User Guide
Table Of Contents
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- Chapter 2 How to Scan Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 Various Ways to Scan
- Chapter 5 Daily Care
- Chapter 6 Troubleshooting
- 6.1 Troubleshooting
- Scanner cannot be powered ON.
- The power LED goes off.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- The power LED flashes after power-on.
- A shadow appears at the top or the bottom of the scanned image.
- Images scanned in black & white (or in grayscale or color) are dark.
- Automatic page size detection fails.
- 6.2 Before You Contact the Scanner Service Provider
- 6.3 Checking the Product Labels
- 6.1 Troubleshooting
- Chapter 7 Operational Settings
- Appendix
- Glossary
- Index
Chapter 4 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
30
How to Scan
Documents
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
Scanning a Book
1 Open the document cover.
For details, refer to "1.4 Opening/Closing the Document Cover" (page
17).
2 Remove the document cover by pulling it out in the
direction of the arrow.
3 Place a document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
4 In the scanner driver, configure the scan settings for using
the flatbed.
For details, refer to the scanner driver's Help.
4.2 Scanning Documents of Different Types and Sizes
ATTENTION
Take note of the following:
z A curled or folded document may create a small gap between
the document and the document bed, causing the scanned
image to be blurred.
z When the document cover is open, light from external sources
such as fluorescent lamps may pass through a document and
affect the brightness of the scanned images. The effect is
stronger for thinner documents. In such cases, close the
document cover before scanning.
Reference point