User Manual Bluetooth Water Time+ Wi-Fi Hub SWV-02+ GWB-03
www.oralgarden.com Content: iProduct Overview 1. Product Appearance 2. Product Specification 3. Weather Delay 4. Plans and Settings 5. Irrigation History 6.
iv Tips in Operation iii Installations 1.Device connection 2.Smart watering timer binding to gateway 3.Basic information of device 4.Maual Operation 5.Weather delay 6.Plans and settings 7.Irrigation History 8.Non-irrigation time setting 9.Reset Hub&Timer v.Warranty & Warnings Product Overview 1.
2. Product Specifications Working Pressure 0.5bar-8bar (7.25 psi-116 psi) Flow Rate 5L/Min-35L/Min Working Temperature 2℃-50℃ Waterproof IP 54 Inlet NH(US) for 3/4’ faucet/hose BSP (EU) for 1’ or 3/4 faucet/hose Outlet For 3/4" standard garden hose Battery Status Voltage>2.8V:100% 2.6V
Transmission Distance ≥60m Main Function Set and check irrigation schedule through smart phone APP, connecting with Bluetooth water timer or Bluetooth-WIFI hub Manually ON/OFF the water timer With 2 schedule types: Normal Schedule, and Cycle & Soak Max 10 plans in each schedule type Weather delay 24/48/72 hours Irrigation history track to avoid operation error Low power indicator Set non-irrigation time according to local water restriction policy Built-in filter Installations 1. Device Connection 1.
which means the devices is ready to connect. 1.4 Launch Tuya APP, click “ ” button on the top right corner, or tap “Add Device” directly, the App will search for nearby device, press “ Add” when the devices are discovered. Then follow the instructions on the App page to complete pairing. 1.5 Once the connection is complete, the paired devices will be shown on the home page.
2. Smart watering timer binding to gateway 2.1 Once the connection is complete, the pair devices will be displayed on the homepage, Click the Bluetooth-WiFi gateway to enter the device details homepage. 2.2 Click “Add existing” select the device and click “Confirm” to go to the next step. 2.3 Once the binding is complete, the paired device will be displayed on the homepage. Click on the Bluetooth-Wi-Fi gateway to enter the device details homepage.
3. Basic information of the device 3.1 By selecting “Search for devices”, you can also associate more sub-devices. 3.2 Click the Smart Watering Timer to enter the device details pages. This page displays the following information: date, battery status, device status, weather information, irrigation time, last run timer, next run time. 3.3 At the bottom, there is an operation panel with several options: Manual button, Weather Delay, Schedule Setting, Irrigation History, Setting.
To set no-irrigation time. Once this setting is done and enabled, the smart watering timer will skip the pre-irrigation schedule. 3.4 Press the button on the top right 4. corner to enter device information page. Manual Operation Manual mode: Click the “ “ to manually turn ON the water timer to start watering. The default time is 10 mins. Click the “ ” to manually turn off water timer. Tap the central circle to set manual watering time, from 1min to 24 hours. 5.
The soak & Cycle type have different setting options. It needs to set the start time, end time of irrigation, the cycle duration and soak duration. Schedule Type On the schedule page, after select button, there are two types for selection: Normal type and Cycle & Soak type. Normal Schedule: means device watering at a specific time. Cycle & Soak: means the device will run the watering schedule repeatedly in this period.
Schedule Settings Click and choose the schedule type you need and confirm the watering start time, duration, weekdays to water, and save all settings. The Soak & Cycle type have different setting options. It needs to set the start time, end timer of irrigation, the cycle duration and soak duration. *****Tips****** a. The minimum period cannot be greater than the total time period. b. There will be time conflict notice when the time schedule overlap, causing plans fail of setting. c.
Every irrigation plan will be recorded. It’s convenient for users to track the implementation of irrigation plans. 8. Non-irrigation time setting Once this setting is done and enabled, the smart watering timer will skip the pre-irrigation schedule. 9.
1. Press and hold the ON/OFF button of the Bluetooth water timer for more than 5 seconds, LED light will blink, the water timer is now in pairing mode, and reconnect to your smart device. Open the Tuya Smart APP and add the watering timer again. 2. Press and hold the ON/OFF button of the Bluetooth water timer for more than 10 seconds after re-install batteries. The LED light type from blink to stay on for 3 seconds. The device will be restored to the factory setting, and all data will be wiped out.
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Specific Absorption Rate (SAR) information: This Wi-Fi Hub meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.