鍵入文字] [ 802.11b/g/n (WM-N-BM -02_D) Data Sheet Sep 7 2012 Rev 1.0 www.usi.com.tw Data Sheet Of WM-N-BM -02_D WLAN All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 1 .
802.11b/g/n Wireless LAN Daughter board V1.0 Introduction This daughter card featured with full function of 802.11b/g/n (draft n) including both H380A and L330W. This multi- functionality via 21 pins FPC to connect and provides SDIO/SPI/ (option) interface for WiFi. The small size & low profile physical design make it easier for system design to enable high performance wireless connectivity without space constrain.
802.11b/g/n Wireless LAN Daughter board V1.0 Change Sheet Rev. Date Description of change Page Par Change(s) 1.0 09/07/12 All All Draft version for Review Approval & Date All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 3 .
802.11b/g/n Wireless LAN Daughter board V1.0 TABLE OF CONTENTS Introduction ............................................................................................................................................. 2 Features.................................................................................................................................................... 2 1. EXECUTIVE SUMMARY ............................................................................................................
802.11b/g/n Wireless LAN Daughter board V1.0 1. EXECUTIVE SUMMARY The WM-N-BM -02_D is one of the product families in UG’s product offering, targeting for system integration requiring a smaller form factor. It also provides the standard migration to high data rate to UG’s current SIP customers. The purpose of this document is to define the product specification for 802.11b/g/n (draft n) WiFi WMN-BM -02_D.
802.11b/g/n Wireless LAN Daughter board V1.0 2. BLOCK DIAGRAM The WM-N-BM -02_D is designed based on Broadcom 43362 chipset solution. It supports generic SPI (G-SPI), SDIO interface to connect the WLAN to the host processor. A simplified block diagram of the WM-N-BM -02_D is depicted in the Fig. below. WM-N-BM -02_D \ All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 6 .
802.11b/g/n Wireless LAN Daughter board V1.0 3. DELIVERABLES The following products and software will be part of the product. • WM-N-BM -02_D with packaging • Evaluation kits (with SDIO / SPI interface) • Software utility which supporting customer for integration, performance test and homologation. Capable of testing, loading (firmware) and configuring (MAC, CIS) for the WM-N-BM -02_D . • Unit Test / Qualification report • Product Specifications.
02.11b/g/n Wireless LAN Daughter board V1.0 4. REFERENCE DOCUMENTS C.I.S.P.R. Pub. 22 "Limits and methods of measurement of radio interference characteristics of information technology equipment." International Special Committee on Radio Interference (C.I.S.P.R.), Third Edition, 1997. CB Bulletin No. 96A "Adherence to IEC Standards: “Requirements for IEC 950, 2nd Edition and Amendments 1 (1991), 2(1993), 3 (1995) and 4(1996). Product Categories: Meas, Med, Off, Tron.
802.11b/g/n Wireless LAN Daughter board V1.0 5. TECHNICAL SPECIFICATION 5.1. ABSOLUTE MAXIMUM RATING Supply Power Non Operating Temperature Voltage ripple Max +3.6 Volt - 40° to 85° Celsius +/- 2% Max. Values not exceeding Operating voltage 5.2. RECOMMENDABLE OPERATION CONDITION 5.2.1. TEMPERATURE, HUMIDITY The WM-N-BM -02_D has to withstand the operational requirements as listed in the table below.
802.11b/g/n Wireless LAN Daughter board V1.0 5.3. WIRELESS SPECIFICATIONS The WM-N-BM -02_D complies with the following features and standards; Features Description WLAN Standards IEEE 802 Part 11b/g/n (802.11b/g/n) Antenna Port Support Single Antenna for WiFi Frequency Band 2.412 GHz – 2.484 GHz 5.4. RADIO SPECIFICATIONS 802.11B/G/N Features Description Frequency Band 2.4000 GHz – 2.484 GHz (2.
802.11b/g/n Wireless LAN Daughter board V1.0 5.5. ANTNENNA SPECIFICATIONS H380A type: Band Diversity Antenna (Rx Only) 2400 Normal Impedance 50 Operating Frequency 2412-2484 VSWR <2:1 1 Radiated Efficiency 30 1,2 Peak Gain TBD 1,3 Directivitity TBD 1 For reference only. Active measurements are the only requirement. 2 Peak gain measured with 0dBm reference input.
802.11b/g/n Wireless LAN Daughter board V1.0 5.6. REFERENCE CIRCUIT All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 12 .
802.11b/g/n Wireless LAN Daughter board V1.0 5.7. TIMING DIAGRAM OF INTEFACE WIFI BOOT-UP Sequence WIFI BOOT-UP Sequence All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 13 .
802.11b/g/n Wireless LAN Daughter board V1.0 SDIO TIMING SDIO timing in default mode SDIO Bus Timing Parameters (Default Mode) All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 14 .
802.11b/g/n Wireless LAN Daughter board V1.0 SDIO timing in High-Speed Mode SDIO Bus Timing Parameters (High-Speed Mode) All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 15 .
802.11b/g/n Wireless LAN Daughter board V1.0 GSPI Timing Parameter Symbol Minimum Maximum T1 20.8 - Clock high/low T2/T3 (0.45xT1) -T4 Clock rise/fall time T4/T5 - 2.
802.11b/g/n Wireless LAN Daughter board V1.0 5.8. DIMENSIONS, WEIGHT AND MOUNTING The following paragraphs provide the requirements for the size, weight and mounting of the WM-N-BM -02_D . 5.8.1. DIMENSIONS The size and thickness of the WM-N-BM -02_D is “11 mm (W) x 27 mm (L) x 1.8 mm (Max)(H) H380A L330W All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI 17 .
802.11b/g/n Wireless LAN Daughter board V1.0 6. LEGAL, REGULATORY & OTHER TECHNICAL CONSTRAINTS The WM-N-BM -02_D is pre-tested to ensure that all requirements met as set forth in the following sections. Final certification ( certification) requires the antenna of targeted system with a lead-time of 6 weeks. The product deliverable shall be a pre-tested WM-N-BM -02_D . No level certification on WM-N-BM -02_D . 7.
802.11b/g/n Wireless LAN Daughter board V1.0 10 WLAN_RESETB I Active low WLAN reset signal includes an internal 200K Ω pull-down resistor. Within 1.5ms of WL_RST_N being driven high, the PMU changes this from PD to High-Z, Software can optionally enable the pull-down resistor. VIH=1.08V to 3.6V. VIL<0.4V 11 GND I Ground 12 GND I Ground 13 GND I Ground 14 VBAT I Battery supply input (2.8V~5V) 15 VBAT I Battery supply input (2.8V~5V) 16 VBAT I Battery supply input (2.8V~5V) 17 3.
802.11b/g/n Wireless LAN Daughter board V1.0 8. PACKAGE AND STORAGE CONDITION 8.1. PACKAGE DIMENSION 8.2. ESD LEVEL For Additional information, please contact the following: Universal Scientific Industrial Co., Ltd. Headquarters 141, Lane 351, Taiping Road, Sec. 1, Tsao-Tuen, Taiwan, Http://www.usi.com.tw Tel: + 886-49-2350876, 2325876 Fax: +886-49-3439561, 2337360,2351093 E-mail:usi@ms.usi.com.tw All rights are reserved by USI.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This module can be used with FUJIFILM Digital Camera: FinePix S8200W, FinePix S8250W, FinePix S8300W, FinePix S8350W, FinePix S8400W, FinePix S8450W, FinePix S8500W, FinePix S8550W, FinePix S8230W, FinePix S8330W, FinePix S8430W, FinePix S8530W or similar platform with similar dimension, antenna location and RF characteristic.
IC Regulations: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.