User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q665
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touchscreen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the pen (optional, depending on the configuration)
- Tablet buttons
- Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN€/ Bluetooth€/ UMTS€/ LTE / NFC radio components
- Ethernet and LAN (only multifunctional cradle)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator does not illuminate
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- User and/or supervisor SmartCard lost
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows 8/8.1
- Technical data
- Manufacturer’s notes
- Index
Security functions
Activating hard disk protection
► Call up the BIOS Setup and select the Security menu.
If you have not assigned BIO S passwords yet, define the supervisor and the user
password now, if desired (see "
Securit y functions", Page 52).
► Mark the Hard Disk Security field and press the Enter key.
► In the Drive0 area ma rk the Set Master Password field and press the Enter key.
Enter new Password then appears and you are asked to enter a passwo rd.
► Ente r the password and press the Enter key.
Confirm new Password requires y ou to confirm the password.
► Ente r the pa ssword again and press the Enter key.
Setup Notice: Changes have been saved is displayed to confirm that the
new password has been saved.
The fi eld Password Entry on Boot is set to Enabled by default. You c an exit the BIOS
Setup once you have finished changing the settings.
► From the Exit menu, choose t he option Exit Saving Changes.
► Press the Enter k ey and select Ye s .
The Table PC reboots and your hard disk is now protected with a password. The
password prompt is enabled as soon as the Tablet PC has rebo oted.
Deactivating hard disk protection
To cancel a password without setting a new one, proceed as follows:
► Call up the BIOS Setup and select the Security menu.
► Mark the Hard Disk Security field and press the Enter key.
► In the Drive0 area ma rk the Set Master Password field and press the Enter key.
You will be initially requested to enter the old password by the Enter current Password prompt.
You will then be requested to enter a new password by the Enter new Password pro m pt.
► Afte r entering the passw ord, press the Enter key three times.
► From the Exit menu, choose t he option Exit Saving Changes.
► Press the Enter k ey and select Ye s .
The Tablet PC reboots and there is no longer any password protection for this hard disk.
SmartCard reader (optional)
Depending on the selected model, your device may be equipped with a SmartCard reader.
Secu
rityfunctions,
Secu
rityfunctions
SmartCards are not su pplied as stand ard equipment. You can use all SmartCards that comply with
the ISO standard 7816-1, -2 or -3. These SmartCards are available from various ma nufacturers.
With th e appropriate software you can use your SmartCard as an alternative to password protection,
but also as a digital signature, for encrypting your e-mails or for home banking.
56 Fujitsu