User Guide
Table Of Contents
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- Chapter 2 How to Scan Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 Various Ways to Scan
- Chapter 5 Daily Care
- Chapter 6 Troubleshooting
- 6.1 Troubleshooting
- Scanner cannot be powered ON.
- The power LED goes off.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- The power LED flashes after power-on.
- A shadow appears at the top or the bottom of the scanned image.
- Images scanned in black & white (or in grayscale or color) are dark.
- Automatic page size detection fails.
- 6.2 Before You Contact the Scanner Service Provider
- 6.3 Checking the Product Labels
- 6.1 Troubleshooting
- Chapter 7 Operational Settings
- Appendix
- Glossary
- Index
Appendix
Chapter 6 Troubleshooting
Glossary
Introduction
Index
Contents
TOP
48
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Operational
Settings
Scanner
Overview
Troubleshooting
The power LED flashes after power-on.
Did you unlock the transport lock switch?
No
Turn off the scanner, and unlock the transport lock switch.
For details about how to turn off the scanner, refer to "1.3 Turning the Power ON/
OFF" (page 15).
For details, refer to "Installing the Scanner" in Getting Started.
Yes
Does the power LED flash after turning the power off then
back on?
No
The scanner is operating correctly.
Yes
If the problem persists, check the items in "6.2 Before You Contact the Scanner
Service Provider" (page 52) first, then contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.