Document No.
Document No. : ZST300-052 Contents 1． ． SCOPE............................................................................................................................................... 3 2． ． OVERVIEW ........................................................................................................................................ 3 3． ． COMPANY NAME .............................................................................................................................. 3 4． ． MODEL NAME ....
Document No. : ZST300-052 1． Scope This document applies to the user manual for the contactless IC card reader/writer ICT-3153. 2． Overview The product is a compact, low-power-consumption reader/writer with USB interface. The product is provided with a USB interface; through control from a host controller, it can transmit and receive data to and from many types of contactless IC cards and tags. 3． Company name Company name: FUJIFILM Imaging Systems Co., Ltd.
Document No. : ZST300-052 5-2. Connect product to computer 1) Connect USB mini-B connecter of an attached USB cable to USB port of product. 2) Connect USB A connecter of an attached USB cable to USB port of computer. USB cable Computer USB port Reader/Writer ICT-3153 USB USB Mini-B USB A 5-3. Checking of operations of a product 1) Start a diagnose software. Double click "Diagnose_Software.exe". 2) Click “Start” button. 3) Click “Polling Start” button.
Document No. : ZST300-052 6． Safety instruction (Caution & warning confirmation) 6-1. The product must be evaluated and verified in the final use environment as operationally required. The product uses a high-frequency magnetic field to communicate with contactless IC cards. This means that the characteristics of the communication with cards depend on the ambient noise and/or electromagnetic environment including metals. 6-2.
Document No. : ZST300-052 6-9. The product is a board-type module. It must be safeguarded by installing a protective cover before it is used to prevent dirt, moisture, metal, or the like from adhering to the product. Dirt, moisture, metals, or the like, if adhered to the product, causes a breakdown, fire, or electric shock. 6-10.
Document No. : ZST300-052 7． Specification 7-1. Hardware Specification 7-1-1. Appearance See Attached Drawing 1 7-1-2. Dimensions 97 +/- 0.5 x 60 +/- 0.5 x 12.5 +/- 0.5 mm (Not including protrusion) 7-1-3. Weight Approximately 35 grams 7-1-4. Power Supply Voltage USB Bus-powered +5 VDC +/- 5% (with a ripple voltage of 50 mV or less) 7-1-5. Consumption Current 1) During a carrier halt: 50 mA (max.) 2) During carrier output: 250 mA (max.) 3) In energy saving mode: 0.5mA (max) 7-1-6.
Document No. : ZST300-052 7-1-10. Approvals Radio Act for Japan Internal reader/writer module: Type Certification No.: AC-14051 FCC This product is conform to the FCC standards. FCC Rules (Federal Communications Commission) This product complies with Part 15 Subpart C of the FCC Rules. FCC ID : W2Z-03000001 FCC NOTICE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
Document No. : ZST300-052 7-3. Communication Method Bit coding Transmit Receive Modulation Transmit type Receive Carrier frequency Data speed ISO/IEC 14443 Type A Modified Miller ISO/IEC 14443 Type B NRZ ISO/IEC 18092 FeliCa Manchester Manchester ASK 100% OOK fc=13.56MHz Subcarrier fc/16=847kHz 106kbps(fc/128) NRZ ASK 10％ BPSK fc=13.56MHz Subcarrier fc/16=847kHz 106kbps(fc/128) 212kbps(fc/64) 424kbps(fc/32) 847kbps(fc/16) Manchester ASK 10% ASK fc=13.56MHz 212kbps(fc/64) 424kbps(fc/32) 7-4.
Document No. : ZST300-052 8． Warranty 8-1. Warranty The warranty period shall be 15 months after delivery; provided that the product is used under normal conditions according to this specification. Should a failure occur under normal use during the period, the product will be replaced at no charge. Even during the warranty period, the following problems shall be remedied at cost. 1) Failures caused by improper handling or use not compliant with this specification.
Document No.
Document No.
Document No.
