User Guide
Table Of Contents
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- Chapter 2 How to Scan Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 Various Ways to Scan
- Chapter 5 Daily Care
- Chapter 6 Troubleshooting
- 6.1 Troubleshooting
- Scanner cannot be powered ON.
- The power LED goes off.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- The power LED flashes after power-on.
- A shadow appears at the top or the bottom of the scanned image.
- Images scanned in black & white (or in grayscale or color) are dark.
- Automatic page size detection fails.
- 6.2 Before You Contact the Scanner Service Provider
- 6.3 Checking the Product Labels
- 6.1 Troubleshooting
- Chapter 7 Operational Settings
- Appendix
- Glossary
- Index
Appendix
Glossary
Introduction
Index
Contents
TOP
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Troubleshooting
Operational
Settings
Scanner
Overview
Daily Care
Chapter 5 Daily Care
This chapter describes how to clean the scanner.
5.1 Cleaning Materials and Locations that Require Cleaning...........................................................................35
5.2 Cleaning the Outside..................................................................................................................................36
5.3 Cleaning the Inside.....................................................................................................................................37
Do not use aerosol spray or spray that contains alcohol. Paper
dust blown up by strong air from the spray may enter inside the
scanner which may cause the scanner to fail or malfunction.
Also note that sparks generated by static electricity may cause a
fire.