Separate glides into 2 parts. Fix slide rail 15 to board 5 and 6 with screw(D) as shown. Please pay attention to the holes where the accessories are inserted.
Insert quickfit screw(A) into corresponding holes in board 5 and 6 with screwdriver as shown. Please don't use an electric screwdriver or use force to rotate, may cause crack.
Attach plank 14 and 30 to board 5 with wooden dowel(E) and turn cam locks(B) clockwise to tighten as shown.
Attach board 6 to the component with wooden dowel(E) and turn cam locks(B) clockwise to tighten as shown.
Insert quickfit screw(A) into corresponding holes in board 5 and 4 with screwdriver as shown.
Connect board 4 and 5 to board 3 with wooden dowel(E) and turn cam locks(B) clockwise to tighten as shown. Connect board 4 and 5 with bar 29 using screw(P) as shown.
Attach board 2 to board 4,5,6 with screw(C) as shown.
Insert quickfit screw(A) into corresponding holes in board 1 as shown.
Cover board 1 to the assembled unit with wooden dowel(E), and turn cam locks(B) clockwise to tighten as shown.
Fix leg and leg support to board 2 with screw(D) as shown.
Fix back board 8 to the assembled unit with screw(D) as shown.
Reinforce the back board with part(N) and nail(J) as shown.
Insert quickfit screw(A) into board 27 at first, attach board 20 and 21 to board 27 and turn cam locks(B) clockwise to tighten as shown.
Insert quickfit screw(A) into board 19 at first,attach board 19 to board 22 and turn cam locks(B) clockwise to tighten as shown. Attach board 19 to board 27 with screw(F) as shown.
Insert quickfit screw(A) into corresponding holes in board 25 and 26 with screwdriver as shown.
Attach board 25 and 26 to the component and board 23 with wooden dowel(E), and turn cam locks(B)clockwise to tighten as shown.
Attach board 18 to board 26,27,25 with screw(F) as shown.
Fix back board 24 to the component with screw(D) as shown.
Reinforce the back board with part(N) and nail(J) as shown.
Insert quickfit screw(A) into corresponding holes in board 1 with screwdriver as shown. Attach both 2 components with wooden dowel(E), and turn cam locks(B)clockwise to tighten as shown. Fix board 1 and 23 with screw(C) as shown. Fix part(G) to board 24 with screw(H) as shown.
Fix hinge(I) to board 28 with screw(D) as shown. Fix knob(G) to board 28 with screw(H) as shown.
Fix hinge(I) to board 7 with screw(D) as shown. Fix knob(G) to board 7 with screw(H) as shown.
Attach board 28 to the upper cabinet by fixing hinge with screw(D) as shown.
Attach board 7 to the lower cabinet by fixing hinge with screw(D) as shown.
Attach board 10,11 to board 12 with screw(F). Slide board 13 into available slots.
Insert quickfit screw(A) into board 9 as shown. Attach board 9 to the component and turn cam locks(B) clockwise to tighten as shown.
Fix runner 15 to board 10 and 11 respectively with screw (D) as shown.
Fix part(M) to a proper positon of your wall.Fix anti-dumping device(L) to board 18 with screw(D) at first. Fix part(L) to (M) with screw(F) as shown. Align rails, insert all drawers.