User’s Manual
Thank you for purchasing this QS Radio. We believe this easy-to-use radio will provide reliable and dependable communication. QS Radio incorporates the latest advanced technology. As a result, we know that you will be pleased with the quality and features of this product.
1.Multiband TX&RX,dual display dual standby 2.H (High) , M (Medium) , L (Low) output power selective 3.Double frequency, double channel display of the LCD. 4.Built-in VOX function 5.Dual-watch operation 6.Respectively receive/transmit CTCSS/DCS code 7.Repeater shift direction set 8.Auto code search 9.Reverse frequency function 10.Voice scrambler 11.Multi channel steps 12.Frequency deviation setting 13.Busy channel lock 14.Time-out-Timer 15.Channel, channel-frequency, channel-name display. 16.
SUPPLIED ACCESSORIES CONTENTS SUPPLIED ACCESSORIES-----------------------1 CHARGING NOTES(1)(2)----------------------- 2-3 ATTACHING/RELEASING THE BATTERY PACK------- -------------------------4 INSTALLING BELT CLIP---------------------------- 5 INSTALLING EXTERNAL SPEAKER/MICROPHONE--------------------------5 DIAGRAM---------------------------------------------6-7 LCD DISPLAY------------------------------------------ 8 BASIC OPERATION-----------------------------------9 FAST MENU OPERATION FLOW------------
CHARGING NOTES(1) CHARGING NOTES(2) Charging the battery pack: Battery packs are not charged when they are shipped.Charge them before use. Plug the AC adapter into the back of the charger.Then plug the power cable of the adapter into 220V power. Initially charging the battery pack after purchase or extended storage (longer than 2 months) will not bring the battery pack to its greatest capacity or its normal charge, which can be done only after repeated charging and discharging two or three times.
ATTACHING THE BATTERY PACK Slide the battery pack into the back of the radio in the direction of the arrow ( ), then lock it with the battery release button. Slide the battery pack until the battery release button makes a " clicking " sound. RELEASING THE BATTERY PACK Turn off the radio before releasing the battery pack. Push the battery release button in the direction of the arrow( ) as shown below. The battery pack is then released. 4 INSTALLING BELT CLIP Conveniently attaches to your belt.
DIAGRAM Jacklight Antenna connector Power/Volume switch Receive/Transmit indicator lamp PTT switch Monitor Speaker Microphone Ear/Mic jacks Jacklight switch LCD display Battery pack Function key Keypad Up key Down key 6 7
BASIC OPERATION LCD DISPLAY Dual watch operation Priority scan DCS Priority scan channel U-U, V-V, U-V mode Keypad sound Function key H/M/L power Keypad lock VOX transmit function Battery capacity indicator (Full) The rest capacity of the battery P-3 Scan function Battery capacity indicator Note: P-2 Press and hold the Monitor button, then rotate the Power/Volume knob to turn up and down the volume.
FAST MENU OPERATION FLOW NO. Feature LCD Fast key display Parameter Selectable Confirm VFO Page mode 1 Power switch F+1 H/M/L Repeatedly press F+1 H: (5W) M: (2.5W) L: (1W) Auto Auto P14 2 Receive code F+2 RC. *** Press BAND to change the mode and then press or to choose CTCSS (67.0-254.1) DCS (D023N-D754N) DCS (D023I-D754I) MR/ VFO Auto P14 -15 TC. *** Press BAND to change the mode and then press or to choose CTCSS (67.0-254.
NO. Feature Parameter Fast key LCD display 16 Wide/narrow bandwidth F+0+7 W/N * Press 17 Channel delete F+0+8 DEL * H Press or or input numbers directly 18 Reset F+0+9 RESET 19 Upward scanning F+ S Press or 20 Downward scanning F+ S Press or 21 Main/sub channel shift F+MAIN 22 Sending 1750 signal F+PTT TX 1750 23 Cross-band receive/transmit F+LED WX 24 Squelch level F+MON SQL. * 12 Top/bottom rows display shift or Selectable VFO Page Confirm mode NO.
1. On standby mode, press F + 2 , the LCD will displays "RC.***"( as picture 2) 2. Press to change CTCSS/DCS, press OFF to turn it off. CTCSS: 67.0-254.1 RC.off DCS: N023-N754 ( Normal DCS) Picture 2 01 46.025 DCS: I023-I754 ( Inverse DCS) 3. Press or to choose the code. 4. After setting, press to confirm, then it will automatically turn back to the standby mode. RX.T FUNCTION INSTRUCTION BAND NOTICE H This model has double-frequency-display function.
Fequency Deviation Setting (+/-)-----Menu 4 NOTICE This function is a way used with repeater or other working stations. 1. On frequency mode, press F + 4 , the LCD displays as picture 4. 2. By operating it repeatedly, you may select frequency deviation mode between (+) (-). Frequency deviation mode. a. If trasmitting frequency is higher than receiving frequency , it is normal direction (+). b. If trasmitting frequency is lower than receiving frequency, it is inverse direction (-). c.
1. On standby mode, press F + 7 to enter, the LCD displays "R". (as picture8) 2. Operating it repeatedly means turning on or off. 06 440.025 3. After setting, the system will confirm automatically, and return to 01 46.025 standby mode. Picture 8 REV R M H 00 M 00 Example: Main channel frequency is 460.125MHz, sub channel frequency is151.235MHz. Want to set dual watch, operates it as following: 1. On standby mode, press F + 9 to enter, the LCD displays DW (as picture 9). 2.
Using this function, you may set deviation between receving and transmitting. Generally, only repeaters use this. The frequency deviation of this radio is : 0-69.995MHz 1. On standby mode, press F + 0 + 2 to enter, the LCD displays "0.00000". 2. Press numbers to input the frequency deviation you want to set. If you want to input 5MHz, input 0,5,0,0,0. MR/ 3. After setting, press VFO . Press F or PTT to return to standby mode. SET RX.
MR/ 3. After setting, press VFO to confirm, it would remind you whether you would delete. LCD displays "DEL?" RESET MR/ 4. If you want to delete, press VFO to confirm again. 01 46.025 MR/ 3. After setting is finished, press VFO to confirm. Press F or PTT to return to standby mode. 4. If you want upward priority scan, press F + + F . LCD displays "PRI.T". LCD channel displays: 00→01→00→02→00→03 ...... If you want downward priority scan, Press F + + F . LCD displays"PRI.T".
Using this function may shift between main and sub channels when in frequency or channel mode. On standby mode, press F + MAIN , the frequency or channel will shift the top or bottom row. But the "↓"of the upper row main channel will not shift, the frequency/channel that "↓"shows is still the main channel. (as picture 15) H H M 06 440.025 00 M 01 46.025 00 M 06 440.025 00 M 46.
Channel Storing-----Menu 26 RPT When the radio on the frequency working and standby mode, input the desired frequency and parameters. sav MR/ 01 46.025 1. Press key F + VFO , the LCD will displays"SAV**H". (as picture 21). Picture 21 2. Press key or to choose the channel number. MR/ 3. Press key VFO to save or not, the LCD will displays"SAVE?". (as picture 22). MR/ to save again. 4. Press key VFO save ? H 2h M 00 H 01 46.025 00 Example: Channel 3 (same frequency).
Frequency Band Shift-----Menu 30 This function is convenient to choose the frequency band of the radio. 1. On the frequency mode,press key each BAND time to choose the frequency band. The LCD displays "F*". On the frequency mode, input the FM frequency of the radio, the FM frequency range: 88-108MHz.Example: FM frequency: 88.1MHz F0 00.000 Picture 24 1. On the frequency mode . (as picture 24). 08 440.025 2. Input number key 0、8、8、1、0、0 directly. (as picture 25). H 00 00 F0 88. 00 00 H 08 440.
CTCSS 1 2 3 4 5 6 7 8 9 10 11 12 13 6 7 .0 6 9 .3 7 1 .9 7 4 .4 7 7 .0 7 9 .7 8 2 .5 8 5 .4 8 8 .5 9 1 .5 9 4 .8 9 7 .4 1 0 0 .0 14 15 16 17 18 19 20 21 22 23 24 25 26 1 0 3 .5 1 0 7 .2 1 1 0 .9 1 1 4 .8 1 1 8 .8 1 2 3 .0 1 2 7 .3 1 3 1 .8 1 3 6 .5 1 4 1 .3 1 4 6 .2 1 5 1 .4 1 5 6 .7 27 28 29 30 31 32 33 34 35 36 37 38 39 1 5 9 .8 1 6 2 .2 1 6 5 .5 1 6 7 .9 1 7 1 .3 1 7 3 .8 1 7 7 .3 1 7 9 .9 1 8 3 .5 1 8 6 .2 1 8 9 .9 1 9 2 .8 1 9 6 .6 40 41 42 43 44 45 46 47 48 49 50 1 9 9 .5 2 0 3 .5 2 0 6 .
SPECIFICATIONS GENERAL Frequency range RX:136-174MHz，400- 52 0 MHz TX:1 44-148MHz，420-450MH z Frequency sensitivity Rated Voltage Memory channel Antenna disposition Antenna impedance Working manner 5PPm DC7.
