User Guide
Table Of Contents
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- Chapter 2 How to Scan Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 Various Ways to Scan
- Chapter 5 Daily Care
- Chapter 6 Troubleshooting
- 6.1 Troubleshooting
- Scanner cannot be powered ON.
- The power LED goes off.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- The power LED flashes after power-on.
- A shadow appears at the top or the bottom of the scanned image.
- Images scanned in black & white (or in grayscale or color) are dark.
- Automatic page size detection fails.
- 6.2 Before You Contact the Scanner Service Provider
- 6.3 Checking the Product Labels
- 6.1 Troubleshooting
- Chapter 7 Operational Settings
- Appendix
- Glossary
- Index
Chapter 7 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
56
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Scanner
Overview
Operational
Settings
The Software Operation Panel is installed together with the
PaperStream IP (TWAIN) driver, the PaperStream IP (TWAIN
x64) driver, or the PaperStream IP (ISIS) driver.
This application allows you to check the scanner information
and configure various settings such as the operation of the
scanner.
1 Confirm that the scanner is connected to the computer,
then turn on the scanner.
For details about how to connect the scanner to the computer, refer to
"Connecting the Cables" in Getting Started.
For details about how to turn on the scanner, refer to "1.3 Turning the
Power ON/OFF" (page 15).
2 Display the [Software Operation Panel] dialog box.
z Windows XP/Windows Vista/Windows Server 2008/Windows 7
Click [Start] menu [All Programs] [fi Series]
[Software Operation Panel].
z Windows Server 2012/Windows 8
Right-click the Start screen, and select [All apps] on the app bar
[Software Operation Panel] under [fi Series].
z Windows Server 2012 R2/Windows 8.1
Click [] on the lower left side of the Start screen
[Software Operation Panel] under [fi Series].
To display [], move the mouse cursor.
7.1 Starting Up the Software Operation Panel
ATTENTION
z Do not start up the Software Operation Panel when the scanner is
scanning or the scanner driver's setup dialog box is open.
z Do not use the operator panel while the Software Operation Panel is
running.
z If you connect multiple scanners, the second scanner and so forth
will not be recognized.
Connect only one scanner at a time.