F-02A_E1kou L02.fm Page 23 Tuesday, November 25, 2008 7:58 PM ◆ Charging Accessories and optional devices are not waterproof. Check the following before and after charging. ・ Check that FOMA terminal is not wet. If wet, adequately drain FOMA terminal and wipe off water with dry, clean cloth etc. before connecting a desktop holder or opening the external connection jack cap. ・ When charging the battery after FOMA terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc.
F-02A_E1kou L02.fm Page 24 Tuesday, November 25, 2008 7:58 PM Accessories and main options FOMA AC Adapter 01/02 (including written warranty and operation manual) F-04A (including Back Cover F36 and the written warranty) Battery Pack F09 Instruction manual Man ual * Quick Manual is appended on PXXX.
F-02A_E1kou L03.fm Page 25 Thursday, November 27, 2008 9:48 AM Before Using the Handset Part names and functions ................................................................................................................................................... Viewing display ................................................................................................................................................................... Sub-display/Light overview ........................................
F-02A_E1kou L03.fm Page 26 Thursday, November 27, 2008 9:48 AM Part names and functions i a b j k l m n g c h d o p q r s e h a b c i d k j e f l m g f 26 Before Using the Handset n a Light sensor Sense the ambient luminance (automatic adjustment of the brightness of the display). * Blocking the light sensor may disable correct adjustment of the brightness. b Earpiece Hear other party's voice from here.
F-02A_E1kou L03.fm Page 27 Thursday, November 27, 2008 l Shooting indication light → P67, 186 Camera light for videophone calls, still image shooting or movie recording, or it turns on or blinks for still image shooting or movie recording. m FeliCa mark → P256, 291 Installation of IC card * You can use Osaifu-Keitai by placing it over IC card reader or send/receive data by iC transmission. The IC card cannot be detached. n Infrared data port → P290, 294 Infrared communication, Infrared remote control.
F-02A_E1kou L03.fm Page 28 Thursday, November 27, 2008 i CCamera key ● Start still image shooting, perform the operation shown at the upper right of the guide area. ■ Start movie recording. j aMail/▼ (scroll) key ● Display mail menu, perform the operation shown at the lower right of the guide area. ● Scroll downward the mail screen or site/website display by pages.
F-02A_E1kou L03.fm Page 29 Thursday, November 27, 2008 9:48 AM Viewing display The current state can be checked by the icon appearing on the screen.
F-02A_E1kou L03.
F-02A_E1kou L03.fm Page 31 Thursday, November 27, 2008 9:48 AM ◆ Task area The icon indicating the function (task) in progress appears in the task area. During Multiaccess or Multitasks, the icons show which functions are running.
F-02A_E1kou L03.fm Page 32 Thursday, November 27, 2008 9:48 AM ◆ Guide area Operations that can be performed by pressing m, I, g, C and a are displayed in the guide area. Displayed operations vary by the screen. Display locations and keys correspond as shown in the figure. Guide area b Pressing the keypads corresponding to the item number or pressing the keys below allows you to select an item. :S :* :# :D :T c indicates that there are items that can be selected above and below the cursor position.
F-02A_E1kou L03.fm Page 33 Thursday, November 27, 2008 9:48 AM ❖ Icons and states indicated on the sub stand-by screen m a-k 仮 仮 Sub-display State display (e.g.
F-02A_E1kou L03.fm Page 34 Thursday, November 27, 2008 9:48 AM ❖ Displaying Multi information ❖ Selecting functions from the sub-display menu Multi information enables you to quickly check the details and number of missed calls, recorded messages, unread mail, unread MessageR/F or voice messages in Voice Mail service, the number of steps in Pedometer, i-Channel ticker or calendar.
F-02A_E1kou L03.fm Page 35 Thursday, November 27, 2008 9:48 AM ◆ Displaying light ･ Turn on or blink in the cases below.
F-02A_E1kou L03.fm Page 36 Thursday, November 27, 2008 9:48 AM ❖ Selecting menu items by keypad (Shortcut operations) ❖ Selecting menu items by multi-cursor key When numbers (item number) are assigned to menu items, a menu item can be selected by pressing the corresponding keypad (1-9, 0, *, #). ･ Press the item number displayed with the preferred menu item. ･ Item numbers differ when "Simple Menu" is set by Kisekae Tool.
F-02A_E1kou L03.fm Page 37 Thursday, November 27, 2008 9:48 AM ◆ Selecting method of submenu When "MENU" is displayed at upper-left of the guide area, various operations can be performed with submenus. Selecting the redial submenu ■ Pulldown menu operation Move the cursor to the item to set and press g, and then press the keypads corresponding to the item number.
F-02A_E1kou L03.fm Page 38 Thursday, November 27, 2008 9:48 AM 1 geMove the cursor to an iconeg 仮 g 仮 An icon at the cursor position is surrounded with a red frame. The direction is indicated that it can be moved to by using multi-cursor key. ･ A screen matched for the selected icon appears. (Missed calls) : Received call list appears. With 2in1 in Dual mode, appears when there is a missed call only to Number B and appears when there are missed calls to both Number A and B.
F-02A_E1kou L03.fm Page 39 Thursday, November 27, 2008 9:48 AM ❖ Tilting FOMA terminal ◆ Enabling Motion sensor ■ Rotating the screen display according to the orientation of FOMA terminal While watching 1Seg, displaying Full Browser screen, playing 1Seg video, playing a movie/i-motion or playing Music&Video Channel, tilting FOMA terminal 90 degrees counterclockwise switches the display to the horizontal display. Tilting the terminal 90 degrees clockwise restores the vertical display.
F-02A_E1kou L03.fm Page 40 Thursday, November 27, 2008 9:48 AM ✔INFORMATION ･ Note that forcible installing or removing UIM, or installing battery pack with the tray inserted at a slant may break UIM or the tray. ･ If the tray is removed, press it straight along the guide rail inside the UIM slot with UIM left detached. ◆ Security code Two security codes, "PIN code" and "PIN2 code", are set for UIM. ･ You can change the security codes yourself.
F-02A_E1kou L03.fm Page 41 Thursday, November 27, 2008 9:48 AM ◆ Settings when replacing UIM ◆ UIM types If replacing the currently installed UIM with another UIM, the settings below are changed. When using UIM (blue) in FOMA terminal, note that it differs in the items listed below from UIM (green/white).
F-02A_E1kou L03.fm Page 42 Thursday, November 27, 2008 9:48 AM c With the label side of the battery pack upward, place the convex part of the battery pack to the concave part of FOMA terminal and plug in the direction of a, and fit it in by pressing in the direction of b and close the inner lid. Attaching/Removing battery pack ･ After turning power OFF, fold FOMA terminal and hold it in your hand. ･ Removing battery pack may cause reservation of Software update to be canceled.
F-02A_E1kou L03.fm Page 43 Thursday, November 27, 2008 9:48 AM ■ Removing a Perform the procedure a-b of Attaching. b Pinch the tab of battery pack and pick it up in the direction of the arrow to remove. Tab Charging The battery pack does not have a full charge at time of purchase. Use AC/DC adapter for FOMA terminal to charge the battery before using FOMA terminal. ･ To get the maximum performance from F-04A, use battery pack F09.
F-02A_E1kou L03.fm Page 44 Thursday, November 27, 2008 9:48 AM mail, activating downloaded i-αppli, using i-αppli stand-by display, performing data communication or multiaccess, using camera, playing movie/i-motion, obtaining or playing Music&Video Channel program, playing tunes with Music player, watching or recording 1Seg, etc. ❖ Battery pack life ･ The battery pack is a consumable part. Each time it is charged, time available with each charging reduces.
F-02A_E1kou L03.fm Page 45 Thursday, November 27, 2008 9:48 AM ❖ Charging in a car Using desktop holder standing vertically When pulling out the stand at the rear side of desktop holder, you can use desktop holder standing vertically. ✔INFORMATION ･ Insertion or removal of the AC and DC adapter connectors should be done slowly and Stand carefully so that they are not given excessive force. When disconnecting the connector, pull it straight while pressing the release button.
F-02A_E1kou L03.fm Page 46 Thursday, November 27, 2008 9:48 AM ･ If the battery icon is set with Kisekae Tool in other than "Preinstalled" folder, the battery icon set by default blinks. Remaining battery level Checking battery level A battery icon appearing on the top of the display shows an approximate remaining battery level. (Battery level 3) : Ample charge. (Battery level 2) : Low charge. (Battery level 1) : Very low. Charge the battery.
F-02A_E1kou L03.fm Page 47 Thursday, November 27, 2008 9:48 AM ◆ Operations to perform after turning the power ON at the first time When turning the power ON for the first time, operate in the order of "AdvancedMode setting"→"Initial setting". The settings made can be changed later. ･ When initialization is finished, a confirmation screen of software update function appears. Press g to display the stand-by screen.
F-02A_E1kou L03.fm Page 48 Thursday, November 27, 2008 9:48 AM Select language Changing screen display to English You can select language from Japanese or English (Select language). 1 m [Settings & NW services] 273e1 or 2 ✔INFORMATION ･ This setting is also saved to UIM. ･ Even if setting to "English", the displayed menu is not switched to English in some Kisekae Tool. Note that, when Kisekae Tool in "Preinstalled" folder is set, a menu dedicated to "English" is displayed.
F-02A_E1kou L03.fm Page 49 Thursday, November 27, 2008 9:48 AM ❖ Priority of Caller ID notification There are multiple methods to notify your phone number to the other party. If you set or perform these methods simultaneously, the caller ID operations are performed with the priorities below. The displayed setting and actual Notify/Not notify may differ.
F-02A_E1kou L024.fm Page 405 Friday, November 28, 2008 4:42 PM Specific absorption rate (SAR) of mobile phone ◆ SAR certification information This model phone FOMA F-04A meets the MIC's*1 technical regulation governing exposure to radio waves. The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
F-02A_E1kou L024.fm Page 406 Tuesday, November 25, 2008 8:04 PM ◆ Federal Communications Commission (FCC) Notice ･ This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions : a this device may not cause harmful interference, and b this device must accept any interference received, including interference that may cause undesired operation.
F-02A_E1kou L024.fm Page 407 Tuesday, November 25, 2008 8:04 PM ◆ Important Safety Information AIRCRAFT Switch off your wireless device when boarding an aircraft or whenever you are instructed to do so by airline staff. If your device offers flight mode or similar feature consult airline staff as to whether it can be used on board. DRIVING Full attention should be given to driving at all times and local laws and regulations restricting the use of wireless devices while driving must be observed.
F-02A_E1kou L024.fm Page 408 Tuesday, November 25, 2008 8:04 PM ◆ Trademarks Company and product names mentioned in this manual are trademarks or registered trademarks of their respective holders.
F-02A_E1kou L024.fm Page 409 Tuesday, November 25, 2008 8:04 PM ◆ Others ･ FeliCa is a contactless IC card technology developed by Sony Corporation. ･ This product contains a module developed by the Independent JPEG Group. ･ This product is equipped with the technologies of GestureTek, Inc. Copyright© 2006–2008, GestureTek, Inc. All Rights Reserved.
