and_output
- CHAPTER09_Notes
- CHAPTER10_Optional_parts
- CHAPTER99
1-2. SEPARATION TUBE FOR 3 PIPES
UTP-BX090A
z
Port diameters
Liquid pipe Discharge gas pipe
Q'ty Q'ty
1 1
Suction gas pipe
Q'ty
1
z
Heat insulation
Heat insulation Application
Q'ty
3
for Liquid pipe × 1
for Discharge gas
pipe × 1
for Suction gas
pipe × 1
Ø1/4 (6.35)
Ø3/8 (9.52)
Ø1/2 (12.70)
Ø5/8 (15.88)
Ø1/4 (6.35)
Ø1/4 (6.35)
Ø3/8 (9.52)
Ø3/8 (9.52)
Ø1/2 (12.70)
Ø1/2 (12.70)
Ø5/8 (15.88)
REDUCER
Ø3/4 (19.05)
Ø3/4 (19.05)
Ø3/4 (19.05)
Ø3/8 (9.52)
Ø1/4 (6.35)
Ø1/2 (12.70)
Ø1/2 (12.70)
Ø1/2 (12.70)
Ø5/8 (15.88)
Ø5/8 (15.88)
Ø5/8 (15.88)
EXPANDER
EXPANDER
Ø3/8 (9.52)
Ø1/2 (12.70)
Ø5/8 (15.88)
Ø3/4 (19.05)
Ø7/8 (22.22)
Ø1/2 (12.70)
Ø5/8 (15.88)
Ø3/4 (19.05)
Ø7/8 (22.22)
Ø3/8 (9.52)
Ø1/2 (12.70)
Ø5/8 (15.88)
Ø3/4 (19.05)
Ø1-1/8 (28.58)
Ø7/8 (22.22)
Tape
Q'ty
8
Unit: in. (mm)
- (10 - 10) -
OPTIONAL
PARTS
OPTIONAL
PARTS