*** USER’S MANUAL *** FCC ID : SBUFGPSBT04
The Federal Communication Commission Statement This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication.
Bluetooth GPS Receiver BT1.
Bluetooth GPS Receiver User Manual Contents Caution------------------------------------------------------------------------------------------------------------ 2 0. Quick Start----------------------------------------------------------------------------------------------------- 2 0.1. Inside the package------------------------------------------------------------------------------------ 2 0.2. Connect to your PC/PDA---------------------------------------------------------------------------- 2 1.
Bluetooth GPS Receiver User Manual Caution Read before you start to use: Global position system (GPS) is obtained by American Ministry of National Defense, and they got the full responsibility about the preciseness and the maintenance. Any changes may cause the capacity and preciseness of GPS differed. If you use this device inside of buildings, tunnels, or any huge objects beside you, the GPS signals might be cut-off or disturbed. Please do not consider that the receiver is malfunction.
Bluetooth GPS Receiver User Manual 1. Introduction BT1.5 Bluetooth GPS Receiver is a total solution of GPS receiver. High capacity rechargeable lithium-ion battery, GPS antenna, Blue tooth transmit/receive system are included. It is designed on the most advantage SiRF starIII chip solution, got the full-function, industry-level locating capacity and low prices. You can use this Bluetooth GPS Receiver as vehicles navigator, security system, geographic measurement, investigations or agriculture purpose. BT1.
Bluetooth GPS Receiver User Manual 3. Technical Specification 3.1. General Core Module: Built-in high performance SiRF starIII chipset. Satellite channel number: all-in-view 20 parallel satellites; GPS frequency: 1575.42 MHz Receiver: L1, C/A code. Antenna type: Built in passive patch antenna External connector: MMCX (standard) 3.2. Acquisition Time Refresh: 0.
Bluetooth GPS Receiver User Manual B)NMEA code support: GPGGA(1 sec interval) GPGSV(5 sec interval) GPGSA(1 sec interval) GPRMC(1 sec interval) GPVTG(1 sec interval) C) Compatible with Blue tooth devices with Serial Port Profile (SPP) ΘBlue tooth version 1.1 compliant ΘBlue tooth Class 2 operation (up to 10 meter range) ΘFrequency : 2.400 to 2.480 GHz ΘInput Sensitivity: -83dBm! 3.7.
Bluetooth GPS Receiver User Manual 4. Start to Use Step 1: Charge the battery in first use Please fully-charge the battery with at least 4 hours before you use the GPS receiver firstly.
Bluetooth GPS Receiver User Manual 5. Software/Hardware Usage 5.1. Hardware description 1). Bluetooth GPS Receiver device function description is shown as below: Passive antenna Power switch Power/GPS LED inside(face to open sky) Bluetooth indicator External Antenna MMCX Plug 2).
Bluetooth GPS Receiver User Manual 5.2. Configuration setup with PC connection Here is a sample to show you how to connect the Bluetooth GPS Receiver with your PC, software install and basic function test. 1) First, select a PC with Bluetooth interface. Or you can purchase Bluetooth adapter for your PC. Please contact with your PC’s sales about this. 2) Check your Bluetooth manager if there exist any configuration of Bluetooth Serial Port Profile like this: Note: this sample is for your reference only.
Bluetooth GPS Receiver User Manual 6) Open your Bluetooth places; you should see nothing while using firstly.
Bluetooth GPS Receiver User Manual 10) The follow message will show: 11) And the connection successful message: 12) Back to the Bluetooth service view, you should see the icon changed to [Connected]: 13) If you wish to use the connection more easily next time, you can create a shortcut for this: -10-
Bluetooth GPS Receiver User Manual 14) You will see the shortcut you just created: 5.3. Configuration setup with PDA connection Following will show how to configure the Bluetooth connection on PDA. It may be different from other PDA models. 1) Power on your PDA and the Bluetooth host. 2) Power on the GPS Receiver. If the battery is ready, you should see 2 LEDs indication: the blue for Bluetooth blinks 3 times/sec. It means the Bluetooth module is activated and waiting for connection.
Bluetooth GPS Receiver User Manual 3) See the screen, click Bluetooth mark at bottom, and [Bluetooth Manager] as below: 4) If this is your first time to use Bluetooth GPS, click the Bluetooth mark at the bottom as below: 5)Then the Bluetooth connection wizard show up, select [Explore a Bluetooth device] and click [Next]. In the next page, click the box to search Bluetooth devices. Your PDA will find the Bluetooth GPS and show it in the window. Click the icon to search for service.
Bluetooth GPS Receiver User Manual 6) Back to the [Explore a Bluetooth device] as below. Click [Next] to list service on Bluetooth GPS. [SPP slave] should appear in the service list box, click it and click [Next] to finish shortcut creation. Don’t forget to uncheck the secure connection box. 7) Back to the main screen of [Bluetooth manager] as below. Please double-click the icon to connect the Bluetooth GPS Receiver . If connection successful, a green arrow will show as below at right.
Bluetooth GPS Receiver User Manual 2) Insert the CD-Rom into your CD drive. If your auto-run function works, you will see the welcome screen as below: 3) Select the language you preferred.
Bluetooth GPS Receiver User Manual 4) Click the [Useful tools and PocketPC utility] at the left: 6. Warranty The Bluetooth GPS receiver is warranty for free from defect in material and function for 1 year from the date of purchase. Any failure of this product within the period under normal conditions will be replaced at no charge to the customers. This warranty does not cover failures due to abuse, misuse, accident, or unauthorized alteration or repairs, inappropriate disassemble.
Bluetooth GPS Receiver User Manual Error/Problem Cause Trouble shooting input for a few minutes. Bluetooth (2) Correct with right baud rate & interface will be reset in such case. com port (2) Wrong baud rate or com port setting Unstable GPS signal (1) degrade by anti-sunlight film Plug External antenna and place on with receiver placed inside car car roof (2) some cases described in sec7.2 Poor GPS signal (1) FGPNBT03 Storm effect (2) Atmosphere turbulences (3) SA ON by USA military. NA 7.
Bluetooth GPS Receiver User Manual Inside forests, or too many covers, GPS signal is disturbed. If you use the Bluetooth GPS Receiver inside the car, some anti-sunlight windscreen film will make the GPS signal degraded or signal blank. GPS satellite is owned by America military, sometimes they will tune-down the accuracy by some reason. In such cases, the GPS position may not fixed exactly.