User Guide
Table Of Contents
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- Chapter 2 How to Scan Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 Various Ways to Scan
- Chapter 5 Daily Care
- Chapter 6 Troubleshooting
- 6.1 Troubleshooting
- Scanner cannot be powered ON.
- The power LED goes off.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- The power LED flashes after power-on.
- A shadow appears at the top or the bottom of the scanned image.
- Images scanned in black & white (or in grayscale or color) are dark.
- Automatic page size detection fails.
- 6.2 Before You Contact the Scanner Service Provider
- 6.3 Checking the Product Labels
- 6.1 Troubleshooting
- Chapter 7 Operational Settings
- Appendix
- Glossary
- Index
Chapter 7 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
66
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Scanner
Overview
Operational
Settings
Checking the Sheet Counters [Count]
The approximate total number of sheets scanned on the
flatbed can be checked.
1 Start up the Software Operation Panel.
For details, refer to "7.1 Starting Up the Software Operation Panel"
(page 56).
2 From the listing on the left, select [Device Setting].
In this dialog box, you can check the following items.
7.4 Settings Related to Sheet Counters
Item Description
Total Page Count (FB) Approximate total number of sheets
scanned through the flatbed