User Guide
Table Of Contents
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- Chapter 2 How to Scan Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 Various Ways to Scan
- Chapter 5 Daily Care
- Chapter 6 Troubleshooting
- 6.1 Troubleshooting
- Scanner cannot be powered ON.
- The power LED goes off.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- The power LED flashes after power-on.
- A shadow appears at the top or the bottom of the scanned image.
- Images scanned in black & white (or in grayscale or color) are dark.
- Automatic page size detection fails.
- 6.2 Before You Contact the Scanner Service Provider
- 6.3 Checking the Product Labels
- 6.1 Troubleshooting
- Chapter 7 Operational Settings
- Appendix
- Glossary
- Index
Appendix
Appendix
Glossary
Introduction
Index
Contents
69
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
TOP
A.1 Basic Specification
Item Specification Notes
Scanner type Flatbed -
Image sensor CMOS IC -
Light source LED (red, green, blue) -
Scanning area Maximum 148 × 105 (mm) / 5.83 × 4.13 (in.) A6
Scanning speed
(*1)
When the power
cable is connected
Binary (black & white) 1.0 second 200 dpi, A6
Grayscale 1.0 second
Color 1.7 seconds
Binary (black & white) 1.0 second 300dpi, A6
Grayscale 1.0 second
Color 2.5 seconds
When the USB bus
power cable is
connected
Binary (black & white) 2.0 seconds 200 dpi, A6
Grayscale 2.0 seconds
Color 2.0 seconds
Binary (black & white) 2.0 seconds 300dpi, A6
Grayscale 2.0 seconds
Color 2.5 seconds
Optical resolution 600 dpi -