User Guide
Table Of Contents
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- Chapter 2 How to Scan Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 Various Ways to Scan
- Chapter 5 Daily Care
- Chapter 6 Troubleshooting
- 6.1 Troubleshooting
- Scanner cannot be powered ON.
- The power LED goes off.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- The power LED flashes after power-on.
- A shadow appears at the top or the bottom of the scanned image.
- Images scanned in black & white (or in grayscale or color) are dark.
- Automatic page size detection fails.
- 6.2 Before You Contact the Scanner Service Provider
- 6.3 Checking the Product Labels
- 6.1 Troubleshooting
- Chapter 7 Operational Settings
- Appendix
- Glossary
- Index
Chapter 7 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
65
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Scanner
Overview
Operational
Settings
Item Description Parameter/Value Factory
Default
Count
(page 66)
Displays the approximate total number of sheets scanned on the
flatbed.
Total Page Count (FB) 0
Power saving
(page 67)
Specify the waiting time before entering power saving mode. Range: 5 to 235 min. (in increments of 5) 15 min.
Power off after a certain period of time: Select to set the scanner
to turn the power off automatically if the scanner is left on for a
certain period of time without being used.
Specify the timeout period for the scanner to be automatically
turned off.
[Power off after a certain period of time] check
box
Selected
1 Hour/2 Hours/4 Hours/8 Hours
(When the [Power off after a certain period of
time] check box is selected)
4 Hours