BF-OG200 instruction Notice to the user Government law prohibits the operation of unlicensed radio transmitters within the territories under government control. Illegal operation is punishable by fine or imprisonment or both. THANK YOU Thank you for purchasing Belfone series professional radio communication products! Since 1989,BelFone has been always engaging in research and exploration of radio communications technologies, in order to lead intelligent technologies in the industry.
Warning! ◆ In inflammable and explosive environment (gas station, gas station, textile factory and other areas with more combustible gas and dust), please turn off the power supply of the walkie-talkie. Precautions It’s important that the operator is aware of and understands hazards common to the operation of any radio.Please observe the following safety precautions to prevent radio damage or personal injury.The following precautions shall be observed during operation, service and repair of this radio.
◆Iff you notice e any prob blems on th he radio, please turn off at first. Then contact with h local dea aler.
Intterphone e accesssories in nstallatio on Ta ake out the e transceive er Ope en the batte ery cover Pussh the batte ery into the e battery ja ar,match th he guides of o the batte ery with the e corrresponding g grooves on the bacck of the ra adio,press down the b battery unttil a click is heard to lock it in n place e battery co over Close the Mountin ng the beltt clip Notte: Don’t atttach/remo ove the batttery if the radio turne ed on
Interphone battery installation If you are using AA battery or No. 5 battery, please install the battery strictly according to the direction on the back of the radio, so as not to reduce the life of the contact by mistake. Suggestion: For better user experience, please choose original Li-ion battery.
Getting Acquainted 1 Micro-USB Charge Jack 7 Speaker 2 ↑/Increment Button 8 Quickly Team Building 3 ↓/Decrement Button 9 PPT key 4 Function Keys 10 Power On/Off Button 5 Microphone(MIC) 11 SOS Button 6 PPT key function keys Including【MENU】【OK】【Flashlight】【Ringtone】
Icoon Ind dicated Launching P Plug in earp phone gtone Ring Receivving F Radio FM X On VOX Scann ning On S Stopwatch B Quicckly Team Building oring Monito T Countdown The Join The Team Quickly Batteryy Capacity V Vibration Mo ode Keyb board Locke ed In ntroducction too Functions and a Op peration ns Press [MENU], then n press [↑//↓] to selec ct the funcction, and the blinking g funcction icon indicates the function n that is cu urrently in use.
1. Power on/off Long press the power button, the walkie-talkie will make "Beep" sound, andthe host self-check screen will show "L" after starting up. Under the power-on state, long press the power button, the walkie-talkie will make a "beep beep" sound to close. 2. Transmit/receive Press and hold downthe PTT key or TALK button to launch, speak tothe MIC. Release the PTT key to receive. 3.
Long press【 ↑/↓ 】 can quickly select channel number. 5.
8. Scanning Through the menu operation, select the scan function (scan icon on the broken code screen ), press [OK] to enter/exit the scanning mode and scan all the configured channels.When a voice signal is scanned in a channel, the loop scan is continued after the end of receiving and after 3 seconds in the channel. Before the scanning function is turned off, the scanning icon on the screen should always be on, and press the PTT key within 3 seconds to specify the reply to the active channel. 9.
. Volume contro ol In standb by mode, directly d ope erate the bu utton [↑/↓]] to adjust the volume e leve el of the sp peaker/hea adset. During operation, accord ding to the current volu ume, the speaker/headset has "Beep" fee edback of correspond c ding volum me leve el, and the volume off 1-8 levelss can be ad djusted. 12.
sound. 13. Flashlight Operate the [flashlight] key on the front of the fuselage to trigger the flashlight LED light to be lit; Short light: Press 3 seconds: follow long light, release and turn off.(Can be used for light signal) Constant light: Long press for 3 seconds, then make a beep to enter the long light mode Blinking: Press stop flashlight + SOS to enter blinking mode Exit normal light or flicker: long press [flashlight] button for 1 second to exit 14. SOS Long press the "SOS" button for 1.
15. VOX Support earphone VOX or bare machine VOX Select VOX Freehold (voice-activated icon on) from the menu Press [OK] to enter and then select the level 1-7 (display in small print and close as "OFF"). Press [OK] to confirm and return to the main interface. Voice control level 1 is the most sensitive. 16.Stopwatch Select the stopwatch feature (stopwatch icon) from the action menu With the countdown icon ), press [OK] to enter the function.
aga ain to start the countd down, timin ng time to countdown n to rang th he bell, by manipulating the [OK] keyboard to o confirm and a close th he bell, the e countdow wn can n be initiate ed in the prrocess of PTT P calls, and a do not interrupt o or suspend d the cou untdown function at th his time if the t termina al is called call, the ccall is inte errupted temporarily, countdown prompt the bell. Notte: Long prress ↑ or ↓ button to o quickly ad djust the co ountdown ttime 18.
auto omatically enter the forbidden f s status. 19. * Exterrnal hea adphone es You need d to choose e the acce essories of this product. After th he earphon ne is inse erted and recognized r d, enter the e earphone e working mode m and the earpho one icon n on the sccreen L Light up. 20. Key prrompt to one Each time e the key is operated d, the prom mpt sound will w be issu ued. The volu ume of the e prompt so ound will change with h the curre ent volume level. 21.
23. Ringto one Support 10 1 differen nt ringing ca all tones optional, thrrough the m menu can be set,, enter the Ringtone Settings menu m , ch hange ring tone number by ↑↓, and d press [OK K] to confirrm the sele ected ring tone. t In standb by mode, short press the [Ringttone] key to o initiate a Ringtone to the current ch hannel and d play the Ringtone R lo ocally. 24.
and subtones will be reset, and channel 1 will be started up) 27. * Charging instruction To use this function, the lithium battery of this product should be selected, which supports 5V power input and charging through the Micro USB interface of the body of the intercom. LED indicator: green meansfull; red means charging. Screen icon indication: when charging power is switched on, the screen battery icon has corresponding animation indication. Note: This product is equipped with charging protection.
29. Receiving and sending instructions Receive: The receive icon on the screen lights up, and the green LED indicator lights up. Launch: The launch icon on the screen lights up and the red LED indicator lights up. Note: The receiving and sending status and charging indicator share LED indicator light. 30. Backlight The screen of this product is equipped with a backlight to operate in dim conditions. 31.
the appropriate size tool for your convenience. CTCSS Standard Frequency Table The tone frequency The tone frequency The tone frequency No. Hz No. Hz No. Hz 1 67 11 97.4 29 179.9 2 71.9 12 100 30 186.2 3 74.4 13 103.5 31 192.8 4 77 14 107.2 32 203.5 5 79.7 15 110.9 33 210.7 6 82.5 16 114.8 34 218.1 7 85.4 17 118.8 35 225.7 8 88.5 18 123 36 233.6 9 91.5 19 127.3 37 241.8 10 94.8 20 131.8 38 250.
No. No. No. No.
59 D134N 80 D311N The tone No. No. No. coding coding coding coding No.
139 D125I 160 D265I 181 D466I 202 D734I 140 D131I 161 D271I 182 D503I 203 D743I 141 D132I 162 D306I 183 D506I 204 D754I 142 D134I 163 D311I 184 D516I The statement In the process of compiling this manual, we have made every effort to be accurate and complete. If you have any questions, please contact us in time. We will give you detailed answers in the first time.
FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.