3-Tray Tool Cart Model No:TC301 IMPORTANT: Please read this manual before using this tool cart and save it for reference.
• To reduce the risk of serious injury, read the following safety instructions before assembling and using . the cart • The product should be positioned on a level surface. • Any assembly or maintenance of the product must be carried out by adults only. • Arrange for necessary manpower when assembling and moving the cart. • Check all nuts and bolts periodically for tightness. When required, tighten. them again. • Do not exceed the following weight limits for this product. Maximum load: 165 lb (75.
Model No TC302 SPECIFICATIONS SPECIFICATIONS 165 lb (75 kg) 100 lb (45.5 kg) 34 lb (15.
KEY PARTS DIAGRAM 4 KEY PARTS DIAGRAM A) Leg 4 PCS B) tray 3 PC C) Fixed castor 2 PCS D) Swivel castor 2 PCS with brake E) Bolt M6 x 12 24 PCS F) Washer M8 G) Handle I) Nut M8 1PC 40 PCS H) Spring washer J) Bolt M8 x 16 16 PCS 16pcs 16PCS
Model No TC302 ASSEMBLY ASSEMBLY 1. Mount the castors to the bottom tray. Bolt the two fixed castors (C) to one side of the bottom tray (B) with eight M8 x 16 bolts (J), eight M8 washers (F) and eight M8 nuts (I) and eight Spring washer (H).Bolt the two swivel castors (D) to the other side of the tray with eight M8 x 16 bolts (J), eight M8 washers (F) and eight M8 nuts (I) and eight Spring washer. (B) (B) (J) (H) (F) (C) (I) 2.
ASSEMBLY 6 4. Put the top tray (B) on the top of the four legs. (B) (E) 5. Attach the handle (G) to the end with the swivel castors (D) using two bolts and two nuts (I).
WARRANTY 7 Model No TC302 SAFETY WARNINGS AND CAUTIONS DO NOT stand on this product . You may fall which may cause personal injury. When moving this product, do not pull it. Push the product to prevent personal injury. BE CAREFUL when opening the drawer. The product may become unstable and tip, which may cause personal injury or product damage. DO NOT mount this product on a truck bed or any other moving object. This may cause pesonal injury or product damage. DO NOT step in/on the drawer.