REMOTE & PLAYCHUK™ MINI USER MANUAL Congratulations on your purchase of the ICON Remote & Playchuk™ Mini for Wii™. The contents of this package include: •1 Remote for Wii •1 Playchuk™ for Wii •1 Wrist Strap •1 Warranty Card •1 User Manual Before using this product, please attach the wrist strap to the end of the Remote.
Synchronization: • Press the “POWER” button on the top left hand side of the Remote to switch it on • Synchronize the Remote with the Wii™ console o Press the “SYNC” button located on the Wii™ console (see figure 4) o Press the “SYNC” button located on the Remote (see figure 5) PUSH SYNC Standby Mode: The Remote will automatically enter standby mode when not in use for a period of time. To exit standby mode, press any button on the Remote.
Troubleshooting Tips: Remote not working: • Change the batteries in the Remote • Remote may be in standby mode (refer to Standby Mode Instructions) • Ensure the Remote is properly synchronized with the Wii™ console • Refer to the Wii™ console Instruction Manual for more troubleshooting tips Playchuk™ not working: • • Ensure the Playchuk™ is properly connected to the Remote (refer to Playchuk™ Instructions) Refer to the Wii™ console Instruction Manual for more troubleshooting tips WARNING: We recom
• Make sure all players use the wrist strap and that the strap is secure. • When sharing a Remote between multiple players, make sure each person uses the wrist strap properly. • Wearing the wrist strap will prevent you from accidentally dropping or throwing the Remote during game play, which could damage the Remote or surrounding objects, or cause injury to other people. DO NOT LET GO OF THE CONTROLLER DURING GAME PLAY.
‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐ Consult the dealer or an experienced radio/TV technician for help. FCC ID: TAZ‐ASD766 MADE IN CHINA FCC STATEMENT 1. This device complies with part 15 of the FCC Rules.
TÉLÉCOMMANDE ET MANUEL DE L’UTILISATEUR PLAYCHUKMC Toutes nos félicitations pour avoir acheté la télécommande ICON et PlaychukMC pour WiiMC. Cet emballage comprend : 1 – Télécommande pour WiiMC 1 – Playchuk pour WiiMC 1 – Dragonne 1 – Carte de garantie 1 – Manuel de l’utilisateur Avant d’utiliser ce produit, veuillez fixer la dragonne à l’extrémité de la télécommande. Diagramme de Fonction : Insertion des piles : • Ouvrir le compartiment des piles situé à l’arrière de la télécommande.
Synchronisation : • Appuyer sur le bouton « POWER » dans le coin supérieur gauche de la télécommande pour la mettre en marche. • Synchroniser la télécommande avec la console WiiMC. o Appuyer sur le bouton « SYNC » situé sur la console (figure 4). o Appuyer sur le bouton « SYNC » situé sur la télécommande (figure 5). Mode attente : La télécommande passe immédiatement au mode attente lorsqu’elle n’est pas utilisée pendant un certain temps.
Dépannage : La télécommande ne fonctionne pas : • Changer les piles de la télécommande. • La télécommande peut être en mode attente (voir les consignes relatives au mode attente). • Veiller à ce que la télécommande soit bien synchronisée avec la console WiiMC. • Lire le manuel de l’utilisateur de la console WiiMC pour obtenir d’autres conseils de dépannage. MC Playchuk • ne fonctionne pas : Veiller à ce que PlaychukMC soit bien raccordé à la télécommande (voir le mode d’emploi de PlaychukMC).
pas laisser échapper le contrôleur et ainsi endommager la télécommande ou les objets avoisinants, ou causer des blessures à autrui. PORTEZ LA DRAGONNE LORSQUE CELLE‐CI EST COMPRISE. • Veillez à ce que tous les joueurs utilisent la dragonne, et que celle‐ci est bien fixée. • Lorsque vous partagez la télécommande avec plusieurs joueurs, veillez à ce que chaque personne utilise la dragonne correctement.
d’interférences. Si cet équipement cause des interférences nuisibles à la réception télé ou radio, ce qui peut être déterminé en éteignant et en allumant l’appareil, nous conseillons à l’utilisateur de prendre les mesures suivantes pour éliminer les interférences : ‐‐ Réorienter ou déplacer l’antenne de réception. ‐‐ Accroître l’espacement entre l’équipement et le récepteur. ‐‐ Brancher l’équipement dans une prise de courant d’un circuit différent de celui auquel le récepteur est branché.