User Guide
Table Of Contents
- How to Use This Manual
- Introduction
- Conventions
- Contents
- Chapter 1 Scanner Overview
- Chapter 2 How to Scan Documents
- Chapter 3 Configuring the Scan Settings
- Chapter 4 Various Ways to Scan
- Chapter 5 Daily Care
- Chapter 6 Troubleshooting
- 6.1 Troubleshooting
- Scanner cannot be powered ON.
- The power LED goes off.
- Scanning does not start.
- Scanning takes a long time.
- Image quality is poor when scanning pictures/photos in black & white.
- Quality of scanned text or lines is unsatisfactory.
- Images are distorted or not clear.
- Vertical streaks appear on the scanned image.
- The power LED flashes after power-on.
- A shadow appears at the top or the bottom of the scanned image.
- Images scanned in black & white (or in grayscale or color) are dark.
- Automatic page size detection fails.
- 6.2 Before You Contact the Scanner Service Provider
- 6.3 Checking the Product Labels
- 6.1 Troubleshooting
- Chapter 7 Operational Settings
- Appendix
- Glossary
- Index
Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
12
How to Scan
Documents
Configuring the
Scan Settings
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Scanner
Overview
This section shows the names of the scanner parts.
Front
1.2 Parts and Functions
ATTENTION
Do not use the operator panel while the Software Operation Panel is
running.
Operator panel
Consists of the [Scan] button and power LED.
Can be used to operate the scanner or check the status.
Flatbed
Place a document on the glass section when you scan thick
documents, such as a book or plastic cards, and thin paper.
*1: For details about power saving mode, refer to "1.5 Power Saving
Mode" (page 18).
*2: For details about turning the power on, refer to "1.3 Turning the
Power ON/OFF" (page 15).
*3: For details about the settings for scanning by pressing the [Scan]
button, refer to the scanner driver's Help and "Using a Button on the
Scanner to Start Scanning" (page 32).
[Scan] button
Resumes from power saving mode (*1) and turns the power on (*2).
Starts up the linked application (*3).
Power LED
Lights in green when the scanner is turned on.