Owner’s Manual BL00004927-200 EN
Introduction Thank you for your purchase of this product. Be sure that you have read this manual and understood its contents before using the camera. Keep the manual where it will be read by all who use the product. For the Latest Information The latest versions of the manuals are available from: http://fujifilm-dsc.com/en/manual/ The site can be accessed not only from your computer but also from smartphones and tablets. For information on firmware updates, visit: http://www.fujifilm.
P Chapter Index Menu List 1 Before You Begin iv 1 2 First Steps 27 3 Basic Photography and Playback 47 4 Movie Recording and Playback 53 5 Taking Photographs 61 6 The Shooting Menus 113 7 Playback and the Playback Menu 173 8 The Setup Menus 201 9 Shortcuts 245 10 Peripherals and Optional Accessories 259 11 Connections 281 12 Technical Notes 293 iii
Menu List Camera menu options are listed below. Menu List Shooting Menus Adjust settings when shooting photos or movies. N See page 113 for details.
Menu List P F FLASH SETTING P 149 151 152 154 154 155 156 157 158 161 163 164 165 166 167 167 168 FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING B MOVIE SETTING MOVIE MODE MOVIE AF MODE HDMI OUTPUT INFO DISPLAY 4K MOVIE OUTPUT HDMI REC CONTROL MIC LEVEL ADJUSTMENT MIC/REMOTE RELEASE P 169 170 170 171 171 172 172 The Playback Menu Adjust playback settings. N See page 180 for details.
Setup Menus Adjust basic camera settings. Menu List N See page 201 for details. D USER SETTING FORMAT DATE/TIME TIME DIFFERENCE a MY MENU SETTING SENSOR CLEANING RESET D SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME vi P D SCREEN SETTING EVF BRIGHTNESS 203 EVF COLOR 204 LCD BRIGHTNESS 205 206 LCD COLOR 206 1⁄2 IMAGE DISP. 208 AUTOROTATE DISPLAYS 209 PREVIEW EXP./WB IN MANUAL MODE P PREVIEW PIC.
Menu List P D POWER MANAGEMENT 223 224 226 228 228 229 229 230 230 231 231 232 232 233 P AUTO POWER OFF 234 PERFORMANCE 235 P D SAVE DATA SETTING FRAME NO.
P Table of Contents Introduction ................................................................................. ii For the Latest Information..............................................................ii Menu List...................................................................................... iv Shooting Menus ................................................................................. iv The Playback Menu ...........................................................................
Table of Contents Adjusting Display Brightness and Color ............................ 15 Display Rotation................................................................................ 15 The DISP/BACK Button ................................................................. 16 Customizing the Standard Display ....................................... 17 Using the Menus ......................................................................20 Touch Screen Mode..................................................
4 Movie Recording and Playback 53 F Recording Movies ..............................................................54 Adjusting Movie Settings............................................................ 57 a Viewing Movies...................................................................58 5 Taking Photographs 61 Choosing a Shooting Mode .................................................62 Mode P: Program AE ......................................................................
Table of Contents I Continuous Shooting (Burst Mode) ............................97 Y Advanced Filters ................................................................99 Advanced Filter Options ............................................................100 j Multiple Exposures ......................................................... 101 u Panoramas ........................................................................ 103 Flash Photography................................................................
G AF/MF SETTING ................................................................ 133 FOCUS AREA .....................................................................................133 AF MODE .............................................................................................134 AF-C CUSTOM SETTINGS...........................................................135 STORE AF MODE BY ORIENTATION ......................................136 AF POINT DISPLAY yz.................................................
Table of Contents MOUNT ADAPTOR SETTING ....................................................161 WIRELESS COMMUNICATION .................................................163 F FLASH SETTING................................................................. 164 FLASH FUNCTION SETTING .....................................................164 RED EYE REMOVAL ........................................................................165 TTL-LOCK MODE ....................................................................
RESIZE....................................................................................................187 PROTECT ..............................................................................................188 IMAGE ROTATE .................................................................................189 RED EYE REMOVAL ........................................................................190 VOICE MEMO SETTING ...............................................................
Table of Contents SHUTTER SOUND ...........................................................................212 PLAYBACK VOLUME ......................................................................213 D SCREEN SETTING .............................................................. 214 EVF BRIGHTNESS.............................................................................214 EVF COLOR .........................................................................................215 LCD BRIGHTNESS..............
APERTURE SETTING ......................................................................232 TOUCH SCREEN SETTING ..........................................................233 D POWER MANAGEMENT .................................................. 234 AUTO POWER OFF .........................................................................234 PERFORMANCE................................................................................235 D SAVE DATA SETTING ........................................................
Table of Contents 259 10 Peripherals and Optional Accessories External Flash Units .............................................................. 260 Flash Settings ...................................................................................261 SYNC TERMINAL ..............................................................................263 SHOE MOUNT FLASH ..................................................................264 MASTER(OPTICAL) ............................................................
Table of Contents Connecting to Computers via USB ................................. 287 Windows (MyFinePix Studio) ..................................................287 Mac OS X/macOS...........................................................................287 RAW FILE CONVERTER EX 2.0 ..................................................287 Connecting the Camera ............................................................288 instax SHARE Printers ..........................................................
Supplied Accessories The following are included with the camera: • NP-W126S rechargeable battery • BC-W126 battery charger • EF-X8 shoe mounted flash unit • Body cap • Metal strap clips (× 2) • Clip attaching tool • Protective covers (× 2) • Shoulder strap • Owner’s Manual (this manual) N If you purchased a lens kit, check that a lens is included.
About This Manual This manual contains instructions for your FUJIFILM X-E3 digital camera. Be sure you have read and understood its contents before proceeding. Symbols and Conventions The following symbols are used in this manual: O Information that should be read to prevent damage to the product. N Additional information that may be helpful when using the product. P Pages on which related information may be found. Menus and other text in the displays are shown in bold.
Before You Begin 1
Parts of the Camera 1 Before You Begin A Exposure compensation dial B C D E F G H I J K L 2 .....................................................5, 91 Shutter button............................... 50 Auto mode selector lever .................7 Shutter speed dial ................ 5, 64, 72 Hot shoe ...............................107, 260 Microphone .................................172 Strap eyelet..................................... 28 Connector cover Focus mode selector ....................
Parts of the Camera 1 Before You Begin T Diopter adjustment control ...... 11 e MENU/OK button .......................... 20 U Electronic viewfinder (EVF) f DISP (display)/BACK button ............................................12, 14, 15 ................................................ 16, 176 V Eye sensor ....................................... 14 g a (playback) button................. 51 W VIEW MODE button....................... 14 h Cable channel cover for DC coupler .................................
The Serial Number Plate Do not remove the serial number plate, which provides the FCC ID, KC mark, serial number, and other important information. Before You Begin 1 The Focus Stick (Focus Lever) Tilt or press the focus stick to select the focus area. The focus stick can also be used to navigate the menus.
Parts of the Camera The Shutter Speed Dial The shutter speed dial is used to choose the shutter speed. 1 Before You Begin The Exposure Compensation Dial Rotate the dial to choose an exposure compensation amount.
The DRIVE Button Pressing the DRIVE button displays drive mode options, where you can choose from the following the 1 drive modes. Before You Begin B I O W X V Y Adv.
Parts of the Camera The Auto Mode Selector Lever Switch between auto and manual modes. 1 Mode Select from P (program AE), S (shutter-priority AE), A (aperture-priority AE), and M (manual) modes (P 62, 64, 69, 72). Adjust shutter speed and aperture using program shift (mode P) or set shutter speed and/or aperture manually (modes S, A, and M). Auto mode. The camera adjusts settings automatically according to the option selected by rotating the front command dial.
The Command Dials Rotate or press the command dials to perform the operations listed below. Front Command Dial 1 Before You Begin Rotate • Select menu tabs or page through menus. • Adjust aperture. • Select a scene when shooting in auto mode. • Select an advanced filter when shooting with Y (ADVANCED FILTER) selected in auto mode. • Adjust exposure compensation when C is selected with exposure compensation dial. • Adjust sensitivity (ON selected for ISO COMMAND DIAL SETTING).
Parts of the Camera Rear Command Dial Rotate and aperture (program shift). • Choose a shutter speed. • Adjust settings in the quick menu. • Choose the size of the focus frame. • Zoom in or out during focus zoom or in full frame or multi-frame playback. Press • Perform the function assigned to the DIAL function button. • Press and hold to choose the manual focus mode focus display. • Zoom in on the active focus point during playback. 9 1 Before You Begin • Highlight menu items.
The Indicator Lamp When the viewfinder is not in use, camera status is shown by the indicator lamp. 1 Before You Begin Indicator lamp Camera status Glows green Focus locked. Focus or slow shutter speed warning. Pictures can Blinks green be taken. • Camera on: Recording pictures. Additional pictures Blinks green can be taken. and orange • Camera off: Uploading pictures to a smartphone or tablet. Recording pictures. No additional pictures can be Glows orange taken at this time.
Parts of the Camera The LCD Monitor The LCD monitor also functions as a touch screen that can be used for: • Touch photography (P 23) • Focus area selection (P 22) • Function selection (P 24) • Full-frame playback (P 25) 1 Before You Begin Focusing the Viewfinder The camera is equipped with diopter adjustment in the range −4 to +2 m–1 to accommodate individual differences in vision. Rotate the diopter adjustment control until the viewfinder display is in sharp focus.
Camera Displays This section lists the indicators that may be displayed during shooting. 1 O For illustrative purposes, displays are shown with all indicators lit. Before You Begin Electronic Viewfinder/LCD Monitor 41 12/31/2050 10:00 AM 40 2000 12 3.2 0.
Camera Displays A Focus check ........................... 89, 143 B Depth-of-field preview .........70, 89 C Image transfer status ................192 D Bluetooth ON/OFF .....................241 E Number of frames selected for upload .........................................192 F Movie mode .......................... 54, 169 G Time remaining ............................ 54 H Number of available frames * ...329 I Image quality and size ....115, 116 J Date and time .............44, 204, 205 K Focus frame ...
Before You Begin Choosing a Display Mode Press the VIEW MODE button to cycle through the following display modes: 1 • E EYE SENSOR: Putting your eye to the viewfinder turns the viewfinder on and the LCD monitor off ; taking your eye away turns the viewfinder off and LCD monitor on. • EVF ONLY: Viewfinder on, LCD monitor off. • LCD ONLY: LCD monitor on, viewfinder off. • EVF ONLY + E: Putting your eye to the viewfinder turns the viewfinder on; taking it away turns the viewfinder off.
Camera Displays Display Rotation When ON is selected for D SCREEN SET-UP > AUTOROTATE DISPLAYS, the indicators in the viewfinder and LCD monitor automatically rotate to match camera orientation. 15 Before You Begin Adjusting Display Brightness and Color The brightness and hue of the viewfinder and LCD monitor can be adjusted using the items in the D SCREEN SET-UP menu.
The DISP/BACK Button The DISP/BACK button controls the display of indicators in the viewfinder and LCD monitor. 1 Before You Begin N Indicators for the EVF and LCD must be selected sepa- rately. To choose the EVF display, place your eye to the viewfinder while using the DISP/BACK button. Viewfinder P Standard Information off LCD Monitor Info display Standard 16 3.
Camera Displays Customizing the Standard Display To choose the items shown in the standard display: Display standard indicators. Use the DISP/BACK button to display standard in1 dicators. 2 Select DISP. CUSTOM SETTING. Select D SCREEN SET-UP > DISP. CUSTOM SETTING in the setup menu. 3 Choose items. Highlight items and press MENU/OK to select or deselect.
4 Save changes. Press DISP/BACK to save changes. 5 Exit the menus. Press DISP/BACK as needed to exit the menus and return to the shooting display. 1 Before You Begin N Some indicators are not displayed in all modes. Virtual Horizon Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two lines overlap. Note that the virtual horizon may not be displayed if the camera lens is pointed up or down.
Camera Displays Histograms Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the number of pixels by the vertical axis. Number of pixels 1 • Optimal exposure: Highlights Before You Begin Shadows Pixel brightness Pixels are distributed in an even curve throughout the tone range. • Overexposed: Pixels are clustered on the right side of the graph. • Underexposed: Pixels are clustered on the left side of the graph.
Using the Menus To display the menus, press MENU/OK. Shooting Playback IMAGE QUALITY SETTING 1 PLAY BACK MENU Before You Begin RAW CONVERSION ERASE CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVA VOICE MEMO SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE EXIT EXIT To navigate the menus: 1 Press MENU/OK to display the menus.
Using the Menus 3 Press the focus stick up or down to highlight the tab (H, G, A, F, B, E, C or D) containing the desired item. 4 Press the focus stick right to place the cursor in the menu. 1 through menus and the rear command dial to highlight menu items. The focus stick (focus lever) does not tilt diagonally.
Touch Screen Mode Use touch controls for shooting or playback. Shooting Touch Controls 1 Before You Begin Touch Controls and the EVF If ON is selected for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > TOUCH SCREEN ON/OFF and one of ALL, RIGHT, or LEFT for EVF TOUCH SCREEN AREA SETTINGS, the LCD monitor can be used to select the focus area while pictures are being framed in the electronic viewfinder (EVF).
Touch Screen Mode Mode Description TOUCH Tap your subject in the display to focus and reSHOOTING lease the shutter. Tap to select a focus point. In focus mode S (AF-S), focus will lock, while in focus mode C (AF-C), the AF camera will continually adjust focus in response to changes in the distance to the subject. AREA Tap to select a point for focus or zoom. The focus frame will move to the selected point. OFF Touch controls off. The display does not respond when tapped.
Before You Begin Touch Function Functions can be assigned to the following flick gestures in much the same way as function buttons 1 (P 252): • Flick up: T-Fn1 • Flick left: T-Fn2 • Flick right: T-Fn3 • Flick down: T-Fn4 24
Touch Screen Mode Before You Begin Playback Touch Controls When ON is selected for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > TOUCH SCREEN ON/OFF, touch controls can be used for the following playback operations: 1 Swipe: Swipe a fi nger across the • display to view other images. • Pinch-out: Place two fingers on the display and spread them apart to zoom in. • Pinch-in: Place two fingers on the display and slide them together to zoom out.
Touch Screen Mode • Double-tap: Tap the display twice to zoom in on the focus point. 1 • Drag: View other areas of the im- Before You Begin age during playback zoom.
First Steps 27
Attaching the Strap Attach the strap clips to the camera and then attach the strap. 1 Open a strap clip. Use the clip attaching tool to open a strap clip, making sure that the tool and clip are in the orientations shown. 2 Slide the clip onto the tool. Slide the clip onto the tool so that it hooks over the projection. 3 Place the strap clip on an eyelet. Hook the strap eyelet in the clip opening. Remove the tool, using the other hand to keep the clip in place.
Attaching the Strap 5 Attach a protective cover. Place a protective cover over the eyelet as shown, with the black side of the cover toward the camera. 6 Fasten the strap. Insert the strap through a protective cover and strap clip and fasten as shown. 2 First Steps 4 Pass the clip through the eyelet. Rotate the clip fully through the eyelet until it clicks closed. O To avoid dropping the camera, be sure the strap is correctly secured. Repeat the above steps for the second eyelet.
Attaching a Lens The camera can be used with lenses for the FUJIFILM X-mount. B A First Steps Remove the body cap from the camera and the rear cap from the 2 lens. Place the lens on mount, keeping the marks on the lens and camera aligned (A), and then rotate the lens until it clicks into place (B). O When attaching lenses, ensure that dust or other foreign matter does not enter the camera and be careful not to touch the camera’s internal parts.
Attaching a Lens Removing Lenses To remove the lens, turn the camera off, then press the lens release button (A) and rotate the lens as shown (B). B O To prevent dust accumulating on the A 2 Lenses and Other Optional Accessories The camera can be used with lenses and accessories for the FUJIFILM X-mount. O Before attaching or removing (exchanging) lenses, attach the lens caps and check that the lenses are free of dust and other foreign matter.
Charging the Battery The battery is not charged at shipment. Before use, charge the battery in the supplied battery charger. O An NP-W126S rechargeable battery is supplied with the camera. Charging takes about 150 minutes. 2 Place the battery in the charger. Place the battery in the supplied battery charger as shown. 2 Plug the charger in. Plug the charger into an indoor power outlet. The charging indicator will light. 3 Charge the battery. Remove the battery when charging is complete.
Charging the Battery The Charging Indicator The charging indicator shows battery charge status as follows: Charging indicator Blinks Battery fault. Off Action Insert the battery. 2 Remove the battery. — Unplug the charger and remove the battery. 33 First Steps On Battery status Battery not inserted. Battery fully charged. Battery charging.
O The supplied AC cord is for use exclusively with the supplied battery charger. Do not use the supplied charger with other cords or the supplied cord with other devices. Do not affix labels or other objects to the battery. Failure to observe this precaution could make it impossible to remove the battery from the camera. 2 First Steps Do not short the battery terminals. The battery could overheat. Read the cautions in “The Battery and Power Supply”.
Charging the Battery Charging via Computer The battery also charges if the camera is connected to a computer. Turn the camera off, insert the battery, and connect a Micro USB (Micro-B) USB 2.0 cable as shown, making sure the connectors are fully inserted (choose a cable suitable for data transfer and no more than 1.5 m/4.9 ft. long). 2 First Steps Charging takes about 300 minutes. Battery status is shown by the indicator lamp.
Inserting Batteries and Memory Cards After charging the battery, insert the battery and memory card as described below. 2 1 First Steps Open the battery-chamber cover. Slide the battery-chamber latch as shown and open the battery-chamber cover. A O Do not open the battery-cham- ber cover when the camera is on. Failure to observe this precaution could damage image files or memory cards. Do not use excessive force when handling the battery-chamber cover.
Inserting Batteries and Memory Cards 2 Insert the battery. Using the battery to keep the battery latch pressed to one side, insert the battery contacts first in the direction shown by the arrow. Confirm that the battery is securely latched. 3 First Steps O 2 Insert the battery in the orientation shown. Do not use force or attempt to insert the battery upside down or backwards. The battery will slide in easily in the correct orientation. Insert the memory card.
4 Close the battery-chamber cover. Close and latch the cover. A O If the cover does not close, check that the battery is in the correct orientation. Do not attempt to force the cover shut.
Inserting Batteries and Memory Cards Removing the Battery Before removing the battery, turn the camera off and open the battery-chamber cover. To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown. 2 ture environments. Observe caution when removing the battery. Removing Memory Cards Before removing memory cards, turn the camera off and open the battery-chamber cover.
First Steps Compatible Memory Cards FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera; UHS-I is supported. Cards with a UHS speed class of 3 or better are recommended for movies. A complete list of approved memory cards is available at http://www. 2 fujifilm.com/support/digital_cameras/compatibility/. Operation is not guaranteed with other cards. The camera cannot be used with xD-Picture Cards or MultiMediaCard (MMC) devices.
Inserting Batteries and Memory Cards O Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device. Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card, seek medical assistance immediately. Do not affix labels or other objects to memory cards. Peeling labels can cause camera malfunction. Movie recording may be interrupted with some types of memory card.
Turning the Camera On and Off Use the ON/OFF switch to turn the camera on and off. Rotate the switch to ON to turn the camera on, or to OFF to turn the 2 camera off. First Steps O Fingerprints and other marks on the lens or viewfinder can affect pictures or the view through the viewfinder. Keep the lens and viewfinder clean. N Press the a button to start playback. Press the shutter button halfway to return to shooting mode.
Checking the Battery Level After turning the camera on, check the battery level in the display. Battery level is shown as follows: Description Battery partially discharged. Battery about 80% full. Battery about 60% full. Battery about 40% full. Battery about 20% full. Low battery. Charge as soon as possible. Battery exhausted. Turn camera off and recharge battery.
Basic Setup When you turn the camera on for the first time, you can choose a language and set the camera clock. At default settings, you can also pair the camera with a smartphone or tablet so that you can later synchronize the clocks or download pictures. Follow the steps below when turning the camera on for the first time.
Basic Setup 3 Pair the camera with the smartphone or tablet. Press MENU/OK to pair the camera with a smartphone or tablet running the FUJIFILM Camera Remote app. PAIRING REGISTRATION PAIR WITH SMARTPHONE? IMAGES CAN BE EASILY TRANSFERRED TO SMARTPHONE BY PAIRING SCAN QR CODE OR SEARCH FOR "FUJIFILM Camera Remote" APP ON THE WEB SET SKIP HELP N To skip pairing, press DISP/BACK. Check the time.
Basic Setup Choosing a Different Language To change the language: 2 1 Display language options. Select D USER SETTING > a. 2 Choose a language. Highlight the desired option and press MENU/OK. First Steps Changing the Time and Date To set the camera clock: 1 Display DATE/TIME options. Select D USER SETTING > DATE/TIME. 2 Set the clock. Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change.
Basic Photography and Playback 47
Taking Photographs (Mode P) This section describes how to take pictures using program AE (mode P). See pages 62–73 for information on S, A, and M modes. 1 Select B (STILL IMAGE) drive mode. Press the DRIVE button and select B (STILL IMAGE) from the list of drive mode options. 2 Adjust settings for program AE. 3 Basic Photography and Playback D B A C A Auto mode selector lever (P 7): Select z. B Shutter speed (P 62): Select A (auto). C Focus mode (P 78): Select S (single AF).
Taking Photographs (Mode P) 3 Check the shooting mode. Confirm that P appears in the display. 4 Ready the camera. Hold the camera steady with both hands and brace your elbows against your sides. Shaking or unsteady hands can blur your shots. 3 Basic Photography and Playback To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from the lens and AF-assist illuminator. 5 Frame the picture.
Taking Photographs (Mode P) 6 Focus. Press the shutter button halfway to focus. N If the subject is poorly lit, the AF-assist illuminator may light. Focus indicator Focus frame If the camera is able to focus, it will beep twice and focus area and focus indicator will glow green. Focus and exposure will lock while the shutter button is pressed halfway.
a Viewing Pictures Pictures can be viewed in the viewfinder or LCD monitor. To view pictures full frame, press a. 100-0001 3 N Pictures taken using other cameras are marked with a m (“gift image”) icon to warn that they may not display correctly and that playback zoom may not be available. 51 Basic Photography and Playback Additional pictures can be viewed by pressing the focus stick (focus lever) left or right or rotating the front command dial.
b Deleting Pictures Use the b button to delete pictures. O Deleted pictures cannot be recovered. Copy important pictures to a computer or other storage device before proceeding. 1 3 With a picture displayed full frame, press the b button and select FRAME. Basic Photography and Playback ERASE FRAME SELECTED FRAMES ALL FRAMES 2 Press the focus stick (focus lever) left or right to scroll through pictures and press MENU/OK to delete (a confirmation dialog is not displayed).
Movie Recording and Playback 53
F Recording Movies This section describes how to film movies in auto mode. 4 Movie Recording and Playback 1 Press the DRIVE button and select F (MOVIE) from the list of drive mode options. 2 Rotate the auto mode selector lever to AUTO to shoot movies in S ADVANCED SR AUTO mode. N Rotate the lever to z to shoot movies in mode P. Movies shot with U selected for MOVIE MODE will also be recorded in mode P. 3 54 Press the shutter button to start recording.
Recording Movies 4 Press the button again to end recording. Recording ends automatically when the maximum length is reached or the memory card is full. Using an External Microphone Sound can be recorded with external microphones that connect using jacks 2.5 mm in diameter; microphones that require bus power cannot be used. See the microphone manual for details.
O Sound is recorded via the built-in microphone or an optional external microphone. Do not cover the microphone during recording. Note that the microphone may pick up lens noise and other sounds made by the camera during recording. Vertical or horizontal streaks may appear in movies containing very bright subjects. This is normal and does not indicate a malfunction. N The indicator lamp lights while recording is in progress.
Recording Movies Movie Recording and Playback Adjusting Movie Settings • The movie type, frame size, and frame rate can be selected using B MOVIE SETTING > MOVIE MODE. • The AF-area mode for movie recording is selected using B MOVIE SETTING > MOVIE AF MODE; choose from MULTI and AREA. • Focus mode is selected using the focus mode selector; for continuous focus adjustment, select C, or choose S and enable Intelligent Face Detection (Intelligent Face Detection is not available in focus 4 mode M).
a Viewing Movies View movies on the camera. In full-frame playback, movies are identified by a W icon. 12/31/2050 10:00 AM PLAY ±0 The following operations can be performed while a movie is displayed: 4 Movie Recording and Playback Focus stick Playback in Playback (focus lever) progress ((x x) paused (y (y) Up End playback Pause play- Start/resume Down back playback Single frame Left/right Adjust speed rewind/advance Progress is shown in the display during playback.
Viewing Movies N Press MENU/OK to pause playback and display volume controls. Press the focus stick (focus lever) up or down to adjust the volume; press MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SET-UP > PLAYBACK VOLUME. Playback Speed Press the focus stick (focus lever) left or right to adjust playback speed during playback. Speed is shown by the number of arrows (M or N).
MEMO 60
Taking Photographs 61
Choosing a Shooting Mode For control over shutter speed and aperture (P, S, A, and M modes), rotate the auto mode selector lever to z. Rotate the lever to AUTO to choose from modes suited to specific subject types, or select S ADVANCED SR AUTO to let the camera automatically match the mode to the subject. Taking Photographs Mode P: Program AE Let the camera choose shutter speed and aperture 5 for optimal exposure. Other values that produce the same exposure can be selected with program shift.
Choosing a Shooting Mode Confirm that P appears in the display. O If the subject is outside the metering range of the cam- era, the shutter speed and aperture displays will show “– – –”. Program Shift If desired, you can rotate the rear command dial to select other combinations of shutter speed and aperture without altering exposure (program shift).
Mode S: Shutter-Priority AE Choose a shutter speed and let the camera adjust aperture for optimal exposure. B A C Taking Photographs Adjust settings as follows: 5 A Auto mode selector lever: z B Shutter speed: Choose a shutter speed C Aperture: A (auto) Confirm that S appears in the display. O If the correct exposure cannot be achieved at the select- ed shutter speed, aperture will be displayed in red.
Choosing a Shooting Mode N At settings other than 180X, shutter speed can also be adjusted in increments of 1⁄3 EV by rotating the rear command dial. Shutter speed can be adjusted even while the shutter button is pressed halfway. Sensitivity and Depth of Field If you choose a fast shutter speed when the subject is poorly lit, the camera autoexposure program will select a wider aperture.
Time (T) Rotate the shutter speed dial to T (time) to choose slow shutter speeds for long time-exposures. Use of a tripod is recommended to prevent the camera moving during the exposure. 5 Taking Photographs 1 Rotate the shutter speed dial to T. 2 Rotate the rear command dial to choose a shutter speed. 3 Press the shutter button all the way down to take a picture at the selected shutter speed. At speeds of 1 s or slower, a count-down timer will be displayed while the exposure is in progress.
Choosing a Shooting Mode Bulb (B) Select a shutter speed of B (bulb) for long time-exposures in which you open and close the shutter manually. Use of a tripod is recommended to prevent the camera moving during the exposure. Rotate the shutter speed dial to B. 2 Press the shutter button all the way down.
Using a Remote Release An optional RR-90 remote release can be used for long time-exposures. The RR-90 connects via the Micro USB (Micro-B) USB 2.0 connector. Alternatively, electronic releases from third-party suppliers can be connected via the microphone/remote release connector (⌀2.5 mm 3-pole mini jack). Third-party mechanical releases connect A B 5 as shown.
Choosing a Shooting Mode Mode A: Aperture-Priority AE Choose an aperture and let the camera adjust shutter speed for optimal exposure. B A C Taking Photographs Adjust settings as follows: A Auto mode selector lever: z 5 B Shutter speed: A (auto) C Aperture: Select Z and rotate the lens aperture ring to adjust aperture Confirm that A appears in the display. O If the correct exposure cannot be achieved at the select- ed aperture, shutter speed will be displayed in red.
Previewing Depth of Field When PREVIEW DEPTH OF FIELD is assigned to a function button, pressing the button stops aperture down to the selected setting, allowing depth of field to be previewed in the display. N If both AF DISTANCE INDICATOR and MF DISTANCE INDICATOR are selected in the D SCREEN SET-UP > DISP. CUSTOM SETTING list, depth of field can also be previewed using the depth-of-field indicator in the standard display.
Choosing a Shooting Mode Sensitivity and Motion Blur If you choose a narrow aperture when the subject is poorly lit, the shutter speed selected by the autoexposure program may not be fast enough to prevent motion blur. For faster shutter speeds that reduce motion blur, select a higher sensitivity.
Mode M: Manual Exposure Alter exposure from that selected by the camera. B A C Taking Photographs Adjust settings as follows: A Auto mode selector lever: z 5 B Shutter speed: Choose a shutter speed C Aperture: Select Z and rotate the lens aperture ring to adjust aperture Confirm that M appears in the display. The amount the picture would be under- or over-exposed at current settings is shown by the exposure indicator; adjust shutter speed and aperture until the desired exposure is reached.
Choosing a Shooting Mode Exposure Preview To preview exposure in the LCD monitor, select an option other than OFF for D SCREEN SET-UP > PREVIEW EXP./ WB IN MANUAL MODE. Select OFF when using the flash or on other occasions on which exposure may change when the picture is taken.
Auto Mode The camera adjusts settings automatically according to the option selected by rotating the front command dial. Choose from modes suited to specific subject types, or select S ADVANCED SR AUTO to let the camera automatically match the mode to the subject. 5 Taking Photographs 1 Press the DRIVE button and select B (STILL IMAGE) from the list of drive mode options. 2 Rotate the auto mode selector lever to AUTO. 3 Rotate the front command dial to choose an option.
Choosing a Shooting Mode Mode S ADVANCED SR AUTO h PORTRAIT Z PORTRAIT ENHANCER M LANDSCAPE N Scene selection is also available using A SHOOTING SETTING > SCENE POSITION in the shooting menu. 75 5 Taking Photographs Description The camera automatically optimizes settings to suit the scene. Choose for portraits. Processes portraits to give the subject a smooth, natural-looking complexion. Choose for daylight shots of buildings and landscapes. N SPORT Choose when photographing moving subjects.
Choosing a Shooting Mode S ADVANCED SR AUTO The scene selected by the camera in S ADVANCED SR AUTO mode is shown by an icon in the display. Taking Photographs • a AUTO • c LANDSCAPE • d NIGHT • h NIGHT (TRIPOD) • e MACRO • u BEACH 5 • v SUNSET • w SNOW • x SKY • y GREENERY • z SKY & GREENERY • d PORTRAIT • g BACKLIT PORTRAIT • c MOVING OBJECT • a PORTRAIT&MOTION • b BACKLIT PORTRAIT& MOTION O The mode selected may vary with shooting conditions.
Autofocus Take pictures using autofocus. 1 Rotate the focus mode selector to S or C (P 78). 2 Use G AF/MF SETTING > AF MODE to choose an AF mode (P 80). 3 Choose the position and size of the focus frame (P 82). 4 Take pictures. 5 Taking Photographs N For information on the autofocus system, visit: http://fujifilm-x.com/af/en/index.
Focus Mode Use the focus mode selector to choose how the camera focuses. Choose from the following options: Mode Description Single AF: Focus locks while the shutter button is pressed (AF-S) halfway. Choose for stationary subjects. Continuous AF: Focus is continually adjusted to reflect C changes in the distance to the subject while the shutter (AF-C) button is pressed halfway. Use for subjects that are in motion. Eye-detection AF is not available. Manual: Focus manually using the lens focus ring.
Autofocus The Focus Indicator The focus indicator turns green when the subject is in focus and blinks white when the camera is unable to focus. Brackets (“( )”) indicate that the camera is focusing and are displayed continu- Focus indicator ously in mode C. j is displayed in manual focus mode.
Autofocus Options (AF Mode) Choose how the camera focuses in modes S and C. 1 2 3 Press MENU/OK and go to the shooting menu. Select G AF/MF SETTING > AF MODE. Choose an AF mode. N This feature can also be accessed via shortcuts (P 246). How the camera focuses depends on the focus mode. Focus Mode S (AF-S) 5 Option Description Taking Photographs r Camera focuses on subject in SINGLE selected focus point. Use for pinPOINT point focus on selected subject.
Autofocus Option j ALL Description Sample image Rotate the rear command dial in the focus-point selection display (P 83, 84) to cycle through AF modes in the following order: r SINGLE POINT, y ZONE, and z WIDE. Focus Mode C (AF-C) Option Description Sample image r Focus tracks subject at selected foSINGLE cus point. Use for subjects moving POINT toward or away from camera. ZONE 5 Focus tracks subject in selected focus zone. Use for subjects that are moving fairly predictably.
Focus-Point Selection Choose a focus point for autofocus. Viewing the Focus-Point Display 5 1 2 Press MENU/OK and go to the shooting menu. 3 Use the focus stick (focus lever) and rear command dial to choose a focus area (P 83). Select G AF/MF SETTING > FOCUS AREA to view the focus-point display. N The focus point can also be selected using touch con- Taking Photographs trols (P 22).
Autofocus Selecting a Focus Point Use the focus stick (focus lever) to choose the focus point and the rear command dial to choose the size of the focus frame. The procedure varies with the option selected for AF mode. Focus stick AF mode y z Press Rotate Choose from 6 frame sizes Select focus Select center Choose from point focus point 3 frame sizes Press 5 Restore original size — N Manual focus-point selection is not available when z WIDE/TRACKING is selected in focus mode S.
The Focus-Point Display The focus-point display varies with the option selected for AF mode. N Focus frames are shown by small squares (), focus zones by the large squares. r SINGLE POINT 5 AF mode y ZONE z WIDE/TRACKING Taking Photographs Number of points Choose from zones Position focus frame available can be select- with 7 × 7, 5 × 5, or over subject and press ed using G AF/MF 3 × 3 focus points. MENU/OK. SETTING > NUMBER OF FOCUS POINTS.
Autofocus Burst Mode Focus-Frame Selection When continuous high-speed (8.0 fps, 11 fps, 14 fps) is selected for drive mode, the number of focus frames available in focus mode C drops. Single point Zone Tracking 85 5 Taking Photographs Autofocus Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below. • Very shiny subjects such as mirrors or car bodies. • Subjects photographed through a window or other reflective object.
Autofocus Checking Focus To zoom in on the current focus area for precise focus, press the center of the rear command dial. Press the center of the rear command dial again to cancel zoom. 㹋 Normal display 5 㹋 Focus zoom N In focus mode S, zoom can be adjusted by rotating the Taking Photographs rear command dial when STANDARD or FOCUS PEAK HIGHLIGHT is selected for G AF/MF SETTING > MF ASSIST (P 142).
Manual Focus Adjust focus manually. 1 Rotate the focus mode selector to M. j will appear in the display. 㹋 Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance, right to increase. 3 Take pictures. 5 Taking Photographs 2 N Use D BUTTON/DIAL SETTING > FOCUS RING to reverse the direction of rotation of the focus ring. Regardless of the option selected, manual focus will be used when the lens is in manual focus mode.
Quick Focus To use autofocus to focus on the subject in the selected focus area, press the button to which focus lock or AF-ON has been assigned (the size of the focus area can be chosen with the rear command dial). In manual focus mode, you can use this feature to quickly focus on a chosen subject using either single or continuous AF according to the option chosen for G AF/MF SETTING > INSTANT AF SETTING.
Manual Focus Checking Focus A variety of options are available for checking focus in manual focus mode. Focus Zoom If ON is selected for G AF/MF SETTING > FOCUS CHECK, the camera will automatically zoom in on the selected focus area when the focus ring is rotated. Press the center of the rear command dial to exit zoom. N If STANDARD or FOCUS PEAK HIGHLIGHT is selected for G AF/MF SETTING > MF ASSIST, zoom can be adjusted by rotating the rear command dial.
Manual Focus MF Assist The G AF/MF SETTING > MF ASSIST option can be used to check focus when pictures are framed in the LCD monitor or electronic viewfinder in manual focus mode. N The MF ASSIST menu can be displayed by pressing and holding the center of the rear command dial. Taking Photographs The following options are available: • FOCUS PEAK HIGHLIGHT: Highlights high-contrast outlines. Rotate 5 the focus ring until the subject is highlighted.
d Exposure Compensation Adjust exposure. Rotate the exposure compensation dial. O The amount of compensation available varies with the shooting mode. C (Custom) When the exposure compensation dial is rotated to C, exposure compensation can be adjusted by rotating the front command dial. 5 Taking Photographs set N The front command dial can be used to set exposure compensation to values between −5 and +5 EV.
Focus/Exposure Lock Compose photographs with off-center subjects. 5 Taking Photographs 1 Focus: Position the subject in the focus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock). 2 Recompose: Keep the shutter button pressed halfway. 3 Shoot: Press the button all the way down.
Focus/Exposure Lock The AF-L and AE-L Buttons Focus and exposure can also be locked with the AF-L and AE-L buttons. At default settings, the AF-L button locks focus, the AE-L button exposure. Focus and/or exposure will remain locked while the button is pressed, whether or not the shutter button is pressed halfway. Taking Photographs The roles of the buttons can be changed using the following D BUTTON/DIAL SETTING options: 5 • FUNCTION (Fn) SETTING: Choose the roles played by the AE-L and AF-L buttons.
BKT Bracketing Automatically vary settings over a series of pictures. 1 Press the DRIVE button to display drive mode options. 2 Choose a bracketing type and (if W ISO BKT or V WHITE BALANCE BKT is selected) a bracketing amount. 3 4 Press MENU/OK to end drive mode selection. 5 Taking Photographs 94 Take photographs.
Bracketing O AE BKT Use A SHOOTING SETTING > AE BKT SETTING to choose the bracketing amount and number of shots. Each time the shutter button is pressed, the camera will take the specified number of shots: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount (P 154). N Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system.
Bracketing V WHITE BALANCE BKT Select a bracketing amount (±1, ±2, or ±3). Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount.
I Continuous Shooting (Burst Mode) Capture motion in a series of pictures. Press the DRIVE button to display drive mode options. 2 Select I CONTINUOUS and choose a frame advance rate. 3 Take photographs. The camera will take pictures while the shutter button is pressed; shooting 5 ends when the shutter button is released or the memory card is full. O If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder.
Continuous Shooting (Burst Mode) Focus and Exposure Select focus mode C to vary focus with shot; to vary exposure with each shot, select OFF for D BUTTON/DIAL SETTING > SHUTTER AE. N Selecting a frame rate of 8.0, 11, or 14 fps restricts the choice of focus frames in focus mode C and limits Intelligent Face Detection to the area used for intelligent hybrid AF (TTL contrast-detect AF+phase-detection AF; P 84).
Y Advanced Filters Take photos with filter effects. Press the DRIVE button to display drive mode options. 2 Highlight Y ADVANCED FILTER and press MENU/OK to display advanced filter options. 3 Highlight an advanced filter and press MENU/OK to select the highlighted option and exit to shoot- 5 ing mode. 4 Take photographs. N When the auto mode selector lever is rotated to AUTO, you can rotate the front command dial to choose a filter in the shooting display.
Advanced Filters Advanced Filter Options Choose from the following filters: Filter G TOY CAMERA H MINIATURE I POP COLOR J HIGH-KEY Z LOW-KEY 5 K DYNAMIC TONE Taking Photographs X SOFT FOCUS u PARTIAL COLOR (RED) v PARTIAL COLOR (ORANGE) w PARTIAL COLOR (YELLOW) x PARTIAL COLOR (GREEN) y PARTIAL COLOR (BLUE) z PARTIAL COLOR (PURPLE) Description Choose for a retro toy camera effect. The tops and bottoms of pictures are blurred for a diorama effect. Create high-contrast images with saturated colors.
j Multiple Exposures Create a photograph that combines two exposures. 1 Press the DRIVE button to display drive mode options. 5 Select Adv., then highlight j MULTIPLE EXPOSURE and press MENU/OK to select the highlighted option and return to shooting mode. 3 Take the first shot.
Multiple Exposures 4 Press MENU/OK. The first shot will be shown superimposed on the view through the lens and you will be prompted to take the second shot. NEXT RETRY EXIT N To return to Step 3 and retake the first shot, press the focus stick (focus lever) left. To save the first shot and exit without creating a multiple exposure, press DISP/BACK. 5 5 Take the second shot, using the first frame as a guide.
u Panoramas Follow an on-screen guide to create a panorama. Press the DRIVE button to display drive mode options. 2 Select Adv., then highlight u PANORAMA and press MENU/OK to select the highlighted option and return to shooting mode. 3 To select the size of the angle through which you 5 will pan the camera while shooting, press the focus stick (focus lever) left. Highlight a size and press MENU/OK. 4 Press the focus stick right to view a choice of pan directions.
6 5 Pan the camera in the direction shown by the arrow. Shooting ends automatically when the camera is panned to the end of the guides and the panorama is complete. Sweep camera along yellow line in direction of y ANGLE DIRECTION Taking Photographs For Best Results For best results, use a lens with a focal length of 35 mm or less (50 mm or less in 35 mm format).
Panoramas O If the shutter button is pressed all the way down before the panorama is complete, shooting will end and no panorama may be recorded. Shooting may also be interrupted if the camera is panned too quickly or too slowly. Panning the camera in a direction other than that shown cancels shooting.
Panoramas Viewing Panoramas In full-frame playback, you can use the rear command dial to zoom panoramas in or out. Alternatively, you can play the panorama back using the focus stick (focus lever). PLAY STOP 5 PAUSE Taking Photographs Press the focus stick down to start playback and press again to pause.
Flash Photography Use the supplied EF-X8 shoe-mounted flash unit for additional lighting at night or indoors under low light. 1 Slide the flash onto the hot shoe as shown, stopping when it clicks into place. 2 Raise the flash. O If the flash is not raised, set- 5 3 Select F FLASH SETTING > FLASH FUNCTION SETTING in the camera menus to display options for the EF-X8. Taking Photographs tings will be adjusted for units connected via the sync terminal (P 263).
4 5 Highlight items using the focus stick (focus lever) and rotate the rear command dial to change the highlighted setting (P 109). MODE SUPPLIED FLASH ADJUST END Press DISP/BACK to put the changes into effect. O Depending on the distance to the subject, some lenses may cast shadows in photos taken with the flash. The flash will not fire at some settings, for example in panorama mode or when the electronic shutter is used.
Flash Photography Flash Settings The following settings are available when the supplied EF-X8 shoe-mounted flash unit is attached. MODE SUPPLIED FLASH ADJUST Setting mode Description Choose from the following options: • TTL: TTL mode. Adjust flash compensation (B) and choose a flash mode (C). • M: The flash fires at the selected output (B) regardless of subject brightness or camera settings. Output is expressed in fractions of full power, from ⁄ to ⁄.
Setting Description Adjust flash level. The options available vary with sation/output the flash control mode (A). Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken.
Flash Photography Red-Eye Removal Red-eye removal is available when an option other than OFF is selected for F FLASH SETTING > RED EYE REMOVAL and G AF/MF SETTING > FACE/EYE DETECTION SETTING is ON. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas. Flash Sync Speed The flash will synchronize with the shutter at shutter speeds of 1⁄180 s or slower.
MEMO 112
The Shooting Menus 113
H IMAGE QUALITY SETTING Adjust image quality settings. To display image quality settings, press MENU/OK in the shooting display and select the H (IMAGE QUALITY SETTING) tab. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE EXIT N The options available vary with the shooting mode selected.
IMAGE QUALITY SETTING IMAGE SIZE Choose the size and aspect ratio at which still pictures are recorded. Option O3:2 P3:2 Q3:2 Image size Option 6000 × 4000 O 16 : 9 4240 × 2832 P 16 : 9 3008 × 2000 Q 16 : 9 Image size Option 6000 × 3376 O 1 : 1 4240 × 2384 P 1 : 1 3008 × 1688 Q 1 : 1 Image size 4000 × 4000 2832 × 2832 2000 × 2000 N IMAGE SIZE is not reset when the camera is turned off or another shooting mode is selected.
IMAGE QUALITY Choose a file format and compression ratio. Select FINE or NORMAL to record JPEG images, RAW to record RAW images, or FINE+RAW or NORMAL+RAW to record both JPEG and RAW images. FINE and FINE+RAW use lower JPEG compression ratios for higher-quality JPEG images, while NORMAL and NORMAL+RAW use higher JPEG compression ratios to increase the number of images that can be stored.
IMAGE QUALITY SETTING RAW RECORDING Choose whether to compress RAW images. Option Description UNCOMPRESSED RAW images are not compressed. RAW images are compressed using a reversible algorithm that reduces file size with no loss of imLOSSLESS age data. The images can be viewed in RAW FILE COMPRESSED CONVERTER EX 2.0 or other software that supports “lossless” RAW compression.
FILM SIMULATION Simulate the effects of different kinds of film, including black-and-white (with or without color filters). Choose a palette according to your subject and creative intent. Option c PROVIA/ STANDARD d Velvia/VIVID e ASTIA/SOFT 6 The Shooting Menus i CLASSIC CHROME g PRO Neg. Hi h PRO Neg. Std 118 Description Standard color reproduction. Suited to a wide range of subjects, from portraits to landscapes. A high-contrast palette of saturated colors, suited to nature photos.
IMAGE QUALITY SETTING Option Description Take black-and-white photos with rich grada* a ACROS tion and outstanding sharpness. b MONOCHROME * Take pictures in standard black and white. Take pictures in sepia. f SEPIA * Available with yellow (Ye), red (R), and green (G) filters, which deepen shades of gray corresponding to hues complementary to the selected color. The yellow (Ye) filter deepens purples and blues and the red (R) filter blues and greens.
GRAIN EFFECT Add a film grain effect. Select an amount (STRONG or WEAK) or choose OFF to turn film grain off.
IMAGE QUALITY SETTING DYNAMIC RANGE Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to reduce loss of detail in highlights and shadows when photographing high-contrast scenes.
WHITE BALANCE For natural colors, choose a white balance option that matches the light source. 6 The Shooting Menus Option Description AUTO White balance is adjusted automatically. k/l/m Measure a value for white balance. k Choose a color temperature. i For subjects in direct sunlight. j For subjects in the shade. k Use under “daylight” fluorescent lights. l Use under “warm white” fluorescent lights. m Use under “cool white” fluorescent lights. n Use under incandescent lighting.
IMAGE QUALITY SETTING Fine-Tuning White Balance Pressing MENU/OK after selecting a white balance option displays the dialog shown at right; use the focus stick (focus lever) to fine-tune white balance or press DISP/BACK to exit without fine-tuning. WB SHIFT AUTO R:0 B:0 SET N The focus stick (focus lever) does not tilt diagonally.
Custom White Balance Choose k, l, or m to adjust white balance for unusual lighting conditions. White balance measurement options will be displayed; frame a white object so that it fills the display and press the shutter button all the way down to measure white balance (to select the most recent custom value and exit without measuring white balance, press DISP/BACK, or press MENU/OK to select the most recent value and display the fine-tuning dialog).
IMAGE QUALITY SETTING k: Color Temperature Selecting k in the white balance menu displays a list of color temperatures; highlight a color temperature and press MENU/OK to select the highlighted option and display the fine-tuning dialog. WHITE BALANCE COLOR TEMPERATURE R:0 B:0 SET SHIFT 125 6 The Shooting Menus Color Temperature Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K).
HIGHLIGHT TONE Adjust the appearance of highlights. Choose from seven options between +4 and −2. +4 +3 +2 Options +1 0 −1 −2 6 SHADOW TONE The Shooting Menus Adjust the appearance of shadows. Choose from seven options between +4 and −2.
IMAGE QUALITY SETTING COLOR Adjust color density. Choose from nine options between +4 and −4. +4 +3 +2 +1 Options 0 −1 −2 −3 −4 +4 +3 +2 +1 Options 0 −1 −2 −3 −4 127 The Shooting Menus 6 SHARPNESS Sharpen or soften outlines. Choose from nine options between +4 and −4.
NOISE REDUCTION Reduce noise in pictures taken at high sensitivities. Choose from nine options between +4 and −4. +4 +3 +2 +1 Options 0 −1 −2 −3 −4 6 LONG EXPOSURE NR The Shooting Menus Select ON to reduce mottling in long time-exposures.
IMAGE QUALITY SETTING LENS MODULATION OPTIMIZER Select ON to improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens. Options ON OFF The Shooting Menus 6 COLOR SPACE Choose the gamut of colors available for color reproduction. Option Description sRGB Recommended in most situations. Adobe RGB For commercial printing.
PIXEL MAPPING Use this option if you notice bright spots in your pictures. 1 Press MENU/OK in the shooting display and select the H IMAGE QUALITY SETTING tab. 2 Highlight PIXEL MAPPING and press MENU/OK to perform pixel mapping. Processing may take a few seconds. O Results are not guaranteed. Be sure the battery is fully charged before beginning pixel mapping. 6 The Shooting Menus Pixel mapping is not available when the camera temperature is elevated.
IMAGE QUALITY SETTING SELECT CUSTOM SETTING Recall settings saved with EDIT/SAVE CUSTOM SETTING. Settings can be recalled from any of the seven custom settings banks. Banks CUSTOM 1 CUSTOM 2 CUSTOM 3 CUSTOM 4 CUSTOM 5 CUSTOM 6 CUSTOM 7 1 Press MENU/OK in shooting mode to display the shooting menu. Select the H IMAGE QUALITY SETTING tab, then highlight EDIT/SAVE CUSTOM SETTING and press MENU/OK.
IMAGE QUALITY SETTING 2 3 4 6 Highlight a custom settings bank and press MENU/OK to select. Adjust the following as desired: • ISO • DYNAMIC RANGE • FILM SIMULATION • GRAIN EFFECT • WHITE BALANCE • HIGHLIGHT TONE • SHADOW TONE • COLOR • SHARPNESS • NOISE REDUCTION Press DISP/BACK. A confirmation dialog will be displayed; highlight OK and press MENU/OK.
G AF/MF SETTING Adjust focus settings. To display focus settings, press MENU/OK in the shooting display and select the G (AF/MF SETTING) tab. AF/MF SETTING FOCUS AREA AF MODE AF-C CUSTOM SETTINGS STORE AF MODE BY ORIENTATION AF POINT DISPLAY NUMBER OF FOCUS POINTS PRE-AF AF ILLUMINATOR EXIT N The options available vary with the shooting mode selected. The Shooting Menus 6 FOCUS AREA Choose the focus area for autofocus, manual focus, and focus zoom.
AF MODE Choose the AF mode for focus modes S and C. Option 6 The Shooting Menus Description The camera focuses on the subject in the selected focus r point. The number of focus points available can be selectSINGLE ed using G AF/MF SETTING > NUMBER OF FOCUS POINT POINTS. Use for pin-point focus on a selected subject. The camera focuses on the subject in the selected focus y zone. Focus zones include multiple focus points, makZONE ing it easier to focus on subjects that are in motion.
AF/MF SETTING AF-C CUSTOM SETTINGS Select focus-tracking options for focus mode C. Choose from Sets 1–5 according to your subject. AF-C CUSTOM SETTINGS SET 1 STANDARD SETTING FOR MULTI-PURPOSE OK Option SET 1 STANDARD SETTING FOR MULTI-PURPOSE Description A standard tracking option that works well with the typical range of moving subjects. 135 6 The Shooting Menus The focus system attempts to track the chosen SET 2 IGNORE subject.
STORE AF MODE BY ORIENTATION Choose whether the focus mode and focus area used when the camera is in portrait orientation are stored separately from those used when the camera is in landscape orientation. Option OFF Description The same settings are used in both orientations. The focus area for each orientation can be selectFOCUS AREA ONLY ed separately. The focus mode and focus area can be selected ON separately.
AF/MF SETTING NUMBER OF FOCUS POINTS Choose the number of focus points available for focus-point selection in manual focus mode or when SINGLE POINT is selected for AF MODE. Option 91 POINTS (7 × 13) 325 POINTS (13 × 25) Description Choose from 91 focus points arranged in a 7- by 13-point grid. Choose from 325 focus points arranged in a 13- by 25-point grid. The Shooting Menus 6 PRE-AF If ON is selected, the camera will continue to adjust focus even when the shutter button is not pressed halfway.
AF ILLUMINATOR If ON is selected, the AF-assist illuminator will light to assist autofocus. Options ON OFF O The camera may be unable to focus using the AF-assist illuminator in some cases. If the camera is unable to focus, try increasing the distance to the subject. Avoid shining the AF-assist illuminator directly into your subject’s eyes.
AF/MF SETTING Option FACE ON/EYE OFF FACE ON/ EYE AUTO FACE ON/RIGHT EYE PRIORITY FACE ON/LEFT EYE PRIORITY FACE OFF/EYE OFF Description Intelligent Face Detection only. The camera automatically chooses which eye to focus on when a face is detected. The camera focuses on the right eye of subjects detected using Intelligent Face Detection. The camera focuses on the left eye of subjects detected using Intelligent Face Detection. Intelligent Face Detection and eye priority off.
O In some modes, the camera may set exposure for the frame as a whole rather than the portrait subject. If the subject moves as the shutter button is pressed, the face may not be in the area indicated by the green border when the picture is taken. N If the camera is unable to detect the subject’s eyes because they are hidden by hair, glasses, or other objects, the camera will instead focus on faces. Face/eye detection options can also be accessed via shortcuts (P 246).
AF/MF SETTING AF+MF If ON is selected in focus mode S, focus can be adjusted manually by rotating the focus ring while the shutter button is pressed halfway. Both standard and focus peaking MF assist options are supported. Options ON OFF O Lenses with a focus distance indicator must be set to manual focus mode (MF) before this option can be used. Selecting MF disables the focus distance indicator.
MF ASSIST Choose how focus is displayed in manual focus mode. Option STANDARD DIGITAL SPLIT IMAGE FOCUS PEAK HIGHLIGHT 6 Description Focus is displayed normally (focus peaking and digital split image are not available). Displays a black-and-white (MONOCHROME) or color (COLOR) split image in the center of the frame. Frame the subject in the split-image area and rotate the focus ring until the three parts of the split image are correctly aligned. The camera heightens high-contrast outlines.
AF/MF SETTING FOCUS CHECK If ON is selected, the display will automatically zoom in on the selected focus area when the focus ring is rotated in manual focus mode. Options ON OFF O Pressing the center of the rear command dial cancels focus zoom. The Shooting Menus 6 INTERLOCK SPOT AE & FOCUS AREA Select ON to meter the current focus frame when SINGLE POINT is selected for AF MODE and SPOT is selected for PHOTOMETRY.
INSTANT AF SETTING Choose whether the camera focuses using single AF (AF-S) or continuous AF (AF-C) when the AF-L button is pressed in manual focus mode. Options AF-S AF-C 6 DEPTH-OF-FIELD SCALE The Shooting Menus Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed as prints and the like, PIXEL BASIS to help you assess depth of field for pictures that will be viewed at high resolutions on computers or other electronic displays.
AF/MF SETTING RELEASE/FOCUS PRIORITY Choose how the camera focuses in focus mode AF-S or AF-C. Option RELEASE FOCUS Description Shutter response is prioritized over focus. Pictures can be taken when the camera is not in focus. Focus is prioritized over shutter response. Pictures can be only taken when the camera is in focus.
TOUCH SCREEN MODE Choose the shooting operations performed using touch controls. Still Photography Mode TOUCH SHOOTING AF 6 Description Tap your subject in the display to focus and release the shutter. In burst mode, pictures will be taken while you keep your finger on the display. The Shooting Menus Tap to select a focus point. In focus mode S (AF-S), focus will lock, while in focus mode C (AF-C), the camera will continually adjust focus in response to changes in the distance to the subject.
AF/MF SETTING Movie Recording N We recommend that you select AREA for MOVIE AF MODE in the shooting menu B (movie) tab before recording movies using touch controls (in some movie modes, AREA will be selected automatically). Mode 147 6 The Shooting Menus Description Tap your subject in the display to focus and start recording.
AF/MF SETTING Mode AREA OFF Description Tap to select a focus point and press the shutter button to start or end recording. In focus mode C (AF-C), the camera will continually adjust focus in response to changes in the distance to the subject in the selected focus point. In focus mode S (AF-S), you can move the focus point by tapping the display, but can only refocus using the control to which AF-ON has been assigned (P 227). Touch controls off. The display does not respond when tapped.
A SHOOTING SETTING Adjust shooting options. To display shooting options, press MENU/OK in the shooting display and select the A (SHOOTING SETTING) tab. SHOOTING SETTING SCENE POSITION SELF-TIMER INTERVAL TIMER SHOOTING AE BKT SETTING FILM SIMULATION BKT PHOTOMETRY SHUTTER TYPE IS MODE EXIT N The options available vary with the shooting mode selected. SCENE POSITION Choose the mode selected when the drive dial is rotated to S and the auto mode selector lever is rotated 6 to AUTO.
Mode H NIGHT (TRIPOD) p FIREWORKS 6 The Shooting Menus Description Choose this mode for slow shutter speeds when shooting at night. Slow shutter speeds are used to capture the expanding burst of light from a firework. Q SUNSET Choose this mode to record the vivid colors in sunrises and sunsets. R SNOW Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white snow. s BEACH Choose for crisp, clear shots that capture the brightness of sunlit beaches.
SHOOTING SETTING SELF-TIMER Choose a shutter release delay. Option Description The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera R 2 SEC moving when the shutter button is pressed. The self-timer lamp blinks as the timer counts down. The shutter is released ten seconds after the shutter button is pressed. Use for photographs in which you wish to S 10 SEC appear yourself. The self-timer lamp blinks immediately before the picture is taken.
INTERVAL TIMER SHOOTING Configure the camera to take photos automatically at a preset interval. 1 Highlight INTERVAL TIMER SHOOTING in the A (SHOOTING SETTING) tab and press MENU/OK. 2 Use the focus stick (focus lever) to choose the interval and number of shots. Press MENU/OK to proceed. INTERVAL/NUMBER OF TIMES INTERVAL NUMBER OF TIMES END 6 3 The Shooting Menus Use the focus stick to choose the starting time and then press MENU/OK. Shooting will start automatically.
SHOOTING SETTING O Interval timer photography cannot be used at a shutter speed of B (bulb) or with multiple exposure photography. In burst mode, only one picture will be taken each time the shutter is released. N Use of a tripod is recommended. Check the battery level before starting. We recommend using an optional AC-9V AC power adapter and CP-W126 DC coupler. The display sometimes turns off between shots and lights a few seconds before the next shot is taken.
AE BKT SETTING Adjust exposure bracketing settings. Option Description Choose the number of shots in the bracketing FRAMES/ sequence (FRAMES) and the amount exposure is STEP SETTING varied with each shot (STEP). Choose whether the shots in the bracketing se1 FRAME/ quence are taken one at a time (1 FRAME) or in CONTINUOUS a single burst (CONTINUOUS). SEQUENCE SETTING Choose the order in which the shots are taken.
SHOOTING SETTING PHOTOMETRY Choose how the camera meters exposure. O The selected option will only take effect when G AF/MF SETTING > FACE/EYE DETECTION SETTING is FACE OFF/EYE OFF. Mode Description The camera instantly determines exposure based on an o analysis of composition, color, and brightness distribu(multi) tion. Recommended in most situations. 155 6 The Shooting Menus p The camera meters the entire frame but assigns the (centergreatest weight to the area at the center.
SHUTTER TYPE Choose the shutter type. Choose the electronic shutter to mute the shutter sound. Option t MECHANICAL SHUTTER s ELECTRONIC SHUTTER t MECHANICAL + s ELECTRONIC Description Take pictures with the mechanical shutter. Take pictures with the electronic shutter. The camera chooses the shutter type according to shooting conditions.
SHOOTING SETTING IS MODE Choose from the following image stabilization options: N + MOTION has no effect when sensitivity is set to a fixed value, and may also be unavailable at some other combinations of settings. The effect may vary with lighting conditions and the speed at which the object is moving. This option is available only with lenses that support image stabilization. 157 6 The Shooting Menus Option Description L CONTINUOUS Image stabilization on.
ISO Adjust the camera’s sensitivity to light. Option Description Sensitivity is automatically adjusted in response AUTO1 to shooting conditions. Choose the base sensiAUTO2 tivity, maximum sensitivity, and minimum shutter AUTO3 speed for AUTO1, AUTO2, and AUTO3. Adjust sensitivity manually. Selected value is 12800–200 shown in display. Choose for special situations. Note that mottling H (25600/51200), may appear in pictures taken at H, while L reducL (100/125/160) es dynamic range.
SHOOTING SETTING AUTO Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for AUTO1, AUTO2, and AUTO3. Defaults are shown below. Item Options DEFAULT SENSITIVITY 12800–200 MAX. SENSITIVITY 12800–400 MIN.
N If the value selected for DEFAULT SENSITIVITY is high- er than that selected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to the value selected for MAX. SENSITIVITY. 6 The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underexposed at the value selected for MAX. SENSITIVITY. If AUTO is selected for MIN.
SHOOTING SETTING MOUNT ADAPTOR SETTING Adjust settings for M-mount lenses connected using an optional FUJIFILM M MOUNT ADAPTER. Choosing a Focal Length If the lens has a focal length of 21, 24, 28, or 35 mm, choose a matching option in the MOUNT ADAPTOR SETTING menu. For other lenses, select LENS 5 or LENS 6 and use the focus stick (focus lever) to enter the focal length.
Distortion Correction Choose from STRONG, MEDIUM, or WEAK options to correct BARREL or PINCUSHION distortion. Color Shading Correction Color (shading) variations between the center and edges of the frame can be adjusted separately for each corner. LENS5 DISTORTION CORRECTION BARREL STRONG BARREL MEDIUM BARREL WEAK OFF PINCUSHION WEAK PINCUSHION MEDIUM PINCUSHION STRONG NEXT SET To use color shading correction, follow the steps below.
SHOOTING SETTING Peripheral Illumination Correction Choose from values between –5 and +5. Choosing positive values increases peripheral illumination, while choosing negative values reduces peripheral illumination. Positive values are recommended for vintage lenses, negative values to create the effect of images taken with an antique lens or a pinhole camera.
F FLASH SETTING Adjust flash-related settings. To display flash-related settings, press MENU/OK in the shooting display and select the F (FLASH SETTING) tab. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING EXIT N The options available vary with the shooting mode selected. 6 FLASH FUNCTION SETTING The Shooting Menus Choose a flash control mode, flash mode, or sync mode or adjust the flash level. The options available vary with the flash.
FLASH SETTING RED EYE REMOVAL Remove red-eye effects caused by the flash. Option Description A red-eye reduction pre-flash is combined with FLASH + REMOVAL digital red-eye removal. FLASH Flash red-eye reduction only. REMOVAL Digital red-eye removal only. Flash red-eye reduction and digital red-eye reOFF moval off. N Flash red-eye reduction can be used in TTL flash control mode. Digital red-eye removal is performed only when a face is detected and is not available with RAW images.
TTL-LOCK MODE Instead of adjusting flash level with each shot, TTL flash control can be locked for consistent results across a series of photographs. Option Description Flash output is locked at the value metered for LOCK WITH LAST the most recent photo. An error message will be FLASH displayed if no previously metered value exists. LOCK WITH The camera emits a series of pre-flashes and METERING FLASH locks flash output at the metered value.
FLASH SETTING LED LIGHT SETTING Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos. Option CATCHLIGHT AF ASSIST AF ASSIST + CATCHLIGHT OFF Role of LED video light in still photography Catchlight AF-assist illuminator AF-assist illuminator and catchlight None N This option can also be accessed via the flash settings menu.
FLASH SETTING CH SETTING Choose the channel used for communication between the master flash and remote flash units when using FUJIFILM optical wireless flash control. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity.
B MOVIE SETTING Adjust movie-recording options. To display options for movie recording, press MENU/OK in the shooting display and select the B (MOVIE SETTING) tab. MOVIE SETTING MOVIE MODE MOVIE AF MODE HDMI OUTPUT INFO DISPLAY 4K MOVIE OUTPUT HDMI REC CONTROL MIC LEVEL ADJUSTMENT MIC/REMOTE RELEASE EXIT N The options available vary with the shooting mode selected. MOVIE MODE Choose a frame size and rate for movie recording. Frame size 3840 × 2160 (4K) 1920 × 1080 (Full HD) 1280 × 720 (HD) Rate 29.
MOVIE AF MODE Choose how the camera selects the focus point for movie recording. Option Description MULTI Automatic focus-point selection. AREA The camera focuses on the subject in the selected focus area. 6 HDMI OUTPUT INFO DISPLAY The Shooting Menus If ON is selected, HDMI devices to which the camera is connected will mirror the information in the camera display.
MOVIE SETTING 4K MOVIE OUTPUT Choose the destination for 4K movies shot while the camera is connected to an HDMI recorder or other device that supports 4K. Option Description 4K movies are recorded to a camera memory card in 4K b CARD and output to the HDMI device in Full HD. 4K movies are output to the HDMI device in 4K, starting HDMI when the shutter button is pressed. The camera does not record 4K movies to a memory card.
MOVIE SETTING MIC LEVEL ADJUSTMENT Adjust the recording level for the built-in and external microphones. MIC LEVEL ADJUSTMENT SET CANCEL Option Description 4—1 Choose a recording level. N Displays shows the peak recording level detected in a given period. 6 You can assign MIC LEVEL ADJUSTMENT to a camera control and then using the control to adjust the microphone level during recording.
Playback and the Playback Menu 173
The Playback Display This section lists the indicators that may be displayed during playback. Playback and the Playback Menu O For illustrative purposes, displays are shown with all indicators lit.
The Playback Display upload .........................................192 G Frame number ............................237 H Protected image .........................188 I Location data ............................. 243 J Red-eye removal indicator ..............................................165, 190 K Advanced filter .............................. 99 L Gift image....................................... 51 M Photobook assist indicator......194 N Battery level ...................................
The DISP/BACK Button The DISP/BACK button controls the display of indicators during playback. Playback and the Playback Menu Standard Information off 12/31/2050 10:00 AM 3.2 +21/3 7 FAVORITES Favorites Info display Favorites: Rating Pictures To rate the current picture, press DISP/BACK and press the focus stick (focus lever) up and down to select from zero to five stars.
The Playback Display Viewing Photo Information The photo information display changes each time the focus stick (focus lever) is pressed up. Basic data Playback and the Playback Menu 12/31/2050 10:00 AM 3.2 S.S 1/2000 F 3.2 ISO 51200 +21/3 +21/3 NEXT Info display 2 Info display 1 Zooming in on the Focus Point Press the center of the rear command dial to zoom in on the focus point. Press again to return to full-frame playback.
Viewing Pictures Read this section for information on playback zoom and multi-frame playback. Playback and the Playback Menu Use the rear command dial to go from full-frame playback to playback zoom or multi-frame playback.
Viewing Pictures N The maximum zoom ratio varies with the option select- ed for H IMAGE QUALITY SETTING > IMAGE SIZE. Playback zoom is not available with cropped or resized copies saved at a size of a. Scroll When the picture is zoomed in, the focus stick (focus lever) can be used to view areas of the image not currently visible in the display. Navigation window Multi-Frame Playback To change the number of images displayed, rotate the rear command dial left when a picture is displayed full frame.
C The Playback Menu Adjust playback settings. Playback and the Playback Menu The playback menu is displayed when you press MENU/OK in playback mode. PLAY BACK MENU RAW CONVERSION ERASE CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVA VOICE MEMO SETTING EXIT RAW CONVERSION RAW pictures store information on camera settings separately from the data captured by the camera image sensor.
The Playback Menu 2 In the playback menu, highlight RAW CONVERSION and press MENU/OK to display settings. RAW CONVERSION REFLECT SHOOTING COND. PUSH/PULL PROCESSING DYNAMIC RANGE FILM SIMULATION GRAIN EFFECT WHITE BALANCE CREATE CANCEL Q button during playback. 3 Highlight a setting and press the focus stick (focus lever) right to display options. Press WB the focus stick up or down to highlight the desired option and press MENU/OK to select and return to the settings list.
The settings that can be adjusted when converting pictures from RAW to JPEG are: Playback and the Playback Menu 7 Setting Description REFLECT Create a JPEG copy using the settings in effect at SHOOTING COND. the time the photo was taken. PUSH/PULL Adjust exposure. PROCESSING Enhance details in highlights for natural conDYNAMIC RANGE trast. FILM SIMULATION Simulate the effects of different types of film. GRAIN EFFECT Add a film grain effect. WHITE BALANCE Adjust white balance. WB SHIFT Fine-tune white balance.
The Playback Menu ERASE Delete individual pictures, multiple selected pictures, or all pictures. Protect important pictures or copy them to a computer or other storage device before proceeding. Option Description FRAME Delete pictures one at a time. SELECTED FRAMES Delete multiple selected pictures. ALL FRAMES Delete all unprotected pictures. FRAME 1 Select FRAME for ERASE in the playback menu. 2 Playback and the Playback Menu O Deleted pictures cannot be recovered.
SELECTED FRAMES 1 Select SELECTED FRAMES for ERASE in the playback menu. Playback and the Playback Menu 2 Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks or printer orders are shown by S). Selected pictures are indicated by check marks (R). 3 When the operation is complete, press DISP/BACK to display a confirmation dialog. 4 Highlight OK and press MENU/OK to delete the selected pictures.
The Playback Menu ALL FRAMES 1 Select ALL FRAMES for ERASE in the playback menu. A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures. N Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed cannot be recovered. If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the pictures.
CROP Create a cropped copy of the current picture. Playback and the Playback Menu 7 1 2 3 Display the desired picture. 4 5 Press MENU/OK to display a confirmation dialog. Select CROP in the playback menu. Use the rear command dial to zoom in and out and press the focus stick (focus lever) up, down, left, or right to scroll the picture until the desired portion is displayed. Press MENU/OK again to save the cropped copy to a separate file.
The Playback Menu RESIZE Create a small copy of the current picture. 4 Display the desired picture. Select RESIZE in the playback menu. Highlight a size and press MENU/OK to display a confirmation dialog. Press MENU/OK again to save the resized copy to a separate file. N The sizes available vary with the size of the original image.
Playback and the Playback Menu PROTECT Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK. • FRAME: Protect selected pictures. Press the focus stick (focus lever) left or right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete. • SET ALL: Protect all pictures. • RESET ALL: Remove protection from all pictures. O Protected pictures will be deleted when the memory card is formatted.
The Playback Menu IMAGE ROTATE Rotate pictures. Display the desired picture. 4 Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera. Select IMAGE ROTATE in the playback menu. Press the focus stick (focus lever) down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise. N Protected pictures cannot be rotated. Remove protection before rotating pictures.
RED EYE REMOVAL Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye. Playback and the Playback Menu 7 1 2 3 Display the desired picture. Select RED EYE REMOVAL in the playback menu. Press MENU/OK. N Results vary depending on the scene and the camera’s success in detecting faces.
The Playback Menu VOICE MEMO SETTING Add a voice memo to the current photograph. Select ON for VOICE MEMO SETTING in the playback menu. 2 Display a photo to which you wish to add a voice memo. 3 Press and hold the center of the front command dial to record the memo. Recording ends after 30 s or when you release the dial. N The new memo will be recorded over any existing memos. Deleting the picture also deletes the memo. Voice memos cannot be added to movies or protected pictures.
IMAGE TRANSFER ORDER Select photos for upload to a paired smartphone or tablet. Playback and the Playback Menu 1 Select IMAGE TRANSFER ORDER in the playback menu. 2 Highlight photos and press MENU/OK to select or deselect. Repeat until all the desired photos have been selected. 3 Press MENU/OK to exit to playback. N If ON is selected for D CONNECTION SETTING > Bluetooth SETTINGS > AUTO IMAGE TRANSFER, upload will begin shortly after you exit to playback or turn the camera off.
The Playback Menu N For downloads and other information, visit: http://app.fujifilm-dsc.com/en/camera_remote/ Playback and the Playback Menu WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can be used to browse the images on the camera, download selected images, control the camera remotely, or upload location data to the camera. SLIDE SHOW View pictures in an automated slide show.
PHOTOBOOK ASSIST Create books from your favorite photos. Playback and the Playback Menu Creating a Photobook 1 Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK ASSIST. 2 Scroll through the images and press the focus stick (focus lever) up to select or deselect. Press MENU/OK to exit when the book is complete. N Neither photographs a or smaller nor movies can be selected for photobooks. The first picture selected becomes the cover image.
The Playback Menu Editing and Deleting Photobooks Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the on-screen instructions. • EDIT: Edit the book as described in “Creating a Photobook”. • ERASE: Delete the book. Playback and the Playback Menu Viewing Photobooks Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the focus stick (focus lever) left or right to scroll through the pictures.
Playback and the Playback Menu PC AUTO SAVE Upload pictures from the camera to a computer running the latest version of FUJIFILM PC AutoSave (note that you must first install the software and configure the computer as a destination for images copied from the camera). N For downloads and other information, visit: http://app.fujifilm-dsc.
The Playback Menu PRINT ORDER (DPOF) Create a digital “print order” for DPOF-compatible printers. Select C PLAY BACK MENU > PRINT ORDER (DPOF). 2 Select WITH DATE s to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding. 3 Display a picture you wish to include in or remove from the print order. 4 Press the focus stick (focus lever) up or down to choose the number of copies (up to 99).
N The pictures in the current print order are indicated by a u icon during playback. Print orders can contain a maximum of 999 pictures. Playback and the Playback Menu If a memory card is inserted containing a print order created by another camera, you will need to delete the order before creating as described above.
The Playback Menu 1 2 Turn the printer on. Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. PRINTER PRINT instax-12345678 CONNECTING TO PRINTER FUJIFILM-CAMERA-1234 CANCEL N To print a frame from a burst sequence, display the frame before selecting instax PRINTER PRINT. 3 Use the focus stick (focus lever) to display the picture you want to print, then press MENU/OK. The picture will be sent to the printer and printing will start.
The Playback Menu Playback and the Playback Menu 7 DISP ASPECT Choose how High Definition (HD) devices display pictures with an aspect ratio of 3∶2 (this option is available only when an HDMI cable is connected). Select 16∶9 to display the image so that it fills the screen with its top and bottom cropped out, 3∶2 to display the entire image with black bands at either side.
The Setup Menus 201
D USER SETTING Adjust basic camera settings. To access basic camera settings, press MENU/OK, select the D (SET UP) tab, and choose USER SETTING.
USER SETTING FORMAT To format a memory card: 1 Select D USER SETTING > FORMAT in the D (SET UP) tab. 2 A confirmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK. To exit without formatting the memory card, select CANCEL or press DISP/BACK. FORMAT FORMAT OK? ERASE ALL DATA OK CANCEL ed from the memory card. Be sure important files have been copied to a computer or other storage device. Do not open the battery-chamber cover during formatting.
DATE/TIME To set the camera clock: The Setup Menus 1 Select D USER SETTING > DATE/TIME in the D (SET UP) tab. 2 Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the focus stick up or down. 3 Press MENU/OK to set the clock.
USER SETTING TIME DIFFERENCE Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the difference between your local and home time zone: 1 2 Highlight g LOCAL and press MENU/OK. To set the camera clock to local time, highlight g LOCAL and press MENU/OK. To set the clock to the time in your home time zone, select h HOME. If g LOCAL is selected, g will be displayed in yellow for about three seconds when the camera is turned on.
a Choose a language. The Setup Menus 8 MY MENU SETTING Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used options. 1 Highlight D USER SETTING > MY MENU SETTING in the D (SET UP) tab and press MENU/OK to display the options at right.
USER SETTING 2 Press the focus stick (focus lever) up or down to highlight ADD ITEMS and press MENU/OK. Options that can be added to “my menu” are highlighted in blue. MY MENU SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE SELECT CANCEL N Items currently in “my menu” are indicated by check marks. 3 Highlight an item and press MENU/OK to add it to “my menu”.
SENSOR CLEANING Remove dust from the camera image sensor. • OK: Clean the sensor immediately. • WHEN SWITCHED ON: Sensor cleaning will be performed when the camera is turned on. • WHEN SWITCHED OFF: Sensor cleaning will be performed when the camera turns off (sensor cleaning is not however performed if the camera turns off in playback mode). The Setup Menus N Dust that cannot be removed using sensor cleaning can be removed manually.
USER SETTING RESET Reset shooting or setup menu options to default values. Custom white balance, custom settings banks created using EDIT/SAVE CUSTOM SETTING, WIRELESS SETTINGS, and the setup menu DATE/ TIME and TIME DIFFERENCE options are not affected. 1 2 Highlight the desired option and press MENU/OK. A confirmation dialog will be displayed; highlight OK and press MENU/OK.
D SOUND SETTING Make changes to camera sounds. To access sound settings, press MENU/OK, select the D (SET UP) tab, and choose SOUND SET-UP. SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME The Setup Menus AF BEEP VOL. Choose the volume of the beep that sounds when the camera focuses. The beep can be muted by se8 lecting eOFF.
SOUND SETTING SELF-TIMER BEEP VOL. Choose the volume of the beep that sounds while the self-timer is active. The beep can be muted by selecting eOFF. b (high) Options c (medium) d (low) eOFF (mute) The Setup Menus OPERATION VOL. Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF to dis8 able control sounds.
SHUTTER VOLUME Adjust the volume of the sounds produced by the electronic shutter. Choose eOFF to disable the shutter sound. b (high) The Setup Menus 8 Options c (medium) d (low) eOFF (mute) SHUTTER SOUND Choose the sound made by the electronic shutter.
SOUND SETTING PLAYBACK VOLUME Adjust the volume for movie playback. Choose from 10 options between 10 (high) and 1 (low) or select 0 to mute audio during movie playback.
D SCREEN SETTING Make changes to display settings. To access display settings, press MENU/OK, select the D (SET UP) tab, and choose SCREEN SET-UP. SCREEN SETTING EVF BRIGHTNESS EVF COLOR LCD BRIGHTNESS LCD COLOR IMAGE DISP. AUTOROTATE DISPLAYS PREVIEW EXP./WB IN MANUAL MODE PREVIEW PIC. EFFECT The Setup Menus EVF BRIGHTNESS Adjust the brightness of the display in the electronic viewfinder.
SCREEN SETTING EVF COLOR Adjust the hue of the display in the electronic viewfinder. Choose from 11 options between +5 and −5. +5 +4 +3 +2 +1 Options 0 −1 −2 −3 −4 −5 +5 +4 +3 +2 Options +1 0 −1 −2 −3 −4 −5 215 The Setup Menus LCD BRIGHTNESS Adjust monitor brightness. Choose from 11 options between +5 and −5.
LCD COLOR Adjust monitor hue. Choose from 11 options between +5 and −5. +5 +4 +3 +2 +1 Options 0 −1 −2 −3 −4 −5 The Setup Menus IMAGE DISP. Choose how long images are displayed after shooting. Colors may differ slightly from those in the final image and “noise” mottling may be visible at high sensitivities. 8 Option Description Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway.
SCREEN SETTING AUTOROTATE DISPLAYS Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation. Options ON OFF The Setup Menus PREVIEW EXP./WB IN MANUAL MODE Select PREVIEW EXP.
PREVIEW PIC. EFFECT Choose ON to preview the effects of film simulation, white balance, and other settings in the monitor, OFF to make shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible. Options ON OFF N If OFF is selected, the effects of camera settings will not The Setup Menus be visible in the monitor and colors and tone will differ from those in the final picture.
SCREEN SETTING FRAMING GUIDELINE Choose a framing grid for shooting mode. Option G GRID 24 F GRID 9 Display P P P For “rule of thirds” composition. H HD FRAMING A six-by-four grid. N Framing guides are not shown at default settings but can be displayed using D SCREEN SET-UP > DISP. CUSTOM SETTING (P 221). The Setup Menus Frame HD pictures in the crop shown by the lines at the top and bottom of the display.
AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback. Options ON The Setup Menus 8 OFF FOCUS SCALE UNITS Choose the units used for the focus distance indicator.
SCREEN SETTING DISP. CUSTOM SETTING Choose the items shown in the standard display. 1 In shooting mode, use the DISP/BACK button to display standard indicators. 2 Press MENU/OK and select D SCREEN SET-UP > DISP. CUSTOM SETTING in the D (SET UP) tab. 3 Highlight items and press MENU/OK to select or deselect. Item SHUTTER TYPE FLASH CONTINUOUS MODE DUAL IS MODE TOUCH SCREEN MODE WHITE BALANCE FILM SIMULATION DYNAMIC RANGE FRAMES REMAINING IMAGE SIZE/QUALITY MOVIE MODE & REC.
SCREEN SETTING 4 5 Press DISP/BACK to save changes. Press DISP/BACK as needed to exit the menus and return to the shooting display. N Some indicators are not displayed in all modes.
D BUTTON/DIAL SETTING Access options for camera controls. To access control options, press MENU/OK, select the D (SET UP) tab, and choose BUTTON/DIAL SETTING. BUTTON/DIAL SETTING FOCUS LEVER SETTING EDIT/SAVE QUICK MENU FUNCTION (Fn) SETTING COMMAND DIAL SETTING S.S. OPERATION ISO COMMAND DIAL SETTING SHUTTER AF SHUTTER AE Option Description LOCK (OFF) The focus stick cannot be used during shooting.
EDIT/SAVE QUICK MENU Choose the items displayed in the quick menu. The Setup Menus 8 1 Select D BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU in the D (SET UP) tab. 2 The current quick menu will be displayed; use the focus stick (focus lever) to highlight the item you wish to change and press MENU/OK. 3 Highlight any of the following options and press MENU/OK to assign it to the selected position.
BUTTON/DIAL SETTING N 4 Select NONE to assign no option to the selected position. When SELECT CUSTOM SETTING is selected, current settings are shown in the quick menu by the label BASE. Highlight the desired item and press MENU/OK to assign it to the selected position. N The quick menu can also be accessed in shooting mode by holding the Q button.
FUNCTION (Fn) SETTING Choose the roles played by the function buttons. The Setup Menus 8 1 Select D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING in the D (SET UP) tab. 2 3 Highlight the desired control and press MENU/OK. Highlight any of the following options and press MENU/OK to assign it to the selected control.
BUTTON/DIAL SETTING N Function button assignment options can also be accessed by holding the DISP/BACK button. AE LOCK ONLY, AF LOCK ONLY, AE/AF LOCK, and AF-ON cannot be assigned to the touch function buttons (T-Fn1 through T-Fn4). AF-ON If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway.
COMMAND DIAL SETTING Choose the roles played by the command dials. Option Description The front command dial controls aperture, the rear Y F X S.S. command dial shutter speed. The front command dial controls shutter speed, the Y S.S. X F rear command dial aperture. The Setup Menus 8 o S.S. OPERATION Select OFF to disable shutter-speed fine-tuning using the command dials.
BUTTON/DIAL SETTING ISO COMMAND DIAL SETTING Select ON to allow sensitivity to be adjusted using the front command dial. Options ON OFF N The sensitivity selected with the command dial is reflected in the setting chosen for A SHOOTING SETTING > ISO. Option AF-S AF-C Description • ON: Focus locks when the shutter button is pressed halfway. • OFF: No focus operation is performed when the shutter button is pressed halfway. • ON: The camera focuses while the shutter button is pressed halfway.
SHUTTER AE If ON is selected, exposure will lock while the shutter button is pressed halfway. Option Description Exposure locks when the shutter button is pressed halfway. • OFF: Exposure does not lock when the shutter button is pressed halfway. • ON: Exposure locks while the shutter button is pressed halfway. • OFF: Exposure does not lock when the shutter button is pressed halfway.
BUTTON/DIAL SETTING SHOOT WITHOUT CARD Choose whether the shutter can be released without a memory card inserted in the camera. Option ON OFF Description When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed. The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card.
AE/AF-LOCK MODE If AE & AF ON WHEN PRESSING is selected, exposure and/or focus will lock while the AE-L or AF-L button is pressed. If AE & AF ON/OFF SWITCH is selected, exposure and/or focus will lock when the AE-L or AF-L button is pressed and remain locked until the button is pressed again. Options AE & AF ON WHEN PRESSING The Setup Menus 8 AE & AF ON/OFF SWITCH APERTURE SETTING Choose the method used to adjust aperture when using lenses with no aperture rings.
BUTTON/DIAL SETTING TOUCH SCREEN SETTING Enable or disable touch-screen controls. Option Description • ON: Touch controls enabled; the LCD monitor The Setup Menus TOUCH SCREEN functions as a touch screen. ON/OFF • OFF: Touch controls disabled; the LCD monitor cannot be used as a touch screen. Select the area of the LCD monitor (ALL, RIGHT, or EVF TOUCH LEFT) used for touch controls while the viewfinder SCREEN AREA is active, or choose OFF to disable touch controls SETTINGS while the viewfinder is in use.
D POWER MANAGEMENT Adjust power management settings. To access power management settings, press MENU/OK, select the D (SET UP) tab, and choose POWER MANAGEMENT. POWER MANAGEMENT AUTO POWER OFF PERFORMANCE The Setup Menus AUTO POWER OFF Choose the length of time before the camera turns off automatically when no operations are performed. 8 Shorter times increase battery life; if OFF is selected, the camera must be turned off manually.
POWER MANAGEMENT PERFORMANCE Adjust power management settings. Option HIGH PERFORMANCE STANDARD AF performance LCD/EVF display (speed) quality Battery endurance Fast Very high Low Normal High Normal N When STANDARD is selected, the frame rate will drop when no operations are being performed. Operating camera controls returns the frame rate to normal.
D SAVE DATA SETTING Make changes to file management settings. To access file management settings, press MENU/OK, select the D (SET UP) tab, and choose SAVE DATA SET-UP. The Setup Menus 8 236 SAVE DATA SETTING FRAME NO.
SAVE DATA SETTING FRAME NO. Frame number New pictures are stored in image files named using a four-digit file number assigned by adding one File to the last file number used. The Directory number number file number is displayed during playback as shown. FRAME NO. controls whether file numbering is reset to 0001 when a new memory card is inserted or the current memory card is formatted. Option N If the frame number reaches 999-9999, the shutter re- lease will be disabled.
SAVE ORG IMAGE Choose ON to save unprocessed copies of pictures taken using RED EYE REMOVAL. Options ON OFF The Setup Menus EDIT FILE NAME Change the file name prefix. sRGB images use a four-letter prefix (default “DSCF”), Adobe RGB images 8 a three-letter prefix (“DSF”) preceded by an underscore.
SAVE DATA SETTING COPYRIGHT INFO Copyright information, in the form of Exif tags, can be added to new images as they are taken. Changes to copyright information are reflected only in images taken after the changes are made. The Setup Menus Option Description DISP COPYRIGHT View the current copyright information. INFO ENTER AUTHOR'S Enter the creator’s name. INFO ENTER COPYRIGHT Enter the name of the copyright holder. INFO Delete the current copyright information.
D CONNECTION SETTING Adjust settings for connection to other devices. To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING. CONNECTION SETTING Bluetooth SETTINGS PC AUTO SAVE SETTINGS PRINTER CONNECTION SETTING GENERAL SETTINGS INFORMATION RESET WIRELESS SETTING N For more information on wireless connections, visit: http://fujifilm-dsc.
CONNECTION SETTING Bluetooth SETTINGS Adjust Bluetooth settings. Option N Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images. When ON is selected for both Bluetooth ON/OFF and AUTO IMAGE TRANSFER, upload to paired devices will begin shortly after you exit to playback or turn the camera off.
PC AUTO SAVE SETTINGS Adjust settings for connection to computers via wireless LAN. Option PC AUTO SAVE SETTING The Setup Menus Description Choose the method used for connection to computers via a wireless LAN. • SIMPLE SETUP: Connect using WPS. • MANUAL SETUP: Choose the network from a list (SELECT FROM NETWORK LIST) or enter the name manually (ENTER SSID). DELETE REGISTERED Remove selected destinations.
CONNECTION SETTING GENERAL SETTINGS Adjust settings for connection to wireless networks. Option The Setup Menus Description Choose a name (NAME) to identify the camera NAME on the wireless network (the camera is assigned a unique name by default). Choose ON (the default setting, recommended in most circumstances) to resize larger images to H RESIZE IMAGE FOR for upload to smartphones, OFF to upload images SMARTPHONE at their original size.
CONNECTION SETTING INFORMATION View the camera’s MAC and Bluetooth address. The Setup Menus RESET WIRELESS SETTING Restore wireless settings to their default values.
Shortcuts 245
Shortcut Options Customize camera controls to suit your style or situation. Shortcuts Frequently-used options can be added to the Q menu or a custom “my” menu or assigned to an Fn (function) button for direct access: • The Q menu (P 247): The Q menu is displayed by pressing the Q button. Use the Q menu to view or change the options selected for frequently-used menu items.
The Q (Quick Menu) Button Press Q for quick access to selected options.
The quick menu shows the options currently selected for items B–P, which can be changed as described on page 250. SELECT CUSTOM SETTING The H IMAGE QUALITY SETTING > SELECT CUSTOM SETTING item (item A) shows the current custom settings bank: • q: No custom settings bank selected. • t–u: Select a bank to view the settings saved using the H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM SETTING option. • r–s: The current custom settings bank.
The Q (Quick Menu) Button Viewing and Changing Settings 1 Press Q to display the quick menu during shooting. 2 Use the focus stick (focus lever) to highlight items and rotate the rear command dial to change. SELECT CUSTOM SETTING BASE SET N Changes are not saved to the 3 Shortcuts current settings bank. Settings that differ from those in the current settings bank (t– u) are shown in red. Press Q to exit when settings are complete.
Editing the Quick Menu To choose the items displayed in the quick menu: 1 Press and hold the Q button during shooting. 2 The current quick menu will be displayed; use the focus stick (focus lever) to highlight the item you wish to change and press MENU/OK.
The Q (Quick Menu) Button 3 Highlight any of the following options and press MENU/OK to assign it to the selected position. * * * * * * * * * * * Stored in custom settings bank. • FACE/EYE DETECTION SETTING • MF ASSIST • TOUCH SCREEN MODE • SELF-TIMER • PHOTOMETRY • SHUTTER TYPE • ISO • FLASH FUNCTION SETTING • FLASH COMPENSATION • MOVIE MODE • MIC LEVEL ADJUSTMENT • EVF/LCD BRIGHTNESS • EVF/LCD COLOR • NONE N Select NONE to assign no option to the select- ed position.
The Fn (Function) Buttons The roles played by each of the function buttons can be selected by pressing and holding the button. N The functions assigned to T-Fn1 through T-Fn4 can be accessed by flicking the monitor.
The Fn (Function) Buttons T-Fn4 (flick down) AE-L button Sensitivity Exposure lock AF-L button Center of rear command dial Focus lock Focus check Shortcuts 9 253
Assigning Roles to the Function Buttons To assign roles to the buttons: Shortcuts 9 1 Press and hold the DISP/BACK button until a button selection menu is displayed. 2 3 Highlight a button and press MENU/OK. Highlight the desired role and press MENU/OK to assign it to the selected button.
The Fn (Function) Buttons N Button assignments can also be selected using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING. AE LOCK ONLY, AF LOCK ONLY, AE/AF LOCK, and AF-ON cannot be assigned to the touch function buttons (T-Fn1 through T-Fn4). AF-ON If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway.
E MY MENU Access a personalized menu of frequently-used options. To display “my menu”, press MENU/OK in the shooting display and select the E (MY MENU) tab. MY MENU SELF-TIMER INTERVAL TIMER SHOOTING FILM SIMULATION GRAIN EFFECT SHUTTER TYPE IS MODE FACE/EYE DETECTION SETTING ISO EXIT N The E tab is only available if options have been assigned to MY MENU.
MY MENU 2 Press the focus stick (focus lever) up or down to highlight ADD ITEMS and press MENU/OK. Options that can be added to “my menu” are highlighted in blue. MY MENU SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE SELECT CANCEL N Items currently in “my menu” are indicated by check marks. 3 Highlight an item and press MENU/OK to add it to “my menu”.
MEMO 258
Peripherals and Optional Accessories 259
External Flash Units Flash units can be mounted on the hot shoe or connected via the sync terminal. Peripherals and Optional Accessories Optional external flash units are more powerful than the EF-X8 supplied with the camera. Some support high-speed sync (FP) and can be used at shutter speeds faster than the sync speed, while others can function as master flash units controlling remote units via optical wireless flash control.
External Flash Units Flash Settings To adjust settings for a flash unit mounted on the hot shoe or connected via the sync terminal: 1 2 Connect the unit to the camera. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING EXIT Menu Description P SUPPLIED Displayed when the supplied EF-X8 flash unit 107 FLASH is mounted on the hot shoe and raised.
3 Highlight items using the focus stick (focus lever) and rotate the rear command dial to change the highlighted setting. 4 Press DISP/BACK to put the changes into effect. MODE SUPPLIED FLASH ADJUST END Peripherals and Optional Accessories Red-Eye Removal Red-eye removal is available when an option other than OFF is selected for F FLASH SETTING > RED EYE REMOVAL and a “FACE ON” option is selected for G AF/MF SETTING > FACE/EYE DETECTION SETTING.
External Flash Units SYNC TERMINAL SYNC TERMINAL is displayed if the EF-X8 is lowered and either no flash unit, or an incompatible flash unit, is mounted on the hot shoe. MODE SYNC TERMINAL ADJUST END Setting Peripherals and Optional Accessories Description Choose from the following options: • M: A trigger signal is transmitted via the hot shoe X conA Flash tacts when a picture is taken.
SHOE MOUNT FLASH The following options are available with optional shoe-mounted flash units. MODE SHOE MOUNT FLASH ADJUST Setting Peripherals and Optional Accessories A Flash control mode 10 264 END Description The flash control mode selected with the flash unit. This can in some cases be adjusted from the camera; the options available vary with the flash. • TTL: TTL mode. Adjust flash compensation (B). • M: The flash fires at the selected output regardless of subject brightness or camera settings.
External Flash Units Setting Peripherals and Optional Accessories Description The options available vary with flash control mode. • TTL: Adjust flash compensation (the full value may not be applied if the limits of the flash control system are exceeded). In the cases of the EF-X20, EF-20, EF-42, and EF-X500, the selected value is added to the value selected with the B Flash compen- flash unit. sation/output • M/MULTI: Adjust flash output (compatible units only).
Setting C Flash mode Peripherals and Optional Accessories (TTL) 10 266 Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken.
External Flash Units Setting D Sync F Lighting 267 Peripherals and Optional Accessories E Zoom Description Control flash timing. • H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice). • I (2ND CURTAIN): The flash fires immediately before the shutter closes. • R (AUTO FP(HSS)): High-speed sync (compatible units only). The camera automatically engages front-curtain high-speed sync at shutter speeds faster than the flash sync speed.
Setting Peripherals and Optional Accessories Description Choose how the built-in LED light functions during still photography (compatible units only): as a catchlight (M/CATCHLIGHT), as an AF-assist illuminator (N/AF ASSIST), or as both a catchG LED light light and an AF-ASSIST illuminator (O/AF ASSIST+ CATCHLIGHT). Choose OFF to disable the LED during photography. G Number of Choose the number of times the flash fires each flashes * time the shutter is released in MULTI mode.
External Flash Units MASTER(OPTICAL) The options at right will be displayed if the unit is currently functioning as master flash for FUJIFILM optical wireless remote flash control. MODE MASTER(OPTICAL) ADJUST END Peripherals and Optional Accessories The master and remote units can be placed in up to three groups (A, B, and C C) and flash mode and A flash level adjusted sepaB rately for each group.
Setting A Flash control mode (group A) B Flash control Peripherals and Optional Accessories mode (group B) C Flash control mode (group C) 10 270 Description Choose flash control modes for groups A, B, and C. TTL% is available for groups A and B only. • TTL: The units in the group fire in TTL mode. Flash compensation can be adjusted separately for each group.
External Flash Units Description Adjust flash level for the selected group according to option selected for flash control mode. Note that the full value may not be applied if the limits of the flash control system are exceeded. • TTL: Adjust flash compensation. • M/MULTI: Adjust flash output. • TTL%: Choose the balance between groups A and B and adjust overall flash compensation.
Setting G Flash mode Peripherals and Optional Accessories (TTL) 10 272 Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken.
External Flash Units Setting H Sync J Lighting 273 Peripherals and Optional Accessories I Zoom Description Control flash timing. • H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice). • I (2ND CURTAIN): The flash fires immediately before the shutter closes. • R (AUTO FP(HSS)): High-speed sync (compatible units only). The camera automatically engages front-curtain high-speed sync at shutter speeds faster than the flash sync speed.
External Flash Units Setting K Master K Number of Peripherals and Optional Accessories flashes L Channel L Frequency 10 274 Description Assign the master flash to group A (Gr A), B (Gr B), or C (Gr C). If OFF is selected, output from the master flash will be held to a level that does not affect the final picture. Available only if the unit is mounted on the camera hot shoe as a master flash for FUJIFILM optical wireless remote flash control in TTL, TTL%, or M mode.
Lenses The camera can be used with lenses for the FUJIFILM X-mount. Lens Parts Peripherals and Optional Accessories A Lens hood B Mounting marks C Focus ring D Zoom ring E Aperture ring F O.I.S.
Removing Lens Caps Remove lens caps as shown. Peripherals and Optional Accessories N Lens caps may differ from those shown. Attaching Lens Hoods When attached, lens hoods reduce glare and protect the front lens element.
Lenses Lenses with Aperture Rings At settings other than A, you can adjust aperture by rotating the lens aperture ring (exposure modes A and M). A 16 11 8 5.6 4 2.8 A 16 11 8 5.6 4 Aperture ring Aperture ring Aperture mode switch N When the aperture ring is set to A, rotate the front command dial to adjust aperture.
Lenses with No Aperture Rings The method used to adjust aperture can be selected using D BUTTON/ DIAL SETTING > APERTURE SETTING. When an option other than AUTO is selected, aperture can be adjusted using the front command dial. Peripherals and Optional Accessories N Aperture control defaults to the front command dial, but can be reassigned to the rear command dial using D BUTTON/DIAL SETTING > COMMAND DIAL SETTING. Lenses with O.I.S. Switches If the lens supports optical image stabilization (O.I.S.
Lenses Manual Focus Lenses Slide the focus ring to the front for autofocus. O Note that manual focus may not be available in all shooting modes. The Depth-of-Field Indicator The depth-of-field indicator shows the approximate depth of field (the distance in front of and behind the focus point that appears to be in focus). The indicator is displayed in film format.
Lenses Lens Care Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. Replace the front and rear caps when the lens is not in use.
Connections 281
HDMI Output Camera shooting and playback displays can be output to HDMI devices. Connecting to HDMI Devices Connect the camera to TVs or other HDMI devices using a third-party HDMI cable. 1 2 Turn the camera off. Connect the cable as shown below, making sure the connectors are fully inserted. Insert into HDMI connector Connections Insert into HDMI Micro connector (Type D) O Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
HDMI Output 4 Turn the camera on. You can now shoot and play back pictures while viewing the television display and save pictures to the HDMI device. O The USB cable cannot be used while an HDMI cable is connected. Shooting Shoot photos and record movies while viewing the scene through the camera lens on or saving footage to the HDMI device. N This feature can be used to save 4K and Full HD movies to an HDMI recorder. Playback To start playback, press the camera a button.
Wireless Transfer Access wireless networks and connect to computers, smartphones, or tablets. For more information, visit: http://fujifilm-dsc.com/wifi/ fujifilm Wi-Fi app Smart Phones and Tablets: FUJIFILM Camera Remote Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet to connect to the camera via Bluetooth® or Wi-Fi. For downloads and other information, visit: http://app.fujifilm-dsc.
Wireless Transfer Smart Phones and Tablets: Bluetooth® Pairing Use D CONNECTION SETTING > Bluetooth SETTINGS > PAIRING REGISTRATION to pair the camera with smartphones or tablets. Pairing offers a simple method for downloading photos from the camera. N Photos are downloaded via a wireless connection. Connections Smartphones and Tablets: Wi-Fi Use the WIRELESS COMMUNICATION options in A SHOOTING SETTING or the playback menu to connect to a smartphone or tablet via Wi-Fi.
Wireless Transfer Computers: FUJIFILM PC AutoSave Install the latest version of FUJIFILM PC Autosave to your computer to upload pictures from the camera over wireless networks. For downloads and other information, visit: http://app.fujifilm-dsc.com/en/pc_autosave/ Computers: Wireless Connections You can upload pictures from the camera using the PC AUTO SAVE option in the playback menu.
Connecting to Computers via USB Copy pictures to a computer via USB. Windows (MyFinePix Studio) Use MyFinePix Studio to copy pictures to your computer, where they can be stored, viewed, organized, and printed. MyFinePix Studio is available for download from the following website: http://fujifilm-dsc.com/mfs/ fujifilm mfs Once download is complete, double-click the downloaded file (“MFPS_Setup.EXE”) and follow the onscreen instructions to complete installation.
Connecting the Camera 1 Find a memory card containing pictures you want to copy to the computer and insert the card into the camera. O Loss of power during transfer could result in loss of data or damage to the memory card. Insert a fresh or fully-charged battery before connecting the camera. 2 Ready a third-party USB 2.0 cable with a Micro USB (Micro-B) connector. Turn the camera off and connect the cable, making sure the connectors are fully inserted.
Connecting to Computers via USB 3 4 Turn the camera on. 5 When transfer is complete, turn the camera off and disconnect the USB cable. Copy pictures to the computer using MyFinePix Studio or applications provided with your operating system.
Connecting to Computers via USB O If a memory card containing a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer pictures. Connect the camera directly to the computer; do not use a USB hub or keyboard.
instax SHARE Printers Print pictures from your digital camera to instax SHARE printers. Establishing a Connection Select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
instax SHARE Printers Printing Pictures 1 Turn the printer on. 2 Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. N 3 PRINTER PRINT instax-12345678 CONNECTING TO PRINTER FUJIFILM-CAMERA-1234 CANCEL To print a frame from a burst sequence, display the frame before selecting instax PRINTER PRINT. Use the focus stick (focus lever) to display the picture you want to print, then press MENU/OK.
Technical Notes 293
Accessories from FUJIFILM The following optional accessories are available from FUJIFILM. For the latest information on the accessories available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_cameras/index.html. Rechargeable Li-ion batteries NP-W126/NP-W126S: Additional high-capacity NP-W126/ NP-W126S rechargeable batteries can be purchased as required. Battery chargers BC-W126: Replacement battery chargers can be purchased as required.
Accessories from FUJIFILM Remote releases RR-90: Use to reduce camera shake or keep the shutter open during a time exposure. Stereo microphones MIC-ST1: An external microphone for movie recording. FUJINON lenses XF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount. XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount. Technical Notes Shoe-mounted flash units EF-X500: This clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.
Shoe-mounted flash units (continued) EF-42: This clip-on flash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent). The flash head can be rotated 90° up, 180° left, or 120° right for bounce lighting. EF-X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.).
Accessories from FUJIFILM Grip belts GB-001: Improves grip. Combine with a hand grip for more secure handling. Macro extension tubes MCEX-11/16: Attach between the camera and the lens to shoot at high reproduction ratios. Teleconverters XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×. XF2X TC WR: Increases the focal length of the compatible lenses by about 2.0×. Mount adapters FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses.
Software from FUJIFILM The camera can be used with the following FUJIFILM software. FUJIFILM Camera Remote Establish a wireless connection between your camera and a smartphone or tablet (P 284). http://app.fujifilm-dsc.com/en/camera_remote/ FUJIFILM PC AutoSave Download pictures from your camera over wireless networks (P 286). http://app.fujifilm-dsc.
Software from FUJIFILM MyFinePix Studio Manage, view, print, and edit the many images downloaded from your digital camera (P 287). http://fujifilm-dsc.com/mfs/ fujifilm mfs RAW FILE CONVERTER EX 2.0 View RAW pictures on your computer and convert them into other formats (P 287). http://fujifilm-dsc.
For Your Safety IMPORTANT SAFETY INSTRUCTIONS Instructions: All the safety and operating in• Read Instructions structions should be read before the appliance is operated. Instructions: The safety and operating in• Retain Instructions structions should be retained for future reference. Warnings: All warnings on the appliance and • Heed Warnings in the operating instructions should be adhered to. Follow Instructions Instructions: All operating and use instruc• tions should be followed.
For Your Safety An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Antennas Outdoor Antenna Grounding: If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.
Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. Safety Check: Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.
For Your Safety Do not touch internal parts WARNING Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation.
WARNING CAUTION When carrying the battery, install it in a digital camera or keep it in the hard case. When storing the battery, keep it in the hard case. When discarding, cover the battery terminals with insulation tape. Contact with other metallic objects or batteries could cause the battery to ignite or burst. Keep memory cards, hot shoes, and other small parts out of the reach of small children. Children may swallow small parts; keep out of reach of children.
For Your Safety The Battery and Power Supply Note: Check the type of battery used in your camera ■ Battery Life and read the appropriate sections. At normal temperatures, the battery can be reThe following describes the proper use of batter- charged about 300 times. A noticeable decrease ies and how to prolong their life.
AC Power Adapters (Available Separately) Use only FUJIFILM AC power adapters designated for use with this camera. Other adapters could damage the camera. • The AC power adapter is for indoor use only. • Be sure the DC plug is securely connected to the camera. • Turn the camera off before disconnecting the adapter. Disconnect the adapter by the plug, not the cable. touch during use. This is normal. • If the adapter causes radio interference, reorient or relocate the receiving antenna.
For Your Safety Trademark Information Digital Split Image is a trademark or registered trademark of FUJIFILM Corporation. xD-Picture Card and E are trademarks of FUJIFILM Corporation. The typefaces included herein are solely developed by DynaComware Taiwan Inc. Macintosh, Mac OS, and macOS are trademarks of Apple Inc. in the U.S.A. and other countries. Windows is a registered trademark of Microsoft Corporation in the U.S.A. and other countries.
For Customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Technical Notes FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For Your Safety This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada. Radiation Exposure Statement: The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe.
Technical Notes 12 Wireless Network and Bluetooth Devices: Cautions This product complies with the following EU • Use only in the country in which the device was Directives: purchased. This device conforms to regulations governing wireless network and Bluetooth de• RoHS Directive 2011/65/EU vices in the country in which it was purchased.
For Your Safety • To prevent interference with the above devices, ob- • Do not use this device on board an aircraft. Note that serve the following precautions. Confirm that the RFID transmitter is not in operation before using this device. Should you observe that the device causes interference in licensed transmitters used for RFID tracking, immediately stop using the affected frequency or move the device to another location.
For Your Safety Be sure to read these notes before use Safety Notes WARNING • Make sure that you use the lens correctly. Read Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation.
Product Care To ensure continued enjoyment of the product, observe the following precautions. Camera body: Use a soft, dry cloth to clean the camera body after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then gently wipe with a soft, dry cloth.
Cleaning the Image Sensor Dust that cannot be removed using D USER SETTING > SENSOR CLEANING can be removed manually as described below. O Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning. 1 Use a blower (not a brush) to remove dust from the sensor. O Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor. 2 Check whether the dust has been successfully removed. Repeat Steps 1 and 2 as necessary.
Firmware Updates Updates to product firmware may result in changes not described in the manual. For more information, visit: http://www.fujifilm.com/support/digital_cameras/ software fujifilm firmware Checking the Firmware Version O The camera will only display the firmware version if a memory card is inserted. Turn the camera off and check that a memory card is inserted. 2 Turn the camera on while pressing the DISP/BACK button.
Troubleshooting Consult the table below should you encounter problems using your camera. If you don’t find the solution here, contact your local FUJIFILM distributor. Power and Battery Problem Solution • The battery is exhausted: Charge the battery or insert Technical Notes 12 a fully-charged spare battery (P 32). The camera does • The battery is inserted incorrectly: Reinsert in the correct orientation (P 37). not turn on.
Troubleshooting Problem Solution The camera turns The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 32). off suddenly. Reinsert the battery in the correct orientation Charging does and make sure that the charger is plugged in not start. (P 32). Charging is slow. Charge the battery at room temperature. • There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth.
Problem Solution • The memory card is damaged: Insert a new memory card (P 36). No picture is taken when the shutter button is pressed (continued). • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 32). • The camera has turned off automatically: Turn the camera on (P 42). • You are using a third-party mount adapter: Select ON for SHOOT WITHOUT LENS (P 230).
Troubleshooting Problem Technical Notes Solution • The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove the obstructions (P 139). • The subject’s face occupies only a small area of the frame: Change the composition so that the subject’s face No face is occupies a larger area of the frame (P 139). detected. • The subject’s head is tilted or horizontal: Ask the subject to hold their head straight (P 139). • The camera is tilted: Keep the camera level.
Problem Solution • The subject is not in range of the flash: Position the The flash does not fully light the subject. subject in range of the flash. • The flash window is obstructed: Hold the camera correctly. • Shutter speed is faster than the sync speed: Choose a slower shutter speed (P 64, 72). Pictures are blurred. Pictures are mottled. Technical Notes 12 320 • The lens is dirty: Clean the lens (P 280). • The lens is blocked: Keep objects away from the lens (P 49).
Troubleshooting Playback Problem Solution Pictures are The pictures were taken with a different make or grainy. model of camera. Playback zoom is The pictures were created using RESIZE or with a unavailable. different make or model of camera. • Playback volume is too low: Adjust playback volume (P 213). No sound in • The microphone was obstructed: Hold the camera movie playback. correctly during recording. • The speaker is obstructed: Hold the camera correctly during playback.
Connections Problem Technical Notes Solution The camera is connected to a TV: Pictures will be disThe monitor is played on the TV instead of in the camera monitor blank. (P 282). • The camera is not properly connected: Connect the camera properly (P 282). No picture or • Input on the television is set to “TV”: Set input to “HDMI” (P 282). sound on TV. • The volume on the TV is too low: Use the controls on the television to adjust the volume.
Troubleshooting Wireless Transfer For additional information on troubleshooting wireless connections, visit: http://digital-cameras.support.fujifilm.com/app?pid=x Problem Problem connecting or uploading pictures to smartphone. Solution • The smartphone is too far away: Move the devices closer (P 284). • Nearby devices are causing radio interference: Move 323 Technical Notes the camera and smartphone away from microwave ovens or cordless phones (P 284).
Troubleshooting Miscellaneous Problem Solution • Temporary camera malfunction: Remove and reinThe camera is unresponsive. sert the battery (P 36). • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 32). • The camera is connected to a wireless LAN: End the connection. The camera does Remove and reinsert the battery (P 36). If the not function as problem persists, contact your FUJIFILM dealer. expected. No sound. Adjust the volume (P 210).
Warning Messages and Displays The following warnings appear in the display. Warning 325 Technical Notes Description Low battery. Charge the battery or insert a fuli (red) ly-charged spare battery. Battery exhausted. Charge the battery or insert a j (blinks red) fully-charged spare battery. s (displayed in The camera cannot focus. Use focus lock to focus red with red focus on another subject at the same distance, then reframe) compose the picture.
Warning Description • The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Camera malfunction: Contact a FUJIFILM dealer. Turn the camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn LENS ERROR the camera on. If the problem persists, contact a FUJIFILM dealer. • The memory card is not formatted for use in the camera: Format the card.
Warning Messages and Displays Warning Description • Not enough memory remaining to record additional pictures: Delete pictures or insert a memory card with more free space. • The memory card is not formatted: Format the memory card. The camera has run out of frame numbers (current frame number is 999-9999). Insert a formatted memory card and select RENEW for D SAVE FRAME NO. FULL DATA SET-UP > FRAME NO.. Take a picture to reset frame numbering to 100-0001, then select CONTINUOUS for FRAME NO..
Warning Messages and Displays Technical Notes Warning Description F CAN NOT Movies cannot be rotated. ROTATE CAN NOT SET DPOF The picture cannot be printed using DPOF. F CAN NOT SET Movies cannot be printed using DPOF. DPOF F CANNOT Red-eye removal cannot be applied to movies. EXECUTE Red-eye removal cannot be applied to pictures crem CANNOT ated with other devices.
Memory Card Capacity The following table shows the recording time or number of pictures available at different image sizes. All figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be stored. The number of exposures or length remaining may not diminish at an even rate. 8 GB 16 GB FINE NORMAL FINE NORMAL 540 800 1110 1660 RAW (UNCOMPRESSED) 150 320 RAW (LOSSLESS COMPRESSED) 310 640 9 minutes 20 minutes U2160/29.97P, 25P, 24P, 23.
Specifications System Model Product Number Effective pixels Image sensor Storage media Memory card slot File system File format Technical Notes Image size 12 Lens mount 330 FUJIFILM X-E3 FF170001 Approx. 24.3 million 23.5 mm × 15.6 mm (APS-C), X-Trans CMOS III sensor with primary color filter FUJIFILM-recommended SD/SDHC/SDXC memory cards SD memory card slot (UHS-1) Compliant with Design Rule for Camera File System (DCF), Exif 2.3, and Digital Print Order Format (DPOF) • Still pictures: Exif 2.
Specifications System Sensitivity • Still pictures: Standard output sensitivity equiv- alent to ISO 200 – 12800 in increments of ⁄ EV; AUTO; extended output sensitivity equivalent to ISO 100, 125, 160, 25600, or 51200 • Movies: Standard output sensitivity equivalent to ISO 200 – 12800 in increments of ⁄ EV; AUTO Metering 256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE, CENTER WEIGHTED Exposure control Programmed AE (with program shift); shutter-priority AE; aperture-priority AE; man
System Continuous O Frame rate (JPEG) Frames per burst 14 fps * Up to approximately 35 11 fps* Up to approximately 50 8.0 fps Up to approximately 53 5.0 fps Up to approximately 56 4.0 fps Up to approximately 58 3.0 fps Up to approximately 62 * Available with electronic shutter only. The frame rate varies with shooting conditions and the number of images recorded. In addition, the frame rate and number of frames per burst may vary depending on the type of memory card used.
Specifications System Flash mode • MODE: TTL MODE (FLASH AUTO, STANDARD, SLOW SYNC.), MANUAL, COMMANDER, OFF • SYNC. MODE: 1ST CURTAIN, 2ND CURTAIN • RED EYE REMOVAL: e FLASH+REMOVAL, L FLASH, d REMOVAL, OFF Accessory shoe with TTL contacts X contact; supports sync speeds as fast as ⁄ s 0.39-in., 2,360k-dot color OLED viewfinder with diopter adjustment (−4 to +2 m−1); magnification 0.62× with 50 mm lens (35 mm format equivalent) at infinity and diopter set to −1.
Input/output terminals Digital input/output USB 2.0 High-Speed Micro USB connector (Micro-B) HDMI output HDMI Micro connector (Type D) Microphone/remote ⌀2.5 mm 3-pole mini jack release connector Power supply/other Power supply NP-W126S rechargeable battery (supplied with camera) Camera size 121.3 mm × 73.9 mm × 42.7 mm (32.4 mm (W × H × D) excluding projections, measured at thinnest part)/ 4.78 in. × 2.91 in. × 1.68 in. (1.28 in.) Camera weight Approx. 287 g/10.1 oz.
Specifications Power supply/other Battery life • Battery type: NP-W126S • Photographs: The number of frames varies with the option selected for PERFORMANCE: PERFORMANCE LCD EVF HIGH PERFORMANCE Approx. 260 Approx. 260 STANDARD Approx. 350 Approx. 350 • Movies: The length of footage that can be recorded varies with the movie mode: Continuance Actual Battery life Battery life of Mode of movie capture movie capture U Approx. 50 minutes Approx. 70 minutes i Approx. 60 minutes Approx.
Wireless transmitter Wireless LAN Standards IEEE 802.11b/g/n (standard wireless protocol) Operating frequency • U. S. A., Canada, Taiwan: 2,412 MHz–2,462 MHz (center frequency) (11 channels) • Other countries: 2,412 MHz–2,472 MHz (13 channels) Access protocols Infrastructure Bluetooth® Standards Bluetooth version 4.0 (Bluetooth Low Energy) Operating frequency 2,402 MHz–2,480 MHz (center frequency) EF-X8 shoe-mounted flash unit Guide number GN8 (ISO100), GN11 (ISO200) Dimensions 39.7 mm × 24.2 mm × 63.
Specifications BC-W126 battery charger Rated input 100 V – 240 V AC, 50/60 Hz Input capacity 13 –21 VA Rated output 8.4 V DC, 0.6 A Supported batteries NP-W126S rechargeable batteries Charging time Approx. 150 minutes (+20 °C/+68 °F) Operating 5 °C to +40 °C/ temperature +41 °F to +104 °F Dimensions 65 mm × 91.5 mm × 28 mm/ 2.6 in. × 3.6 in. × 1.1 in., excluding projections (W × H × D) Weight Approx. 77 g/2.7 oz. Weight and dimensions vary with the country or region of sale.
MEMO 338
MEMO 339
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN http://www.fujifilm.com/products/digital_cameras/index.
