Notice to the user Government law prohibits the operation of unlicensed radio transmitters within the territories under government control. Illegal operation is punishable by fine or imprisonment or both. Acknowledgement Thank you for choosing BelFone series professional radio communication products! Since 1989, BelFone has been dedicating to research and exploration in radio communication technology, and has developed leading smart technologies in the industry.
Instructions befone Use Following the safety precautions below may prevent damage to this product and personal injuries. To avoid potential risks, please read these instructions carefully before using the product, and operate the product as instructed.
Contents Unpacking and Device Inspection ............................................................................................. 4 Standard Accessory ............................................................................................................... 4 Optional Accessory ................................................................................................................ 4 Features ...................................................................................................
Unpacking and Device Inspection Note: The following instructions regarding unpacking are only for BelFone’s distributors, and service agencies or factories authorized by BelFone. Please carefully unpacking the box. Strongly recommend to count the accessories against the following list before discarding the packaging. If you find any item is missing or damaged, please contact the local distributor of BelFone or directly contact BelFone Communication immediately.
Features Digital Repeater Function Support customization, work with BelFone Intelligent IP interconnection system Support customization, IP Multi-site Connect Support customization, work as Simulcast Base Station Over voltage, over temperature alarm and protection Switching High, Middle and Low TX power.
Get Fam miliar with the t Deevice Fro ont Pan nel View w ① LCD D ⑤ P1: Shortt press to d decrease the t channel number, n lo ong press to t display IP P address; (program mming supp ported) ② A Indicattor: Timesllot 1 workin ng ⑥ state ind dication P2: Shortt press to iincrease th he channel number, n lo ong press to t display version (program mming supp ported) ③ B Indica ator: Timesslot 2 worrking ⑦ state ind dication P3: Shortt press to d display TX X frequencyy, long pre ess to displlay IP
in orange o Gre een light / Channel Number N / flickkers (1s) / Normallyy on in Channel Number N T Timeslot 2 emission orange / Flashing g in red Channel Number N / (1s) Ora ange light Green light flicckers (1s) flashes quickly E0 P receivving PLL a abnormalit ty (0.5s) Ora ange light Red ligh ht flickers E1 P transm PLL mitting flicckers (1s) quickly (0.
⑩ AC Power Input Port ⑮ RX RF Input Port ⑫ DC Power Input Port ⑯ TX RF Output Port ⑬ Network Port Basic Operations Power on/off Press the [power switch] on the back of the repeater, the screen will light up and the LCD will display the channel number; and press the [power switch] again, the screen will go dark and the device is shut down. Button Configuration Use the programming software to configure P1~P4 key, while corresponding the P1,P2,P3,P4 key to short pressing and holding-down operations.
3. Low Power: Press this button to switch to lower power, the LCD will display icon: ; 4. Middle Power: Press this button to switch to medium power, the LCD will display icon: 5. High Power: Press this button to switch to high power, the LCD will display icon: 6. Self-Define Power: Press this button to switch to a Self-Defined power, the LCD will display icon: ; 7.
following icon: ; 12. Display Version: Press this button to view the version, the LCD will scroll show the version number; 13. Display IP Address: Press this button to view IP address, the LCD will scroll show the IP address; 14.
19. Squelch Adjustment +: Press this button to adjust squelch level, the LCD show the squelch level of current channel, and then press again the value progressively decrease. Note: While the LCD scroll shows the values and last digit will show repeatedly. Functions and operation instructions Digital Mode 1. Digital Repeater Mode In the repeater mode, if the repeater is transmitting in timeslot 1, indicator A will glow orange, and if the repeater is transmitting in timeslot 2, indicator B will glow orange.
None IP interconnection function is disabled Peer Set to slave (registration of the master repeater required) Master Station Set to master (waiting for slave repeater registration) Master Repeater A type of slave repeater that will automatically become a Backup master repeater when the master repeater fails.
Authorization Code: Peers should have consistent authorization codes with the master repeater for successful registration. For an authorization code, it is allowed to enter a maximum of 16 digits and letters from 0~9 and A~F; it can be null if nothing is entered. DHCP: When a peer is set to DHCP, the router will act as the DHCP server and automatically assign one IP address to the peer.
The repeater can be connected to BelFone intelligent interconnection system (SDC), and supports access to the system network for repeating DMR digital voice and data services, so as to realize interconnected communication in the networked mode. Note: System networking is optional. Back-to-Back Function The repeater supports the back-to-back function to realize back-to-back connection between a single repeater and other device for repeating voice.
Simulcast Function The repeater supports Simulcast function. When the Simulcast function is enabled, the repeater can be registered as a peer with the base station controller of BelFone intelligent interconnection system to realize Simulcast networking. Note: Simulcast function is optional. Technical Specifications General Frequency Range 400-480MHz Channel Spacing 12.5KHz Antenna Impedance 50Ω Master Power Supply 85~264VAC, 47-63Hz 3A/115VAC,1.7A/230VAC Backup Power Supply 11-13.
≤±0.02ppm(With Positioning) 4FSK Digital Modulation 12.5KHz only data:7K60F1D 12.5KHz data and voice:7K60F1E Power of Adjacent Channel ≤60dB Spurious Emission -36dBm<1GHz -30dBm>1GHz Receiving Sensitivity 3%BER≤0.35µV Frequency Stability ≤±0.5ppm(Without Positioning) ≤±0.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.