Operating Manual Component PalmSecure ID Match
Thank you for buying an innovative product from Fujitsu. The latest information on our products as well as tips, updates, etc., can be found on our website at: http://www.fujitsu.com/fts You can find driver updates at: http://support.ts.fujitsu.com/download Should you have any technical questions, please contact ● our Hotline/Service Desk (see the Service Desk list or visit: http://support.ts.fujitsu.
Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany http://www.fujitsu.com/fts Copyright © Fujitsu Technology Solutions GmbH 2015. All rights reserved. Edition date 11/2015 Order no.
PalmSecure ID Match Operating Manual PalmSecure ID Match 2 Important notes 4 Ports and control elements 8 Initial startup 11 Using the palm scanner 22 Restore factory default settings 23 Using the SmartCard reader 24 Using the magnetic card reader (optional) 25 Using the Security Lock 26 Technical data 27
Remarks Notes on the product description are consistent with the design specifications from Fujitsu and are made available for comparison purposes. The actual results may differ due to several factors. Technical data is subject to change without notification. Fujitsu does not accept any responsibility for technical or editorial errors or omissions. Trademarks Fujitsu and the Fujitsu logo are registered trade marks of Fujitsu Limited or its subsidiaries in the United States and other countries.
Contents PalmSecure ID Match ......................................................................................................................... 2 Notational conventions ......................................................................................................................... 3 Important notes .................................................................................................................................. 4 Safety notes...................................................
PalmSecure ID Match PalmSecure ID Match FUJITSU PalmSecure ID Match adds a whole new dimension of security to your security solution, whether it is for access protection, protection of data or payment processes. The device offers the facility to record the unique palm scan and store it depending on the desired application, such as on a personal SmartCard. This makes it unnecessary to store biometric patterns in a central database.
PalmSecure ID Match Notational conventions The following notational conventions apply in this manual: ! i ► Refers to important information which must be read. Non-compliance can lead to personal injury, damage to the device or loss of data. If there is any damage to the device which occurs through failure to comply with such warnings, the warranty loses its validity. This symbol indicates important information and tips that are required to use the system properly.
Important notes Important notes In this chapter you will find information regarding safety which it is essential to take note of when working with your device. Safety notes ● Pay attention to the information provided in the "Safety/Regulations" manual and in the following safety notes. ● During installation and while operating the device, please observe the instructions on environmental conditions in the "Technical data“ chapter and the instructions in the "Initial startup" chapter.
Important notes Cleaning the device . ● Switch off the device and all equipment connected to it and remove the mains plug from the mains supply socket. ● Do not clean any interior parts yourself, leave this job to a service technician. ● Do not use any cleaning agents that contain abrasives or that may attack plastic (alcohol, thinners or acetone). ● Never wet-clean the device with water! Water entering into the device could present a serious risk to users (e. g. electric shock).
Important notes Notes/information about the "Ecodesign directive" Regulation 1275/2008, based on the EU Ecodesign Directive (2009/125/EC), defines requirements for the power consumption of electrical and electronic domestic and office devices in stand-by and off mode. Generally, the PalmSecure device was developed for energy-efficient operation and low stand-by losses.
Important notes FCC and Industry Canada compliance statements for unintentional radiators Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC or ICES-003 Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Ports and control elements Ports and control elements Front 9 4 3 2 1 10 5 6 7 8 1= 2= 3= 4= 5= 8 Touch screen for messages and status indicators SmartCard slot (contact-based cards) Hand placement area for palm scanning process Palm scanner Position LED (yellow) for magnetic card reader 6= 7= 8= 9= Magnetic card reader RFID antenna with card placement area Status LED Position LED (yellow) for SmartCard slot (contact-based cards) 10 = Position LED (blue) for hand placement area of the palm scanne
Ports and control elements Bottom 2 3 1 4 5 6 1= 2= 3= Cable cover latch Cable feedthrough for the ports located under the cover (3) Opening for security lock device 4= 5= 6= Cover with further ports, see following page Openings for mounting with screws On/Off switch 9
Ports and control elements Bottom (under cover) 1 1= 2= 10 USB A 2.0 host mode ports Mini USB 2.
Initial startup Initial startup Unpacking and checking the delivery You can operate the device upright e. g. on a table or counter, you can also secure it against slipping and theft using the two screw connections. These screws are not included in the delivery. ! Please follow the safety instructions, see "Safety notes". You should keep the device's original packaging as it may be needed for transporting it in the future.
Initial startup Setting up the device You can operate the device upright e. g. on a table or counter, you can also secure it against slipping and theft using the two screw connections. These screws are not included in the delivery. ! When setting up, make sure to allow the necessary space for the air supply and discharge, see "Technical data“. 1 ► Upright operation: Place the device on a smooth, clean, non-slip surface.
Initial startup Inserting SAM cards (Secure Access Module) Your device is equipped at the front with 2 slots for SAM cards. A SAM card (Secure Access Module) is a microcontroller in the form of a chip card or integrated circuit containing cryptographic functions such as key exchange functions, signature functions and encryptions and is used for the secure transport and storage of cryptographic keys. Both slots are located underneath a cover.
Initial startup 2 1 ► Insert SAM cards in the slot provided (1) or (2) with the chip contacts downwards and with the bevelled corner to the left as shown. ► Close the cover again.
Initial startup Open the bottom cover (LAN, USB, power) To be able to access the ports on the bottom, you must first open the bottom cover: 1 ► Press into the recess (1) and lift the cover. You can now connect external devices to the USB ports, connect the device to a LAN network or connect the mains adapter. ► Once you have connected all the components, close the cover again.
Initial startup Connecting external devices to the USB port You have the option to connect external USB devices to the device. To find out which USB devices are supported, please refer to the SDK documentation or ask your Fujitsu distributor. i The USB devices must be connected or detached while they are switched off, otherwise they will not be recognised.
Initial startup Connecting the device to the power supply You have the following options for connecting the device to the power supply: ● Use the supplied mains adapter via an earthed mains supply socket (see Connect the mains adapter (option 1)). ● LAN port with Power over Ethernet function (see Connect the device to the LAN port (option 2)) i Please note that the power can only be supplied from one source.
Initial startup Connect the mains adapter (option 1) ► Open the cover on the bottom (see "Open the bottom cover (LAN, USB, power)"). 1 4 3 2 ► Connect the power cable (2) to the mains adapter. ► Plug the mains supply plug into an earthed mains supply socket (3). ► Connect the power cable (4) to the power connector (1) of the device (see "Ports and control elements").
Initial startup Connect the device to the LAN port (option 2) Provided the appropriate network infrastructure with Power over Ethernet is available, the device is supplied with power via the LAN port. In addition, you can use it to establish a connection to a local network (LAN = Local Area Network). i Your network administrator can help you in configuring and using the LAN connections and using Power over Ethernet. The network cable is not included in the delivery scope.
Initial startup Switching the device on 1 ► Press the ON/OFF switch (1) on the bottom of the device. The green LED lights up. The example software appears. The example software shows you options for biometric data capture and storage, as well as the matching of this data in a demonstration version. Process Description Enrolment Read and store biometric data using the palm scanner Match on device Match the biometric data with a template on a SmartCard which was stored during enrolment.
Initial startup Switching the device off i Depending on the operating system or application software, you can shut down the system by command. You will find information about this in the documentation for the operating system or the application software. If you shut down the device by pressing the On/Off switch for 4 seconds, this may lead to loss of data.
Using the palm scanner Using the palm scanner The Fujitsu PalmSecure OEM sensor captures a person's palm pattern using near infra-red light. The surface of the hand must be positioned on the hand placement area so that the palm of the hand lies centrally over the palm scanner. In doing so, the palm of the hand and slightly spread fingers should form an even surface. You will be guided through the functions by the example application on the display.
Restore factory default settings Restore factory default settings If the software no longer works correctly, the device can either be returned to the delivery state manually or it can automatically activate a system restore process. In addition, it is possible to reset the configuration of the device or perform a software update. You will find information about this in the documentation of the SDK.
Using the SmartCard reader Using the SmartCard reader The card reader can read and write contact-based cards of type ISO 7816-4 (2) in the SmartCard slot (1), and also RFID cards of type ISO 14443A (3) via the sensitive placement area (4). Depending on the variant of SmartCard reader that was ordered, cards of type Mifare Classic and Desfire are also supported. The SmartCard slot (1) for the contact-based cards is indicated by yellow LEDs.
Using the magnetic card reader (optional) Using the magnetic card reader (optional) If your device is equipped with a magnetic card reader (optional), follow the instructions on the display and slide the magnetic strip of the card through the slot at an even speed between the display frame and the RFID card placement area that is indicated with a yellow position LED. 1 2 ► Position the magnetic strip card (1) on the magnetic card reader (2) which is identified by a yellow position LED.
Using the Security Lock Using the Security Lock Your device has a Security Lock device. You can protect your device against theft using the Security Lock device and the Kensington Lock cable. Please consult the manual for your Kensington Lock.
Technical data Technical data PalmSecure ID Match Electrical data Processor: ARM Cortex A8 single core Rated voltage: 12 V Power consumption Off state: 0.13 W Networked device in standby 3.8 W (device is automatically set into this mode after about 5 minutes or less without system activity) Max. rated current: 0.55 A Dimensions Width x Depth x Height: 262 mm x 122.6 mm x 95.3 mm / 10.31 inches x 4.83 inches x 3.75 inches Weight In basic configuration: Approx. 0.86 kg / 1.
Technical data Mains adapter Electrical data Rated voltage: 100 - 240 V Max.
