Tobii Dynavox I-Series User’s Manual I–13 I–16
User’s manual Tobii Dynavox I-Series Version / All rights reserved. Copyright © Tobii AB (publ) No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form, by any means (electronic, photocopying, recording, or otherwise) without the prior written permission of the publisher.
Table of Contents 1 Introduction ................................................................................................................................... 6 1.1 1.2 1.3 1.4 2 Safety...........................................................................................................................................11 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 3 3.3 3.4 Key Features .............................................................................................
5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.10 6 5.1.2 Password Information...........................................................................................23 Shutting Down the Device....................................................................................................24 Using Eye Gaze ..................................................................................................................24 5.3.1 Positioning ........................................................................
6.2 6.3 6.4 6.5 Appendix A Cleaning of the Tobii Dynavox I-Series Device.......................................................................42 Placement ..........................................................................................................................42 Transporting the Tobii Dynavox I-Series Device .....................................................................42 Disposing of the Tobii Dynavox I-Series Device ...............................................................
1 Introduction Thank you for purchasing a Tobii Dynavox I-Series device from Tobii Dynavox! To ensure the optimal performance of this product, please take the time to read this manual carefully. The Tobii Dynavox I-Series device is available in two different sizes: the Tobii Dynavox I–13 with a 13.3" screen and the Tobii Dynavox I–16 with a 15.6" screen. The Tobii Dynavox I-Series is a Eye Gaze device but can be ordered without the Eye Gaze function. This User’s Manual covers: ● ● 1.
Symbol or Markings Description Power Connector Head phone jack 3,5 mm Dispose of in accordance with your country's requirements.
Symbol or Markings Description Enclosure ingress protection code per IEC 60529 China Compulsory Certificate The most recognized International Safety mark. This safety listing signifies that the product was tested to IEC60601–1 China RoHS compliance. RoHS directive compliance. 1.
1.3.2 Portable Use A portable Tobii Dynavox I-Series can be used in two (2) different positions. ● ● Upright orientation Mounted (see section 1.3.3 Mounted Use) Upright Orientation 1.3.3 Mounted Use The Tobii Dynavox I-Series can be mounted on to several mounting systems. Mount the Tobii Dynavox Quick Release (QR) adapter plate on to the device. The Tobii Dynavox QR adapter plate can be attached to the following support systems: ● ● REHAdapt/ConnectIT Daessy For more information, see 3.
● ● ● ● ● ● 10 1 Tobii Dynavox I-Series User’s Manual (on the device as a PDF document) 1 Quick Start Manual (printed) 1 Snap + Core First Training Cards 1 Communicator 5 Training Cards 1 Safety and Compliance documents (printed) 1 Warranty Document (printed) 1 Introduction #12004244 Tobii Dynavox I-Series User’s manual v.
2 Safety The Tobii Dynavox I-Series device has been tested and approved as compliant to all the Specifications and Standards listed in Appendix B Compliance Information, page 46 of this manual and in the Appendix D Technical Specifications, page 51 – including, but not limited to, the Medical Device Standard (Class 1/Type B).
2.2 Temperature When used in direct sunshine or in any other hot environment the Tobii Dynavox I-Series device may have hot surfaces. There are built-in temperature sensors that monitors the temperature. If the sensors detects temperatures above the temperature specified in Table E.1 Maximum Allowed Temperature, page 55, the device will automatically trigger a Windows Shut Down or Hibernate (depending on Windows Power Button configuration) to prevent risk of harm to the user.
2.4 Mounting The Tobii Dynavox I-Series should be mounted according to MANUFACTURER instructions of approved mounts. Tobii Dynavox or its agents are not liable for damage or injuries to a person or its property due to a Tobii Dynavox I-Series falling from a mounted configuration. The mounting of a Tobii Dynavox I-Series is done entirely at the user’s own risk. 2.5 Emergency Do not rely on the device for emergency calls or banking transactions.
2.11 Environmental Control The Programmable IR Remote Control — Environmental Control Unit (ECU) is not to be relied on as the only method of interaction with IR controlled devices. 2.12 Eye Gaze Some people may experience a certain amount of fatigue (due to intentional eye focusing and hard concentration) or even a dryness of the eyes (due to less frequent blinking) when first getting used to Eye Gaze.
3 3.1 Overview of the Tobii Dynavox I–13 and I–16 Key Features The Tobii Dynavox I-Series has several built-in features. Some of these come standard and some can be ordered as additional features. Standard features: 2 × Camera, 1 × microphone, 2 × speakers, 1 × IR ECU (Environmental Control Unit), 1 × Bluetooth® and 1 × WLAN (Wireless Local Area Network) 3.2 Product Layout A Tobii Dynavox I-Series device has a color Capacitive touch, LED Backlight screen. The Tobii Dynavox I–13 has a 13.
3.2.2 Ports, Sensors and Device Buttons 1 6 2 3 4 7 5 8 9 Figure 3.
10 11 12 13 14 15 14 Figure 3.2 Back Position Description Position Description 10 Camera 8 MP Auto Focus (AF) 13 Mounting Holes for mounts bracket 11 Power Button 14 Speakers 12 Rear display 15 Programmable IR Remote/ ECU (transmitter and receiver) #12004244 Tobii Dynavox I-Series User’s manual v.
16 19 17 20 21 Figure 3.3 Bottom, Left, and Right Side Position Description Position Description 16 Power Connector 19 Switch Port 1 17 USB 3.0 connectors (2) 20 Switch Port 2 18 Head phone jack 3,5 mm 21 Battery Cover Never force a connector into a port. If the connector and port do not join with reasonable ease, they probably do not match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port.
Daessy REHAdapt Make sure the required side of the Tobii Dynavox QR adapter plate is face away from the Tobii Dynavox I-Series for the mounting system to use. 3.4.1 Mounting the Tobii Dynavox QR Adapter Plate To mount the Tobii Dynavox QR adapter plate: 1. 2. 3. 4. 3.4.2 Place the Tobii Dynavox I-Series device face down on a flat surface. Select the required side of the plate, see 1.3.3 Mounted Use, page 9. Place the plate onto the device with the required side facing away from the unit.
4 4.1 Batteries in the Tobii Dynavox I-Series Batteries The Tobii Dynavox I-Series device has one built-in battery and a battery indicator. The battery indicator will send out a warning of Low battery when the battery drops below 10% of its capacity. If the Tobii Dynavox I-Series device is not powered up by the power supply for charging, the Tobii Dynavox I-Series device will shut down automatically. For more information, see Appendix D Technical Specifications, page 51. 4.2 1. 2.
5. Push the new battery into the battery compartment. Align the two battery icons, one is located on the battery and one on the device, for the battery to be in the correct position. 6. Place the battery cover back in place. 7. Tighten the five (5) screws with a Phillips screwdriver. #12004244 Tobii Dynavox I-Series User’s manual v.
5 Using the Tobii Dynavox I-Series No skill other then reading is necessary for setting up the Tobii Dynavox I-Series device. Follow this User´s Manual and the Quick Start Manual. 5.1 Starting the Device Start the device in one of the following ways: ● ● Press the power button on the right side of the device. (Position 10 in Figure 3.2 Back) Activate a configured Switch.
5.1.1.2 Creating a User Account Tobii Dynavox recommends using a Microsoft Account, if possible. Benefits of using a Microsoft Account include One Drive cloud storage to back up files such as photos, videos, etc., simple Password Recovery through Microsoft, ability to purchase paid apps through the Microsoft Store, parental controls, device sync, and Find My Device. If you already have a Microsoft Account you want to use, it is OK to use that Microsoft Account. 1. 2.
If you decide to use a password for your user account on your Tobii Dynavox I-Series device, be sure to write it down in a safe place for later use. Without the operating system’s access password, Tobii Dynavox Support may be unable to assist you until you have recovered it through Microsoft. The password is case sensitive. Should the password window pop up, requiring a password, you need to know the password or where to find it.
This means that for those users leaning sideways or those lying down the Tobii Dynavox I-Series also needs to be tilted in order to keep the users eyes parallel to the screen and at the optimal distance, see Figure 5.2 Positioning when Users Leaning Sideways or Those Lying Down, page 24. Make sure the user is placed comfortably in relation to the optimal positioning of, and distance from, the unit.
1. Select one of the following ways to access the Track Status: ● ● 2. 3. Select the Track Status Button, pos x in Fig y, on the device Open Track Status from within your Tobii Dynavox Snap™+ Core First® / Communicator 5 Position the user. Select the Close button when finished. This button is eye region based so just gaze on the button to activate it. 5.3.4 Eye Tracking Settings 5.3.4.1 The Calibration Tab Calibration profile: Will show the name of the profile that is active.
3. 4. Select Yes to activate the selected profile or No to cancel. Select Close to leave the page. 5.3.4.1.1.2 1. 2. 3. 4. Deleting a Profile Select the button with the name of the profile to delete. Select the Delete button located in the top left corner of the screen. Select Yes to delete the selected profile or No to cancel. Select Close to leave the page. 5.3.4.1.2 Create New Profile 1. Select the Calibration type to use. For more information, see 5.3.4.1.6 Calibration Type, page 29. 2. 3. 4.
5.3.4.1.3.1 Improving Calibration Points If a calibration point is in need of improvement, follow these steps: 1. 2. Toggle the Select points using gaze On/Off check box to On to gaze enable the calibration points in order to select them with gaze. (Optional) Select the calibration points to improve. 3. 4. Select the Improve Point(s) button to start the calibration for the selected calibration points. Repeat step 1–3, if necessary. 5.3.4.1.
5. Select Close to accept the calibration. 5.3.4.1.6 Calibration Type There are two (2) calibration types available: Accurate and Simple. 5.3.4.1.6.1 Accurate Select the Accurate box to activate the most accurate calibration type. With the Accurate calibration type activated the calibration process will be a seven (7) points, “pop the dots” calibration. The Accurate calibration type is the default calibration type. 5.3.4.1.6.
● Large Close: Select the Close button to leave the page. 5.3.4.1.6.2.1 Calibration Area Select the Calibration area button to be able to customize the calibration area. Customizing the calibration area can be useful if you have discovered that the user cannot access certain areas of the screen using Eye Gaze. By sizing the calibration area to exclude the areas that the user cannot access it can improve the overall calibration.
5.3.4.1.7.1 Enabling Wake-on-Gaze To enable Wake-on-Gaze for the device: 1. 2. Make sure the Wake-on-Gaze is toggled On. Select Windows Power Options link to adjust the Power Options (if needed) 5.3.4.1.7.2 Disabling Wake-on-Gaze To disable Wake-on-Gaze for the device: 1. Make sure the Wake-on-Gaze is toggled Off. 5.3.4.2 5.3.4.2.1 The Activation Tab Gaze Settings In the Activation Tab, all the settings for how the user shall interact with Eye Gaze is set.
5.3.4.2.2 Gaze & Switch Settings Minimum Click Duration: The amount of time that the user must press the switch before it makes a selection. Duration Between Clicks: The amount of "dead time" that Windows Control waits before allowing further switch input. Look away before reselecting ● ● On - Choose On to activate Look away before reselecting. When On, the user must first look away from the active gaze region to be able to active the same gaze region again.
Feedback color: Select the Change button to select the color of the feedback dot. For available colors, see Figure 5.3 Available Colors, page 33. Figure 5.3 Available Colors Feedback size: The feedback size of the chosen feedback type can be set to three (3) different values. ● ● ● 5.4 Small Medium Large Using the Stand Adjustable Base The Tobii Dynavox I-Series comes with a Stand Adjustable bBase as an accessory to be able to position the Tobii Dynavox I-Series device in more positions.
2. The Stand Adjustable Base in ready to be used together with the Tobii Dynavox I-Series device. 3. Select in which position to use the Stand Adjustable Base. First position Second position Rotate out the folding prop to its end position to be able to use the Stand Adjustable Base in the second position. 5.5 Using the Cameras The two built-in cameras allows you to take snapshots of items in front of the Tobii Dynavox I-Series device and also from the display side.
For more information about how to use and program the Programmable IR Remote Control, see the Tobii Dynavox Snap + Core First User’s Manual or the Communicator User’s Guide. If the device you are trying to control is not responding, try tilting the Tobii Dynavox I-Series device up or down slightly to change the angle at which the IR signal is being sent. The ECU is not to be relied on as the only method of interaction with IR controlled devices. 5.
1. 2. 3. Open the Tobii Dynavox Hardware Settings> Adaptive Buttons. Select drop down list Select one of the following actions: ● ● ● ● ● 5.9.1.2 Disabled Send Keyboard Key Show/Hide Track Status (Default) Enable/Disable Eye Tracker Pause Calibrate Eye Tracker Square Button To change and select the touch action for the Square button. 1. 2. 3. Open the Tobii Dynavox Hardware Settings> Adaptive Buttons.
5.9.3 Switches 5.9.3.1 Enabling a Connected Switch To enable a connected Switch to power on the device: 1. 2. Open the Tobii Dynavox Hardware Settings> Switches. Make sure the Enable switch “1 or 2” to act as Power On Button is toggled On. 5.9.3.2 Disabling a Connected Switch To disable a connected Switch to power on the device: 1. 2. Open the Tobii Dynavox Hardware Settings> Switches. Make sure the Enable switch “1 or 2” to act as Power On Button is toggled Off. 5.9.4 Touch & Gestures 5.9.4.
5.9.4.1.1 Enabling Edge Swipe To enable Edge swipe on the device 1. 2. Open the Tobii Dynavox Hardware Settings> Touch Screen. Make sure the Edge Swipe is toggled On to enable the Windows 10 Edge Swipe function. 5.9.4.1.2 Disabling Edge Swipe To disable Edge swipe on the device 1. 2. Open the Tobii Dynavox Hardware Settings> Touch Screen. Make sure the Edge Swipe is toggled Off. 5.9.4.2 Lock Screen The Lock Screen is “disabled” by default.
● ● ● ● ● Grid 3 Look to Learn Look to Read Metacom Snap If the If the feature. 5.9.6 symbol is visible after a feature, the I-Series Product Key(s) on the device are valid for that feature. symbol is visible after a feature, the I-Series Product Key(s) on the device are not valid for that System & Diagnostics To view the version and model of the device: ● Open the Tobii Dynavox Hardware Settings > System & Diagnostics.
4. Select the Get Started under the heading of Reset this PC. 5. Select one of these options: ● Keep my files – – – – Reinstalls Windows 10 and keeps your personal files. Removes apps and drivers you installed. Removes changes you made to settings. Removes any apps your PC manufacturer installed. (If your PC came with Windows 10, apps from your PC manufacturer will be reinstalled.
– Removes any apps your PC manufacturer installed. (If your PC came with Windows 10, apps from your PC manufacturer will be reinstalled.) The Configuration Manager will be re-run at startup and reinstall removed (Communicator) applications. Remove everything has two options: – – Without Clean the drive — This option will take about one hour to perform. With Clean the drive — This option will take many hours to perform.
6 Product Care 6.1 Temperature & Humidity 6.1.1 General Use - Operating Temperature The Tobii Dynavox I-Series is best kept in dry conditions at room temperature. The recommended range for temperature and the humidity value for the device is as follows: ● ● ● 6.1.
6.5 Disposing of the Tobii Dynavox I-Series Device Do not dispose of the Tobii Dynavox I-Series Device in general household or office waste. Follow your local regulations for the disposal of electrical and electronic equipment. #12004244 Tobii Dynavox I-Series User’s manual v.
Appendix A Support, Warranty, Training Resources and Troubleshooting A1 Customer Support For support, please contact your local representative or Support at Tobii Dynavox. In order to receive assistance as quickly as possible, make sure you have access to your Tobii Dynavox I-Series device and, if possible, an Internet connection. You should also be able to supply the serial number of the device, which you find on the back of the device.
A5 What do I do if the Status LED Blink Red Three Times when I Try to Start the Tobii Dynavox I-Series? Please connect the power supply and wait a couple of minutes to allow charging before trying to power up the device again. If the device does not starts up correctly, please contact Customer Support, see A1 Customer Support for contact information. Tobii Dynavox I-Series User’s manual v.
Appendix B Compliance Information B1 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications not expressly approved by Tobii Dynavox could void the user’s authority to operate the equipment under FCC rules. B1.
B3 Industry Canada Statement Caution (i) The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p.
B5 Directives and Standards The Tobii Dynavox I-Series complies with the following directives: ● ● ● ● ● ● ● ● ● Medical Device Directive 93/42/EEC Low voltage Directive 2014/35/EU Electromagnetic Compatibility (EMC) Directive 2014/30/EU Radio Equipment Directive (RED) 2014/53/EU RoHS2 Directive 2011/65/EU WEEE Directive 2012/19/EU Reach Directive 2006/121/EC, 1907/2006/EC Annex 17 ISO 14971:2007 ISO 13485:2016 The device has been tested to comply with IEC/EN 60601-1 Ed 3.
Appendix C Computer Device States of Operation and LED Status Table C.1 Computer Device States of Operation Advanced Configuration and Power Interface (ACPI) State Description S0 (Working) Normal operating state - Windows session is running Display will dim and turn off after a time of idle. S3 (Sleep) The device is sleeping. The Windows session is suspended to RAM, allowing a quick resume to state S0 by: 1. 2. 3.
Table C.3 Status LED Description Criteria Comment Color Status Battery Charging Blue Light Battery Fully Charge Green Light Battery charge is under critical level Red Blink three (3) times If the battery charge is under the critical level the device will not start. Please charge the device for at least 10 minutes before trying to start the device. Table C.
Appendix D Technical Specifications D1 Standard Tobii Dynavox I-Series Standard Type/Model Screen Tobii Dynavox I–13 Tobii Dynavox I–16 I–13 I–16 13.3″, LED Backlight Unit, 15.6″, LED Backlight Unit Brightness: 300 Nits Brightness: 350 Nits Screen Resolution 1920 × 1080 pixels (XGA) Touch Panel Projected Capacitive Touch with Gorilla® Glass, 10 point multi touch Rear Display 480 × 128 pixels Dimensions (WxHxD) Weight 30,7 × 27,4 × 10,5 cm 36,9 × 32,6 × 11,2 cm 12.1 × 10.8 × 4.
Standard Tobii Dynavox I–13 Tobii Dynavox I–16 I–13 I–16 Type/Model Deskstand Integrated Mounting Systems Supported Tobii Dynavox QR adapter plate for Daessy and REHAdapt Power Supply 65 W AC adapter IP class IP54 Pass for device only, with I/O covers in place. Adaptor mode is excluded. IP22 In adapter mode. i. Indoor with continuous communication and with Eye Gaze if applicable. ~24 hours with a Power optimized scenario.
Item Specification Remark Storage Timei Maximum 6 months @ charge ≥ 40% Do not store battery packs for a long time with less than 40% charge level. i. It is recommended that the battery shall not be stored in the device if the device is not going to be used within 6 month. If the battery is remove, the battery will not be drained as quickly as stored in the device, D4 Eye Tracker Technical Specifications Working Distance Freedom of Head Movement1 @ 70 cm / 27.
1. 2. 3. 54 Freedom of head movement describes the volume in front of the tracker in which the user must have at least one of the eyes. The numbers are specified parallell/orthogonal to screen surface, assuming eye tracker is at 20 degree angle to screen. The degree-of-accuracy and precision over percentage-of-population numbers result from extensive testing across representatives of the whole population.
Appendix E Maximum Allowed Temperature Table E.1 Maximum Allowed Temperature Allowable maximum temperature for the Tobii Dynavox I-Series metal external surfaces which are likely to be touched Maximum Temperature ℃/℉ Temperature threshold: 55/131 External surfaces temperature allowed External surfaces temperature allowed in an area unlikely to be touched, see position 1 in Figure E.1 Temperature Threshold Area, page 55 for the position of these areas. 60/140 1 Figure E.
Appendix F Approved Accessories Description Model Tobii Dynavox Part No. Tobii Dynavox I-Series AC Adapter (Power Supply) FSP065–DBCM1 12007159 Battery pack TDGG1 12006939 Stand Adjustable Base I-13/I-16 12006959 Quick Release Adapter Plate 12005017 For information about the latest approved Tobii Dynavox Accessories, please visit the www.tobiidynavox.com website or contact your local Tobii Dynavox reseller. 56 Appendix F Approved Accessories Tobii Dynavox I-Series User’s manual v.
#12004244 Tobii Dynavox I-Series User’s manual v. - en-US Copyright ©Tobii AB (publ). Not all products and services offered in each local market. Specifications are subject to change without prior notice. All trademarks are the property of their respective owners. Support for Your Tobii Dynavox Device Get Help Online See the product-specific Support page for your Tobii Dynavox device. It contains up-to-date information about issues and tips & tricks related to the product.
