461V FA LCD-Bildschirm / Moniteur / Monitor / Skärm / Beeldscherm BETRIEBSANLEITUNG OPERATING MANUAL
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an unseren Help Desk (siehe Garantiekarte). Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: http://www.fujitsu-siemens.com Are there ... ... any technical problems or other questions you need clarified? Please contact our Help Desk (see Guarantee Card). The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.fujitsu-siemens.
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.
Deutsch English 461V FA LCD-Bildschirm LCD monitor Moniteur LCD Monitor LCD Monitor LCD LCD-skärm LCD-beeldscherm Français Español Italiano Svenska Nederlands TCO'99 Betriebsanleitung Operating Manual Ausgabe Dezember 2000 December 2000 edition
VESA, DDC und DPMS sind eingetragene Warenzeichen der Video Electronics Standards Association. Copyright ã Fujitsu Siemens Computers GmbH 2000 Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung. Liefermöglichkeiten und technische Änderungen vorbehalten.
Contents Introduction........................................................................................................................................1 Notational conventions ..............................................................................................................2 Important notes .................................................................................................................................2 Safety ................................................................
Introduction Your new LCD (Liquid Crystal Display) monitor 461V FA offers numerous features and functions, for example: • • • • • • • • • • • • • • • TFT display (Thin Film Transistor; active matrix) minimal space requirements thanks to slim housing optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) high degree of brightness and good contrast high resolution (1280x1024) for displaying the information content of a conventional
Color monitor 461V FA Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! i Pay particular attention to texts marked with this symbol. Failure to observe this warning endangers your life, destroys the system, or may lead to loss of data. Supplementary information, remarks and tips follow this symbol. Texts which follow this symbol describe activities that must be performed in the order shown.
Color monitor 461V FA • • • • • • • • • If you use a different data cable from the one supplied, ensure that it is adequately shielded. CE conformance and optimum picture quality are guaranteed only if you use the data cable supplied. No data transmission cable should be connected or disconnected during a thunderstorm. Make sure that no objects (e. g. jewellery chains, paper clips etc.) or liquids get into the inside of the device (danger of electric shock, short circuit). In emergencies (e. g.
Color monitor 461V FA FCC Class B Compliance Statement The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products will appear in the accompanying documentation. NOTE: This equipment has been tested and found to comply with the limits for a "Class B" digital device, pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
Color monitor 461V FA Power cable for devices distributed in the US and Canada In the United States and Canada the cord set must also be UL-listed and CSA-labelled. The voltage rating should be min. 250 volts a.c. Please consult the following table for the selection criteria for power cables used in the United States and Canada.
Color monitor 461V FA Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Product Name: LCD Monitor Trade Name: Fujitsu Siemens Computers Model Number(s): 461V FA Name of Responsible Party: Siemens Information and Communication Products LLC 3860 N.
Color monitor 461V FA Disposal and recycling This device has been manufactured to the greatest possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The device is taken back after use, to be recycled, provided that it is returned in a condition that is the result of normal use. Any components not reclaimed will be disposed of in an environmentally acceptable manner.
Color monitor 461V FA Installing an ergonomic video workstation Window Before you set up your equipment you should select a suitable position for working at the monitor. Please observe the following advises when installing a video workstation. edge of desk permissible reaching sector 600 mm Avoid direct and reflected glare. Avoid glare from electric lighting. Position the keyboard where it is easiest to reach. preferable viewing sector 0° permissible reaching sector 600 mm approx.
Color monitor 461V FA Connecting cables to the monitor The monitor ports are protected by a cover.
Color monitor 461V FA Connecting cables to the computer Information on the computer connections and interfaces is contained in the operating manual for your computer. i If your computer has two monitor ports ("onboard" screen controller and separate graphics card), the monitor port for the separate graphics card is usually active. Ê Connect the data cable to the (active) monitor port on the computer and secure the plug-in connection by tightening the safety screws.
Color monitor 461V FA Switching the monitor on/off A26361-K708-Z100-2-5E19 English - 11
Color monitor 461V FA Notes on power management If your computer is equipped with power management, the monitor can support this function fully. Here the monitor does not distinguish between the individual energy-saving modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect.
Color monitor 461V FA Monitor settings with the buttons of the control panel With the buttons of the control panel, you can make the following settings directly: auto-adjustment of the monitor, adjusting the brightness and adjusting the contrast. i Other settings are carried out via an integrated OSD menu (On-Screen Display). For additional information, refer to the section "Monitor settings using the OSD menu".
Color monitor 461V FA Monitor settings using the OSD menu With the buttons on the control panel, call up and use the integrated OSD (On-Screen Display) menu. i The OSD menu is available in different languages. The English menu names are used in the following description (default setting). With the OSD function LANGUAGE you can select another language. To set the OSD menu, perform the following steps: Ê Briefly press the OK button to activate the OSD menu.
Color monitor 461V FA The OSD menu for analogue monitor operation is described in the following. During digital operation some functions are not available, as they are not required due to the digital transmission technology used. i Setting language for the OSD menu Setting language for the OSD menu (LANGUAGE) You can choose from English (default setting), German, French, Spanish, Italian, and Japanese.
Color monitor 461V FA Setting the picture quality Calling the IMAGE OPTIMIZATION setting window Eliminating picture interference (VIDEO NOISE): Eliminating picture noise and horizontal interference (PHASE) Eliminate vertical interference with local fuzziness (CLOCK) Setting the mode for the optimal display of texts or graphics and pictures (TEXT/GRAPHICS) Setting the colour temperature The "warmth" of the screen colours is set using the colour temperature.
Color monitor 461V FA Selecting input signal The monitor can be operated with analogue or digital signals. With this function you can (depending on the graphics card you use) switch over between the analogue and the digital mode. Calling the INPUT SELECTION setting window Switch on the analogue mode (ANALOG). The monitor processes the signals of the analogue port (VGA/D-SUB). Switch on the digital mode (DIGITAL). The monitor processes the signals of the digital port (DVI-D).
Color monitor 461V FA Removing the monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base: 18 - English A26361-K708-Z100-2-5E19
Color monitor 461V FA Accessories: Power cable (1.8 m) D-SUB data cable (1.8 m) Storable display modes: 28 Electrical data Video: Analogue, positive, 0.7 Vpp, 75 Ω Digital: DVI- Synchronisation: Separate Sync. TTL, positive or negative Composite Sync. TTL, positive or negative Sync. On Green Horizontal frequency: 31 kHz .... 82 kHz (multi-scanning) Refresh rate: 56 Hz .... 85 Hz Maximum pixel rate: 135 MHz Power supply: switches automatically 100 V - 120 V, 50 Hz - 60 Hz ± 2 Hz, 0.
Color monitor 461V FA Preset operating modes The picture position and size have been set to optimum values at the factory for the operating modes listed above. Depending on the screen controller used, it may be necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operation of the monitor"). i The following are the most frequently used of the preset operating modes: Horizontal frequency Refresh rate Screen resolution 31.5 kHz 31.5 kHz 37.5 kHz 37.
Color monitor 461V FA Monitor port DVI-D 1 9 17 Pin Meaning Pin Meaning Pin Meaning 1 TMDS Data2- 9 TMDS Data1- 17 TMDS Data0- 2 TMDS Data2+ 10 TMDS Data1+ 18 TMDS Data0+ 3 TMDS Data 2/4 Shield 11 TMDS Data 1/3 Shield 19 TMDS Data 0/5 Shield 4 TMDS Data4- 12 TMDS Data3- 20 TMDS Data5- 5 TMDS Data4+ 13 TMDS Data3+ 21 TMDS Data5+ 6 DDC Clock 14 +5V Power 22 TMDS Clock Shield 7 DDC Data 15 Ground 23 TMDS Clock- 8 Analogue Vertical Sync 16 Hot Plug Detect 24
Color monitor 461V FA No display (power indicator lights) Ê Ê Check whether the computer is switched on. Ê Ê Press any key on the computer keyboard – the computer may be in energy saving mode. Check whether the data cable for the monitor is correctly attached to the monitor and the monitor port on the computer. Alter the brightness and/or contrast until you get a picture.
