Document No.
Document No. : ZST300-078 1. Introduction This module is not sold to general end users directly. Therefore there is no user manual of module itself. For the details about this module, please refer to the specification of module. This module should be installed in the host device according to the theory of operation-interface specification (Installation Procedure). 2. Approvals FCC This product is conform to the FCC standards.
Document No. : ZST300-078 3. Requirement of Labeling When selling the host device in which this module was embedded in USA or Canada, the following information must be indicated on the host device. <USA> Contains Transmitter Module FCC ID:W2Z-03000004 or Contains FCC ID:W2Z-03000004 <Canada> Contains IC ID:7736B-03000002 CAN ICES-3(B)/NMB-3(B) FCC/IC NOTICE This device complies with part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs.
Document No. : ZST300-078 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.