Display B24W-5 ECO Operating Manual English
Do you have ... ... any technical questions or problems? Please contact: • our Hotline/Help Desk (please refer to the enclosed Help Desk list or look up the contact details on our website at: "http://ts.fujitsu.com/support/" ) • your sales partner • your sales office The latest information about our products, useful tips, updates etc. is available on our website: "http://ts.fujitsu.
Copyright © Fujitsu Technology Solutions 2009 2009/08 Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 München, Germany Contact http://ts.fujitsu.com/support All rights reserved, including intellectual property rights. Technical data subject to modifi cations and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded.
FUJITSU B24W-5 ECO Operating Manual Your LCD screen...
VESA, DDC and DPMS are registered trademarks of the Video Electronics Standards Association. Copyright © Fujitsu Technology Solutions GmbH 2009 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole. Offenders will be liable for damages. All rights reserved, including rights created by patent grant or registration of a utility model or design. Subject to availability and technical modifications.
Contents Contents Your LCD screen... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents A26361-K1334-Z220-1-7619, edition 1
Your LCD screen... Your LCD screen... has a whole range of useful features and functions, e.g.: • • • TFT display (Thin Film Transistor; active matrix) minimal space requirements thanks to slim casing optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) • high degree of brightness and good contrast • high resolution (1920 x 1200) • presentation of up to 16.
Your LCD screen... Further information Details of how you set the resolution and refresh rate are provided in the documentation for your display adapter and the associated driver software. For ergonomic reasons, a screen resolution of 1920 x 1200 pixels is recommended. Because of the technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a refresh rate of 60 Hz. Notational conventions Pay particular attention to text marked with this symbol.
Important notes Important notes Notes Importantnotes In this chapter you will find information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. If you have any questions, contact your sales outlet or our Help Desk.
Important notes • • • • The device may only be operated in the wide format (0° landscape mode). The buttons of the control panel are located at the bottom in the middle of the monitor. Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it. We recommend that you place your device on a durable, non-slip surface.
Important notes CE marking The shipped version of this device complies with the requirements of EEC directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC "Low voltage directive". Energy Star EnergyStar The Fujitsu LCD colour monitor is equipped with a power management system which reduces the power draw in OFF mode to less than 1 W. As a result, the LCD monitor satisfies the requirements of the U.S. Environmental Protection Agency (EPA).
Important notes Disposal and recycling This device has been manufactured as far as possible from materials which can be recycled or disposed of in such a way that the environment is not damaged. The device may be taken back after use to be reused or recycled, provided that it is returned in a condition that befits its intended use. Any components not reclaimed will be disposed of in an environmentally acceptable manner.
Getting started Getting started Unpacking and checking the delivery The display surface of the device is sensitive to pressure and scratches. Always hold the device by the casing! The complete device package includes: • • • • • • • • one one one one one one one one monitor data cable (D-SUB) data cable (DVI-D) audio cable power cable CD with software and documentation Warranty Booklet "Safety" manual ► ► ► ► Unpack all the individual parts.
Getting started Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). 1 1 ► Position the monitor outside the reach of a light source (1). ► Position the keyboard where it is easiest to reach (1).
Getting started ► Position the monitor so that the eye distance to the screen (1) is around 50 cm. 1 50 cm 1 0 65 ► Position the monitor for optimum viewing (1). The monitor should under no circumstances fall outside the permissible viewing space (2). 30 60 30 65 2 2 Depending on the situation, it may be advisable to use a swivel arm or wall bracket (VESA FPMPMI), which are available from specialist dealers.
Getting started Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base. The display surface is susceptible to scratching! ► Switch off the monitor and pull the power plug out of the power socket. ► Lay the monitor on its face on a soft surface. ► Remove the cover and disconnect all cables. ► Remove the screws (1) on the rear of the monitor. You can now mount a swivel arm or a wall bracket as per VESA FPMPMI with 100 mm hole spacing.
Getting started Connecting the device Please observe the safety information in "Important notes", Page 3. CE conformance and optimum picture quality are guaranteed only if you use the data cables supplied. ► Switch off the monitor and the computer. ► Disconnect the power plug from the computer. Connecting cables to the monitor The data cables supplied have two 15-pin D-SUB connectors or two 24-pin DVI connectors for connection to the monitor and to the computer.
Getting started ► Connect one of the connectors of the data cable to the D-SUB socket or DVI-D socket of the monitor and secure the plug-in connection by tightening the safety screws. The monitor automatically detects the input when only one signal source is connected. ► Insert one plug of the audio line in the AUDIO IN socket on the monitor and make sure it is properly engaged. ► Plug the power cable supplied into the power connector of the monitor. ► Secure the cover over the connections.
Operation Operation Switching the device on and off 1 = Buttons for the OSD menu (On-Screen Display) 2 = Power supply indicator 3 = ON/OFF switch Press the buttons upwards from below. The colour of the LED indicator changes as follows: LED indicator blue green orange does not light up Status Monitor and computer are switched on (normal mode). Monitor and computer are switched on (ECO mode). The monitor is not receiving a video signal or switches into power saving mode. Monitor is switched off.
Operation Front Rear 1 2 1 = power supply indicator 2 = ON/OFF switch ► Switch the device on using the ON/OFF switch. Only switch on the computer after you have switched on the monitor. Notes on power management If your computer is equipped with power management (power-saving mode), the monitor can fully support this function.
Operation Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the display adapter used. Changing the monitor settings with the buttons of the control panel The buttons of the control panel have two functions.
Operation Activate/deactivate ECO operating mode The power consumption of the device can be decreased by reducing the brightness of the picture. ► Press the Forwards / ECO button to switch the ECO operating mode on or off. The message Action was executed appears. If the ECO operating mode is activated, the following OSD settings are changed: Colour temperature Brightness 6500K reduced After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Operation The OSD menu is available in various languages. The English menu names are used in the following description (default setting). You can select another language using the OSD Language function in the OSD Setup menu. ► Press the SELECT/MENU button to activate the OSD menu. The main menu appears, with icons for the setting functions. The first icon, (Brightness/Contrast), is highlighted and the associated functions are visible in the right-hand menu field.
Operation If you wish to change other settings, select the corresponding function from the OSD main menu. All possible adjustments of the main menu are described below. OSD menu functions The OSD menu for analogue monitor operation is described below. During digital operation some functions are not available, they are not needed because of the digital transmission technology being used.
Operation Adjusting the screen size and position Calling the Image adjust setting window H-position * Adjustment of the picture horizontal position V-position * With this function you can move the picture to the left or to the right. Adjusting the picture vertical position Clock * With this function you can move the picture up or down. Adjusting the synchronisation settings This function is used to adjust the picture width, to eliminate vertical picture interference.
Operation Adjusting the display of the OSD menu Calling the OSD Setup adjustment window Language Selecting the language for the OSD menu OSDH position With this function you choose between English (default setting), French, German, Italian and Spanish as the language for the OSD menu. Setting the horizontal position of the OSD menu OSDV position With this function you can move the OSD menu to the left or to the right.
Notes on ergonomic colour adjustment Notes on ergonomic colour adjustment If you select colours for the monitor in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry.
Troubleshooting Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk.
Troubleshooting Having this problem? Check the following points: Picture disturbances (vertical lines) ► Press the EXIT / AUTO button to perform auto-adjustment of the screen. ► Press the EXIT / AUTO button to perform auto-adjustment of the screen. The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be replaced.
Explanatory information about standard ISO 9241-3 Explanatory information about standard ISO 9241-3 Lit or unlit pixels Today’s production techniques cannot guarantee an absolutely fault-free screen display. A few isolated pixels may be constantly lit or unlit. The maximum permitted number of faulty pixels is stipulated in the international standard ISO 9241-3 (Class I). Examples: A 24" flat-screen monitor with a resolution of 1920 x 1200 has 1920 x 1200 = 2,304,000 pixels.
Technical data Technical data Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. B24W-5 ECO Dimensions and weight Visible diagonals Dot pitch Image size Maximum resolution Dimensions incl.
Technical data Ambient conditions Environment class 3K2, DIN IEC 721 Rated range of operation 15 ℃ .... 35 ℃ Humidity Limit range of operation 20 % .... 85 % 5 °C .... 35 °C Humidity 20 % .... 85 % VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer.
Technical data D-SUB port 5 1 10 6 15 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 11 Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V.
Technical data DVI-D port 1 9 17 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 28 Meaning TMDS Data2– TMDS Data2+ TMDS Data 2/4 Shield not connected not connected DDC Clock DDC Data Analog Vertical Sync TMDS Data1– TMDS Data1+ TMDS Data 1/3 Shield not connected not connected +5V Power Earth Hot Plug Detect TMDS Data0– TMDS Data0+ TMDS Data 0/5 Shield not connected not connected TMDS Clock Shield TMDS Clock+ TMDS Clock– A26361-K1334-Z220-1-7619, edition 1
