User Manual Part 4
Table Of Contents
F-04B_E1kou
24
Basic Operation
Before Using
Battery level
Battery level is always displayed on the display, but you can check
it by menu operation etc.
Display unit
a meh
LifeKit
eg
Clock & Other
ee
Info &
Reset
ed
Battery level
Keypad unit
a meh
LifeKit
ei
Keypad unit
ec
Remaining
keypad power
In separated style, while pressing
X
on QWERTY keypad,
press
b
. You can check it by the color of arch light.
Point
・
When FOMA terminal turns ON and the units are joined, if battery level of
either unit becomes 1 and the other unit is in battery level 3, power
feeding is executed automatically (interunit power feeding). A message
appears at the start of power feeding and the power feeding ends when
battery levels of both units become same.
Indication
Display unit
Keypad unit
Sounding by menu
operation
3 times Twice Once
Arch light
Green Yellow Red
Ample charge
Almost exhausted
(Charge the battery)
Before Using
Turning power ON - Configuring default setting
Perform the following operations after turning the power ON for the first time.
a
On numeric keypad,
f
(2 sec. or
more) or on front keypad,
i
(2 sec.
or more)
b
"Yes" or "No" on a confirmation
screen of enlarged menu setting
The screen shown to the right appears.
c
Set required items
eC
[Complete]
Always set Password and Request permit/
deny. If you exit without setting, Initial
setting screen reappears when the power
is turned ON the next time.
d
g
on a confirmation screen of software update
function
The stand-by display appears.
Point
・
When FOMA terminal turn ON with the units joined, after initial settings,
keypad unit is automatically registered as Bluetooth device and
appears on the display.
・
In separated style, you can turn on or off the power per unit. However,
when the power is turned off by pressing front key or
i
while
connecting to Bluetooth, the power of keypad unit also turns off.
・
If no operation is performed, the display light is turned off automatically
according to the settings in Light time-out or Power saving mode. The
display light turns on again if there is any operation or incoming call.
Turning the power off :
On numeric keypad,
f
(2 sec. or more) or on
front keypad,
i
(2 sec. or more)
Changing initial settings :
mehgeg
Changing screen display to English :
mehbfce
Select "English"
<Initial setting screen>