Cabinet Version:06/26/2023 1/18
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 14+1 M6 x 33.
1 2 1PC 1PC 5 3 6 3PCS 9 7 10 13 1PC 1PC 1PC 2PCS 12 1PC 1PC 15 1PC 18 1PC 8 11 14 17 1PC 2PCS 1PC 4 16 1PC 19 2PCS 20 2PCS 21 2PCS 2PCS 2PCS 4/18 2PCS
8 1 7 3 8 6 4 2 9 5 6 5 5 10 16 16 12 13 11 14 20 19 17 15 18 20 19 17 18 21 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
Dx4 1 M5 x 45 mm D 3 D 7 4 4 D D D D Using 4pcs screw(D) to connect panel #7 with panel #4 and #3 as shown. D x 12 2 M5 x 45mm D D D 4 5 D D D D 5 5 D D 2 D D D D Using 12pcs screw(D) to connect 3pcs panel #5 with panel #4 and #2 as shown.
3 Cx6 Dx6 M6 x 30 mm M5 x 45 mm D D D D C D C 1 C D C C 3 4 C 2 D Using 6pcs screw(D) and 6pcs dowel(C) to connect panel #1 with panel #2,#3,#4 as shown. 4 2 3 8 4 8 Slide back panel #8 into avaliable slots as shown.
Ax6 5 M6 x 33.5 mm A A A A A A A 10 Insert 6pcs cam bolt(A) to panel #10 as shown. 6 Dx6 Ex6 M5 x 45mm M6 x 50mm 4 E D 3 E E 2 E D 10 E D D D E D D Using 6pcs screw(D) and 6pcs dowel(E) to connect panel #10 with panel #2,#3,#4 as shown.
7 Cx4 Dx2 M6 x 30 mm M5 x 45 mm 13 C C C C D 14 15 D 14 Using 2pcs dowel(C) to connect panel #15 to the panel #14. D Using 2pcs dowel(C) and 2pcs screw(D) to connect panel #14 with panel #13 as shown. 8 Cx4 Dx8 M6 x 30mm M5 x 45mm Using 4pcs dowel(C) and 8pcs screw(D) to connect panel #11,#12 with panel #14,#15 as shown.
9 16 16 11 13 12 Slide back panel #16 into avaliable slots as shown. 10 Bx6 15 x 10 mm B 10 B B B B B 12 B 13 11 Connect panel #10 with panel #11,12,13, insert cam lock(B) into panel #11,#12,#13 as shown.
Fx4 Gx2 Ix1 Jx2 M4 x 14mm F Fix 2pcs hinge(G) to the door panel #9 with screw(F) as shown. F F G G 9 F F J J G I J Using 2pcs screw(J) to lock the handle(I) to panel #9 as shown. 12 I Fx8 M4 x 14 mm Fx4 9 F F F F Fx4 Fix the hinge of door panel #9 to cabinet with screw(F) as shown.
13 Hx8 5 x 25 mm H H H H H H H 6 H 6 Insert pin(H) into the cabinet and put the shelf panel #6 to the cabinet as shown. 14 Ax8 M6 x 33.5 mm Jx4 I x2 M4 x 16 mm J A J A J A A A 17 I X2 Insert 4pcs cam bolt(A) to panel #17 as shown. Using 2pcs screw(J) to lock the handle(I) to panel #17 as shown.
15 Kx8 Lx4 M3 x 14 mm Using 8pcs screw(K) to lock 4pcs hinge(L) to the cabinet as shown. K K KK KK KK L L L KK L L 16 Kx8 M3 x 14 mm K KK K K K K KK 17 Using 8pcs screw(K) to lock the hinge to the door panel #17 as shown.
17 Fx4 Mx2 M4 x 14mm F M F 11 M 13 F F M Using 4pcs screw(F) to lock the 2pcs flip(M) to the cabinet as shown. 18 F F Dx8 M5 x 45 mm D D 21 D 19 D 18 D X2 Using 4pcs screw(D) to connect panel #18,19 with panel #21 as shown.
Dx8 19 Nx4 M5 x 45 MM D N N D N D 20 D D 21 19 Using 4pcs screw(D) to connect panel #20 with panel #18,#19, #21 as shown. Put the 2pcs sticker(N) to the panel #20 as shown. 18 X2 Bx8 20 15 x 10 mm B B B B 18 B 19 17 B 18 19 B 17 B B Connect panel #18,#19 to the door panel #17, insert cam lock(B) into panel #18,#19 as shown.
21 Fx4 M4 x 14 mm F F F F F 17 F 17 Using 4pcs screw(F) to lock the flips to the door panel #17 as shown. 22 K x 16 O x 16 M3 x 14 mm O O K O K K O K O K O O O O K O K K O K O K K K O K O O O K K O K K Using 16pcs screw(K) to lock the 16pcs plastic buckle(O) to the cabinet as shown.
23 Px2 Qx2 Sx2 Rx2 M4 x 16 mm M4 x 30 mm R P Q R WALL T x 16 P Q S S Q S S 1 Q T R Q S T Cover the holes with sticker(T) as shown. Using screw (P) to lock the L metal (Q) to the top panel#1 as shown. Drill holes on wall, knock part(R) into the holes. Install anti-tipping device as shown.
24 If doors are still not aligned if the hinges are properly correctly, please watch the video. https://youtu.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
