FS-BOX-V4 FIRMWARE UPGRADE TOOL KIT FIRMWARE UPGRADE TOOL KIT KIT D'OUTILS POUR MISE À NIVEAU DU FIRMWARE Quick Start Guide V4.
1 Introduction FS-BOX-V4 is recommended to work with FS Transceivers & DAC/AOC Cables. It is designed to achieve multiple functions such as online configuration compatibility, diagnosing and troubleshooting, wavelength tuning for tunable transceivers, etc. With built-in rechargeable lithium-ion batteries, supporting operate on APP via Bluetooth and PC via USB, to meet your various configuration scenarios.
Connection instructions App: Scan the QR code, download and install the FS.COM APP. For those who have installed the FS.COM APP, you can directly find the 'Tool' section at the bottom of the page, click 'Go to Configure' in the Tool section, and connect to FS-BOX-V4 via the prompts for the app. (Detailed steps can be found in APP Operation) Web: Login to fsbox.com, connect the FS-BOX-V4 to your PC via USB, download the driver and finish the installation.
5 Hardware Instructions 1 Short press the power button: Power on. 2 Press the power button for 2s: Power off. 3 After powering (Short press the power bottom or powering via USB), the Bluetooth will be enabled automatically. 4 Indicator Light instructions. Power Indicator Power Indicator Off Always Red Always White Breathing White Operation Power Off Low Battery Normal Charge / Fully Charged Charging Bluetooth Indicator Bluetooth Indicator Operation 1. Box is not powered on Off 2.
Status Indicator Status Indicator Operation Breathing White No Inserted Always White Always Red Blinking White 1. Reading Succeeds 2. Configuration Succeeds 1. Reading Failed 2.
11 Einführung Die FS-BOX-V4 wird für die Arbeit mit FS-Transceivern und DAC/AOC-Kabeln empfohlen. Sie ist so konzipiert, dass sie mehrere Funktionen wie OnlineKompatibilitäts-Konfiguration, Diagnose und Fehlersuche, Wellenlängenabstimmung für abstimmbare Transceiver usw. bietet. Mit eingebauten und wiederaufladbaren Lithium-Ionen-Batterien unterstützt die FS Box den Betrieb per APP über Bluetooth und per PC über USB, was die verschiedenen Konfigurationsszenarien erfüllt.
3 Anschlusshinweise App: Scannen Sie den QR-Code, laden Sie die FS.COM-App herunter und installieren Sie sie. Wenn Sie die FS.COM-App installiert haben, finden Sie unten auf der Seite direkt den Abschnitt "Tool", klicken Sie im "Tool" auf "Go to Configure" und verbinden Sie die FS-BOX-V4 gemäß den Anweisungen in der App. (Detaillierte Schritte finden Sie in der FS-APP) Web: Melden Sie sich auf fsbox.
5 Hardwareanleitung 1 Drücken Sie kurz die Einschalttaste: Einschalten. 2 Drücken Sie die Einschalttaste für 2 Sekunden: Ausschalten. . 3 Nach dem Einschalten (kurzes Drücken der Einschalttaste oder Einschalten über USB) wird Bluetooth automatisch aktiviert. 4 Anweisungen der Anzeigen. Stromanzeige Stromanzeige Vorgang Aus Strom aus Immer Rot Immer Weiß Weiß blinkt leicht Schwache Batterie Normales Laden / Vollständig aufgeladen Lädt Bluetooth-Anzeige Bluetooth-Anzeige Vorgang 1.
Statusanzeige Statusanzeige Vorgang Weiß blinkt leicht Nicht eingefügt Immer Weiß Immer Rot Weiß blinkt 1. Lesevorgang erfolgreich 2. Konfiguration erfolgreich 1. Lesevorgang fehlgeschlagen 2. Konfiguration fehlgeschlagen Konfiguration läuft HINWEIS: Zeitgesteuerte Abschaltung: Die FS Box schaltet sich automatisch aus, wenn 15 Minuten lang keine Bedienung erfolgt (keine USB-Stromversorgung).
Sicherheitshinweise 1 Lesen Sie das Benutzerhandbuch, bevor Sie die FS Box benutzen. 2 Verwenden Sie das Gerät nicht in einer staubigen oder feuchten Umgebung oder in der Nähe eines Magnetfeldes. 3 Versuchen Sie nicht, die eingebauten wiederaufladbaren LithiumIonen-Batterien selbst zu ersetzen. Halten Sie das Gerät von Feuer und übermäßiger Hitze fern und vermeiden Sie direkte Sonneneinstrahlung. Zerlegen, verändern, werfen und quetschen Sie es nicht.
1 Introduction Le FS-BOX-V4 est recommandé pour être utilisé avec les Modules et les Câbles DAC/AOC de FS. Ce dispositif est conçu pour accomplir de multiples fonctions telles que la compatibilité de configuration en ligne, le diagnostic et le dépannage, l'accord de longueur d'onde pour les modules réglables, etc.
3 Instructions de Branchement App: Scannez le code QR, téléchargez et installez l'application FS. Pour ceux qui ont installé l'application FS, vous pouvez directement trouver la section 'Tool' en bas de la page, cliquer sur 'Go to Configure' dans la section Tool, et v ous connecter à FS-BOX-V4 via les instructions de l'application. (Les étapes détaillées se trouvent dans APP Operation) Web: Connectez-vous à fsbox.
5 Instructions sur le Matériel 1 Appuyez brièvement sur le bouton de mise en marche : Mise sous tension. . 2 Appuyez sur le bouton de mise en marche pendant 2s : Mise hors tension. 3 Après la mise sous tension (Appui court sur le bouton d'alimentation ou mise sous tension via USB), le Bluetooth sera automatiquement activé. 4 Instructions concernant les indicateurs lumineux.
Indicateur du Statut Indicateur de Statut Variation de Blanc Blanc Rouge Blanc Clignotant Description Non Inséré 1. Lecture réussie 2. Configuration réussie 1. Lecture échouée 2. Configuration échouée Configuration en cours NOTE: Mise hors Tension Temporisée : La FS Box sera automatiquement mise hors tension si elle n'est pas utilisée pendant 15 minutes (Pas d'alimentation USB).
Compliance Information FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm(8 inches)during normal operation. CE FS.COM GmbH hereby declares that this device is in compliance with the Directive 2014/30/EU und 2014/53/EU. A copy of the EU Declaration of Conformity is available at www.fs.
IC ISED Statement English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (A)/NMB-3(A).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian Information on RF exposure and compliance. cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité.
FS.
Q.C. PASSED Copyright © 2022 FS.COM All Rights Reserved.