Sideboard Version:03/06/2023 1/26
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 40 M5 x 42 mm B x 40 15 x 10 mm C x 80 M3.5 x 14 mm M5 x 40 mm G x 14 Hx8 Ix4 8 x 40 mm M6 x 25 mm 5 mm QG K x 2 SETS L x 16 M x 16 Nx1 F x 11 M3.
1 6 15 4 28 25 26 26 24 22 27 25 6 15 21 32 12 20 23 27 11 5 24 20 16 13 10 19 14 17 9 3 2 29 16 30 8 33 7 17 31 17 4/26
/26
Cx2 1 M3.5 x 14 mm Separate the glide into two parts at first. Fix slide rail 28 to plate 3 using screw(C) as shown. C C C 28 3 3 28 Cx2 2 M3.5 x 14 mm Fix slide rail 28 to plate 5 using screw(C) as shown.
Cx4 3 M3.5 x 14 mm Fix slide rail 28 to plate 4 using screw(C) at first. Flip the plate, fix slide rail again. C 28 C C C 28 28 C 4 4 4 C 28 4 Cx4 4 M3.5 x 14 mm Fix slide rail 28 to plate 6 using screw(C) at first. Filp the plate, fix another slide rail again.
Ax2 Bx2 M5 x 42 mm 15 x 10 mm 5 Insert quickfit screw(A) into plate 13 at first. Cover plate 11 to plate 13 and turn cam lock(B) in plate 11 clockwise to tighten as shown. A A 13 13 A B 11 B 11 B 13 13 Ax2 Bx2 M5 x 42 mm 15 x 10 mm 6 Insert quickfit screw(A) into plate 32 at first. Cover plate 12 to plate 32 and turn cam lock(B) in plate 12 clockwise to tighten as shown.
A x 10 7 M5 x 42 mm Insert quickfit screw(A) into plate 3,plate 5 and plate 4. Please pay attention to the holes where the accessories are inserted and don't use an electric screwdriver which may cause boards crack.
Fx1 B x 10 8 8 x 40 mm 15 x 10 mm Insert long wooden dowel(F) into plate 4 at first. Attach plate 3 and 4 to plate 11 and 13, turn cam lock(B) in plate 11, 13 clockwise to tighten as shown. Attach plate 5 and 4 to plate 12 and 32,turn cam lock(B) in plate 12,32 clockwise to tighten as shown.
Dx4 9 M5 x 40 mm Fix two plate 6 to plate 11 and 12 respectively using screw(D) 6 as shown. 12 D D 6 11 6 D D D 6 12 D 11 D A x 10 10 M5 x 42 mm Insert quickfit screw(A) into plate 1,please don't use an electric screwdriver which may cause boards crack.
B x 10 F x 10 11 15 x 10 mm 8 x 40 mm Knock wooden dowel(F) into plate 3,4,5,6 and cover plate 1 to them, turn cam lock(B) in plate 3,4,5,6 clockwise to tighten as shown.
12 Slide plate 15 and 18 into available slots as shown. 5 15 4 18 15 15 18 3 3 15 15 18 15 15 Ex6 13 M7 x 50 mm Cover plate 2 to plate 3,4,5 using screw(E).
D x 10 N x 1 M5 x 40 mm M6xH7mm 14 Rotate foot peg(N) into plate 33 at first. Fix leg support 33 to plate 29 using screw(D) as shown. 33 Assemble leg 17 to plate 30 and 31 respectively using screw(D) as shown. N 33 Pay attention to the direction of legs.
G x 14 15 M6 x 25 mm Fix the leg components and two plate 16 to plate 2 using screw( G) as shown. 30 G 16 2 G G G 31 G G G G 16 G 2 G 29 G G 31 G G G Hx8 16 5 mm Insert part(H) to side of plate 3,4,5 and place plate 14 as shown.
Cx8 Ix2 Jx2 M3.5 x 14 mm QG BG 17 J I Fix hinge(I) to plate 7 using screw(C). BG QG C C C C I C I 7 25 6m m J I C 7 I Fix hinge(J) to plate 8 using screw(C).
C x 16 18 M3.5 x 14 mm Assemble door 7 to plate 3, door 8 to plate 4 by fixing hinge using screw(C) as shown. Please don't use an electric screwdriver which may cause boards crack.
Cx8 Ix2 Jx2 M3.5 x 14 mm QG BG 19 J I Fix hinge(J) to plate 9 using screw(C). BG QG C C C C C J 9 28 8m m J J I 9 C J Fix hinge(I) to plate 10 using screw(C).
C x 16 20 M3.5 x 14 mm Assemble door 9 to plate 4 , door 10 to plate 5 by fixing hinge using screw(C) as shown. Please don't use an electric screwdriver which may cause boards crack.
If there is misalignment after you install, adjust the screw to the best condition 20/26
D x 16 21 M5 x 40 mm Assemble plate 22,23 to plate 24 and plate 25 respectively using screw(D) as shown. D 32 7m m D 22 24 x2 D D 23 24 D 23 D D D 33 5.
Insert the plate 26 27 along the grooves as shown. 32 7m m 33 5.5 mm 24 22 22 x2 27 23 33 7m m 26 26 23 34 5.5 mm 25 23 x2 A x 16 23 M5 x 42 mm A A Insert quickfit screw(A) into plate 19, 21,20(×2) as shown.
B x 16 24 15 x 10 mm Assemble 4 drawers and turn cam lock(B) clockwise to tighten as shown. m .5 33 25 mm m 25 mm mm 9 33 mm 9 m 33 m .5 21 33 B 19 B B B 22 27 22 27 B B B B mm 7 32 23 23 mm 7 32 24 24 19 m m 25 180° B 23 B 2 m 5m mm 5 7. 34 B B 20 22 m m 25 25 mm B B 20 22 26 B B 23 m 5m . 5 33 26 m 5m . 7 34 mm 5 5.
L x 16 25 M3.5 x 12 mm Fix runner 28 to plate 22 and 23 using screw(L) as shown. L 22 23 L 23 L 28 28 x4 L 26 Align rails and slide slightly.
C x 16 M x 16 27 M3.5 x 14 mm Reinforce back plate using part(M) and screw(C) as shown.
Cx4 K x 2 SETS 28 M3.5 x 14 mm Install anti-tipping device as your required.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
