*** USER’S MANUAL *** FCC ID : SBUFGPXBT01
The Federal Communication Commission Statement This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication.
Bluetooth GPS Receiver User Manual Contents Caution------------------------------------------------------------------------------------------------------------ 2 0. Quick Start----------------------------------------------------------------------------------------------------- 2 1. Introduction---------------------------------------------------------------------------------------------------- 3 2.
Bluetooth GPS Receiver User Manual Caution Read before you start to use: Ø Global position system(GPS) is obtained by American Ministry of National Defense, and they got the full responsibility about the preciseness and the maintenance. Any changes may cause the capacity and preciseness of GPS differed. Ø Consider your safety of driving, we are strongly recommend you not to use this device while you are driving vehicles.
Bluetooth GPS Receiver User Manual Caution: If you are first time to use Bluetooth devices, please read the whole operation manual carefully. Any mis-operation may cause your system not working properly. 1. Introduction FGPXBT01 Bluetooth GPS receiver(FGPXBT01 bellow), is a total solution of GPS receiver. High capacity rechargeable lithium-ion battery inside, GPS antenna, Bluetooth transmit/receive system are included.
Bluetooth GPS Receiver User Manual provide the power to receive GPS signal without any external power supply. Charge with 4 hours can keep the device working over 20 hours. 6.Smart power management solution. Device will automatically shutdown after the Bluetooth interface having been disconnected over 1 hour. 7.Small size design can connect with any handheld devices easily, suitable for vehicle-security requirement. 8.Use reliable and long life flash memory to store program.
Bluetooth GPS Receiver User Manual 3.4. Measurement range Altitude: 16,000m(60,000 feet) Velocity: 515m/sec(1,000knod) Acceleration: 4G(G for gravity unit) Jerk: 20m/sec2 3.5. Power supply External voltage: 5V DC +/- 5% Battery: Main battery: Rechargeable Lithium-ion 3.7V battery (1000mAh), as the working power. Backup battery: Rechargeable Lithium-ion battery 3V, for RTC and store the GPS information. Working current: 33mA(Typical) Working time: Charged with 4 hours, more then 20 hours of working time.
Bluetooth GPS Receiver User Manual 3.8. Miscellanea: Bluetooth transmit frequency: 2.4~2.48GHz Bluetooth input signal sensitivity: -80dbm Minimal GPS signal sensitivity: -175dBW GPS antenna type: Internal passive antenna LED display: Build-in 3-LED display to show the Bluetooth, battery and GPS status. 4. Start to Use Step 1: Charge the battery Please fully-charge the battery with at least 4 hours before you use the GPS receiver firstly. There are 3 ways to charge: purchase the plug type charger.
Bluetooth GPS Receiver User Manual 5. Software/Hardware Usage 5.1. Hardware description 1). FGPXBT01 device function description is shown as below: Charge plug Bluetooth indicator Power/GPS LED Power switch 2).
Bluetooth GPS Receiver User Manual 2) Check your Bluetooth manager if there is any configuration of Bluetooth Serial Port Profile like this: Note: this sample is for your reference only. The screen may various between different models of Bluetooth manager software. 3) If not found, please create a Bluetooth serial port your self. The configuration should be like this: Name it as you wish Please uncheck the secure connection 4) If there is already one, please check the content.
Bluetooth GPS Receiver User Manual 6) Open your Bluetooth places; you should see nothing while using firstly.
Bluetooth GPS Receiver User Manual 10) The follow message will show: 11) And the connection successful message: 12) Back to the Bluetooth service view, you should see the icon changed to [Connected]: 13) If you wish to use the connection more easily next time, you can create a shortcut for this: -10-
Bluetooth GPS Receiver User Manual 14) You will see the shortcut you just created: 5.3. Configuration of connect with PDA Following will show how to configure the Bluetooth connection on IPAQ 2210 Chinese version, and install the GPS Viewer software. It may be different between other PDA models. 1) Power on your PDA as the Bluetooth host. 2) Power on the FGPXBT01. If the battery level is full, you should see 2 LEDs indication: the blue for Bluetooth blinks 3 times/sec.
Bluetooth GPS Receiver User Manual 4) If this is your first time to use Bluetooth GPS, click the Bluetooth mark at the bottom as below: 5)Then the Bluetooth connection wizard show up, select [Explore a Bluetooth device] and click [Next]. In the next page, click the box to search Bluetooth devices. Your PDA will find the Bluetooth GPS and show it in the window. Click the icon to search for service. 6) Back to the [Explore a Bluetooth device] as below. Click [Next] to list service on Bluetooth GPS.
Bluetooth GPS Receiver User Manual 7) Back to the main screen of [Bluetooth manager] as below. Please double-click the icon to connect FGPXBT01. If connection successful, a green arrow will show as below at right. 8) You may start to use any map/navigation software and use the GPS function now. Or you can use the GPS Viewer software bounded in our CD-Rom to verify the function of FGPXBT01 as you wish. 5.4.
Bluetooth GPS Receiver User Manual 2) Insert the CD-Rom into your CD drive. If your auto-run function works, you will see the welcome screen as below: 3) Select the language you preferred.
Bluetooth GPS Receiver User Manual 5) Click the [Install] at the right screen. The setup screen will show up. Please follow the screen guide to install step by step: 6) If your PDA is connected correctly, the installer will call Microsoft active synchronize and install it. You can install them right now. The install procedure is complete.
Bluetooth GPS Receiver User Manual 7) The installer will create an icon on your desktop. Please double-click it to start program: 8) GPS Viewer main screen will shows up, please select the proper COM port ID and baud rate, and click [Open GPS] to begin the test. The COM port id is COM5 in our PC; please select the corresponding ID base on your Bluetooth manager.
Bluetooth GPS Receiver User Manual 11) Here is the main screen of GPSViewer, and the basic function description as below: (1) (4) (2) (3) (6) (5) (7) (8) (9) (1) Com Port: COM port ID to connect with GPS device. (2) Baud rate: COM port data transfer rate. (3) Scan: Search the COM port ID automatically. (4) Open GPS: Connect to GPS receiver. (5) Power Save: The GPS receiver working in an extremely low power cost, extra power saving mode is not necessary.
Bluetooth GPS Receiver User Manual 13) Click [GPS Status] to see the satellite view. If the GPS receiver can acquire position successful, the position fix result will show as below: 6. Warranty The Bluetooth GPS receiver is warranty for free from defect in material and function for 1 year from the date of purchase. Any failure of this product within the period under normal conditions will be replaced at no charge to the customers.
Bluetooth GPS Receiver User Manual 7. Trouble Shooting 7.1 Problem of Configuration Error Cause Trouble shooting Can not find the GPS Install not correct or battery low device through Bluetooth interface Check if FGPXBT01 is installed properly, and confirm the battery level is suitable (green LED blinks or none LED) Unable the connect through Bluetooth Configuration incorrect Please refer section 5.2 to re-install. Or refer to your PDA’s user manual for configuration.
Bluetooth GPS Receiver User Manual n Ø Beside some buildings, GPS signal is disturbed. Ø Inside forests, or too many covers, GPS signal is disturbed. If you use G-Mouse inside the car, some sun-control film will makes the GPS signal low or lost. n GPS satellite is owned by America military, sometimes they will tune-down the accuracy by some reason. In such cases, the GPS position may not fixed exactly. 7.
Bluetooth GPS Receiver User Manual n Please wait longer. Inquire position from satellites may cost several minutes depends on your GPS signal quality. n Please make sure that you put the G-Mouse GPS receiver at a proper place. Some sun-control film for car may cutoff the satellite signal. You may replace it and try again. Please make sure that you are not inside of somewhere the GPS signal shaded. Please reference the chapter [Satellite Signal Problem] about this. 8.
