Instruction for Use lnfrared Thermometer (No contact Type) FT-F31-BT, FT-F32-BT , FT-F41-BT, FT-F42-BT FT-F31, FT-F32, FT-F41, FT-F42 - 1 -
INFRARED THERMOMETER (FT-F31, FT-F32, FT-F41, FT-F42, FT-F31-BT,FT-F32-BT, FT-F41-BT, FT-F42-BT) Operating Instruction Please read carefully before use. DESCRIPTION 1. Table of Contents 1. Product Listing 2. Product Overview 3. Outline Drawing 4. The Definition of Symbols 5. Measuring 6. Battery Voltage Display & Replacement 7. Operation Precautions 8. Precaution for Measuring Temperature 9. Product Specification 10. Common question concerning forehead temperature 2.
FT-F32-BT & FT-F32 FT-F42-BT & FT-F42 4. The Definition of Symbols Reading Display Forehead Measuring mode Ambient Temperature Measuring mode Celsius Scale Fahrenheit Scale Low Battery Last Memorized Temperature Display 5. Measuring 1.)No Contact Type Forehead Measuring mode:(Figure5.1B) ●Turn on the “power” button key of the IR Thermometer and then all displayed segments appear briefly as like on(Figure 5.2B);the displayed screen appears last measured temperature data, please see on (Figure 5.
measurement in the meantime ,the measured temperature data appears on the displayed screen (Figure 5.5B)。 ●Before your measuring ,please keep your forehead dry and cleanly. ●When the temperature unit “ ” or “ ” blink then you can process for next measurement. ●If you don’t use again, the power will be automatically switch off within 60 seconds.(for FT-F31,FT-F32); switch off within 10 seconds.(for FT-F41,FT-F42) Figure 5.1B 5.5B Figure 5.2B Figure 5.3B Figure 5.
“ ” and“ ”adjust (Suitable for FT-F32,FT-F32-BT) ●On power off condition, press the “SCAN” button about 10 seconds until the displayed screen appears “- - -” and “ ” or “ ” temperature unit blinks . In this condition, press the “SCAN” button key again to adjust “ ””or “ ” and then it is set up ready for use.
2). Insert new batteries inside the bottom, please be careful the batteries polarity. 7. Operation Precautions 1). Please insert the battery into the bracket when do you use the IR Thermometer on first time. 2). Please keep the probe clean after you used the IR Thermometer. 3). Please keep the IR Thermometer dry and never immerse it in water or any liquid. 4). Do not put the IR Thermometer under high temperature environment on long time and keep away from sunlight, dust and dirt. 5).
8. Precaution for Measuring Temperature Description Meaning Measuring temperature over 43.0℃/109.4℉ Measuring temperature lower than 34.0℃/93.2℉ Environment temperature high than working temperature.10.0℃- 40.0℃(50.0℉- 104.0℉) 9. Specifications Model No. FT-F31,FT-F31-BT ,FT-F32,FT-F32-BT, FT-F41,FT-F41-BT,FT-F42,FT-F42-BT Measuring Range Forehead 34.0℃-43.0℃( 93.2℉-109.4℉) Surface 0.0℃-100.0℃( 32.0℉-212.
drops shall have no harmful effects when the enclosure is titled at any angle up to 15’’ on either side of the vertical. Mode of operation Size (body) Weight(including battery) Measuring Distance Continuous operation L138*W35*H38mm (Suitable for FT-F31,FT-F31-BT ) L120.5*W44*H42.8mm (Suitable for FT-F32,FT-F32-BT) L145*W37*H98mm (Suitable for FT-F41,FT-F41-BT) ) L72*W48*H117.
receiving device such as mobile phone. The additional function of blue tooth infrared thermometer is to transmit the testing result to the APK in the receiving device via blue tooth technology. 10. Common questions concerning forehead temperature: 1). What is the forehead temperature? Forehead temperature is the same temperature as the arterial blood supply under the skin. It is the best determinate of body temperature, and unaffected by the artificial errors and time delays of oral and rectal methods. 2).
the unit does not function properly due to defective parts or assembly, we will repair it free of charge or replace with a new one .We will provide circuit diagrams, component part lists, descriptions, calibration instructions to assist to service personnel in parts repair. Notes: If you have any problems with this device, such as setting up, maintaining or using, please contact with service personnel of FUDAKANG INDUSTRIAL CO.,LTD. Don’t open or repair the device by yourself.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Immunity test Electrostatic discharge (ESD) IEC 60601 test level Compliance level Electromagnetic environment guidance ±6 kV contact ±6 kV contact Floors should be wood, concrete or ±8 kV air ±8 kV air ceramic tile. If floor are covered with IEC 61000-4-2 synthetic material, the relative humidity should be at least 30%. If ESD interfere with the operation of equipment ,counter measurements such as wrist strap, grounding shall be considered.
Immunity test IEC 60601 test level Complian ce level Electromagnetic environment guidance Portable and mobile RF communications equipment should be used no closer to any part of the [EQUIPMENT or SYSTEM], including cables, than the recommended separation distance Conducted RF 3 Vrms IEC 61000-4-6 150 kHz to 80 MHz Not applicable Radiated RF 3 V/m 3 V/m IEC 61000-4-3 80 MHz to 2.5 GHz calculated from the equation applicable to the frequency of the transmitter.
Recommended separation distances between portable and mobile RF communications equipment and the [EQUIPMENT or SYSTEM]. The [EQUIPMENT or SYSTEM] is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
Symbol for ‘CE” Symbol for “electrical and electronic equipment” Symbol for “TYPE BF APPLIED PART” Symbol for “Follow operating instructions” IP22 Symbol for “the IP classification” Symbol for “ RF transmitters” Manufacturer: FUDAKANG INDUSTRIAL CO.,LTD Address :No.8 Yinghe Road, Yuanjiangyuan Management Zone, Changping Town, Dongguan, Guangdong China. Tel: 86-769-81098181 Fax: 86-769-81098187 Website: www.fudakang.com Software Version V3.0 Manual Version: V2.