Thank you for your interest in our products. This manual will help you to master the operation and use of the DR-100. This manual should be read and studied to ensure that the user understands the operation of the DR-100. Please read the Safety Information Manual before use. This manual applies to the model, DR-100 series digital handheld.
Disclaimer We strive for the accuracy and completeness of this manual, but no warranty is given on its content. All the specifications and designs are subject to change without prior notice due to continuous technology development. No part of this manual may be copied, modified, translated or distributed in any form without our prior written authorization. The third-party products referred to in this manual are property of those third parties.
periods, nor place it close to a heat source. ● Do not place the transceiver in a dusty, humid or wet area, nor place on unstable surface. ● If an abnormal odor or smoke is detected coming from the transceiver, switch OFF immediately and remove the battery pack from the transceiver. Contact your dealer. How to use this user manual This manual introduces the basic operation of our compatible DMR handheld transceiver.
CONTENTS Packing list...................................................................................................................................................4 Preparation before operation.......................................................................................................................4 Charge the terminal .....................................................................................................................................
Preparation before operation Packing list Charge the terminal When the terminal is used for the first time, a low power alarm may occur. Turn off the terminal and charge it before using it. (Can support charging bank, car charging, PC terminal and other nominal DC-5V charging mode.) Note: ● Please use our designated charging equipment for charging. ● Please refer to the charging safety information instructions before charging to obtain necessary battery safety information.
3. Observe the TFT color display screen to know the current charging status: Radio Operation TFT Displays the current screen status TFT screen displays Current status ◎ icon flashes,and “charging...”shows on screen. Under charging ◎ icon lights green, and “charge done” shows on screen. Fully charged Installing Audio Accessories 1. Align the audio accessory plug with the accessory interface at the bottom of the terminal and insert it.
Number Part Name 3 MIC Application and function When pressing the [PTT] key to transmit, should speak into the microphone; Distance (3 ~ 5 cm) 4 Menu/OK Standby mode: press it to access the menu list; Menu mode: press it to confirm your current option.
Number Part Name Application and function Note: In order to improve your operation and use convenience, the terminal provides definable keys. 3). Menu mode: Short press it to cancel or exit the current operation mode. Screen ICON introduction Standby mode:Short press to decrease volume level; 11 Down 12 Li-poly battery 13 Type-C USB jack 14 SP/MIC Menu mode: Used for downward selection for channel and other parameters etc. Used to provide power for terminal.
Radio is on high power output 8
9
Programmable Function keys If desired, the following terminal features can be preset for programmable keys: 10
Main functions description 11
Main functions description 12
Main functions description Transmit / Receiving Icons The following icon appears on the radio screen to indicate the radio status.
General guide for fault handling 14
General guide for fault handling 15
16
FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.