UTG-CCGFGA Installation Manual

ManualsBrandsFujitsu ManualsCoolingCeiling Cassette 4-Zone System - 36,000 BTU Outdoor - 9k + 9k + 9k + 9k Indoor - 18.0 SEER

En-1

PART No. 9382827021-02

1. SAFETY PRECAUTIONS

This manual relates to the mounting of the stopper for the intake grille.

Please adhere to the instructions to ensure safety.

DANGER

This mark indicates procedures which, if improperly

performed, are most likely to result in the death of or

serious injury to the user or service personnel.

Never touch electrical components immediately after the power supply

has been turned off. Electrical shock may occur. After turning off the pow-

er, always wait 5 minutes or more before touching electrical components.

WARNING

This mark indicates procedures which, if improp-

erly performed, might lead to the death or serious

injury of the user.

For the air conditioner to operate satisfactorily, install as outlined in this

installation manual.

Do not turn on the power until all installation work is complete.

Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

CAUTION

This mark indicates procedures which, if improperly

performed, might possibly result in personal harm to

the user, or damage to property.

The louver angle cannot be changed if the power is not on.

(If moved by hand, it may be damaged.)

Please refer to the installation manual attached to the indoor unit during

installation.

Let the customer keep this installation manual because it is needed when

changing the direction of intake grille or the filter maintenance.

Do not suspend very heavy weights from the intake grille.

2. ACCESSORIES

The following installation parts are furnished. Use them as required.

Name and shape Q’ty Application

L-angle

For mounting the hook wire to

the intake grille

Hook wire

For suspending the intake grille

Screw (pitch small)

(M4 × 10 mm)

For mounting the hook wire

(for metals)

Screw (pitch large)

(M4 × 10 mm)

For mounting the L-angle and

hook wire (for resins)

Español Français

INSTALLATION MANUAL

AIR CONDITIONER OPTIONAL PARTS

CASSETTE GRILLE

For authorized service personnel only.

3. INSTALLATION PROCEDURE

CAUTION

Please perform this operation before operating the attach the intake grille

of the installation manual attached in the indoor unit.

Please ensure that the screw type is correct.

3.1. Detach the intake grille.

(1) Slide the 2 grille hook

Grille hooks

Standard type

Grid type

Grille hooks

(2) Open the intake grille and remove.

3.2. Mount the L-angle at the 2 positions indicated in diagram

shown below.

Intake grille

Screw (pitch large)

(accessories)

L-angle

(accessories)

Tightening torque:

0.8 to 1.2 N·m (7.1 to 10.6 lbf·in.)

English

Standard type Grid type

IR receiver

700 mm (27-9/16 in)

UTG-CCG*

IR receiver

620 mm (24-7/16 in)

UTG-CCG*G

UTG-CCG*G*

9382827021-02_IM_3L.indb 19382827021-02_IM_3L.indb 1 2021/2/4 10:38:512021/2/4 10:38:51

Summary of content (2 pages)

PAGE 1
AIR CONDITIONER OPTIONAL PARTS PART No. 9382827021-02 CASSETTE GRILLE INSTALLATION MANUAL Standard type English For authorized service personnel only. Grid type UTG-CCG* UTG-CCG*G IR receiver UTG-CCG*G* Français 700 mm (27-9/16 in) 620 mm (24-7/16 in) IR receiver 620 mm (24-7/16 in) 1. SAFETY PRECAUTIONS 3. INSTALLATION PROCEDURE This manual relates to the mounting of the stopper for the intake grille. Please adhere to the instructions to ensure safety.
PAGE 2
3.3. Insert the screw temporarily to the L-angle (left and right 2 positions) 2 to 5 mm (0.079 to 0.197 in.) 3.6. Close the intake grille, and hook the loop of the hook wire to the attached screw at step 3.3. (left and right 2 positions). Screw (pitch small) (accessories) 3.4. Attach the hook wire at the 2 positions indicated in the cassette grille on the opening side of the intake grille.