User Guide
Table Of Contents
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- Chapter 2 How to Scan Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 Various Ways to Scan
- Chapter 5 Daily Care
- Chapter 6 Troubleshooting
- 6.1 Troubleshooting
- Scanner cannot be powered ON.
- The power LED goes off.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- The power LED flashes after power-on.
- A shadow appears at the top or the bottom of the scanned image.
- Images scanned in black & white (or in grayscale or color) are dark.
- Automatic page size detection fails.
- 6.2 Before You Contact the Scanner Service Provider
- 6.3 Checking the Product Labels
- 6.1 Troubleshooting
- Chapter 7 Operational Settings
- Appendix
- Glossary
- Index
Chapter 3 Configuring the Scan Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
27
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
Buttons at the bottom of the dialog box
Different buttons are displayed at the bottom of the dialog box
depending on the purpose of invoking the dialog box from the
application.
z When scanning a document from the TWAIN-enabled application
z When changing the scan settings from the TWAIN-enabled
application
(Scanning is performed after the dialog box is closed.)
z When changing the scan settings from the ISIS-enabled application
(Scanning is performed after the dialog box is closed.)
[Scan] button
Performs a scan with the current scan settings.
[Close] button
Saves the current scan settings and closes the dialog box
(scanning is cancelled).
[OK] button
Saves the current scan settings and closes the dialog box.
[Reset] button
Cancels the changes made on the dialog box and restores the
original settings.
[Cancel] button
Discards the changes made on the dialog box and closes the
dialog box.
[Preview] button
Performs a test-scan with the current settings and displays the
result in the Preview.