Quick Start Guide

BEFORE YOU START
Set up your refrigerator
Remove tape and glue residue from surfaces before turning on the refrigerator. Choose a place near a grounded electrical
outlet, allowing for clearances for ease of installation, proper circulation, and plumbing and electrical connections.
Before operating for the first time
After you remove all of the package materials, clean the inside of your refrigerator before using it.
See CARE AND CLEANING in your Use & Care Manual.
WITH YOUR MULTI-DOOR REFRIGERATOR
GETTING
started
Your appliance control display*
We recommend you set your temperatures at 37˚F (3°C) for the refrigerator compartment and 0˚F (-18°C) for the freezer. After
24 hours, you can adjust the control as desired, allowing the temperature to stabilize.
*Control display varies by model. See the Use & Care Manual for more detailed information about your appliance.
1
Prior to grocery shopping, we recommend you activate Freeze
Boost to freeze your food faster.
2
The ice maker makes ice until the ice bin is full. Press and hold
Ice Maker for 3 seconds to turn it on/o.
3
Connect allows connection between your refrigerator and the
Frigidaire 2.0 App via your Wi-Fi enabled mobile device.
4
Press and hold for 3 seconds to enable/disable the appliance
control display.
5
Press either + or — to adjust to desired temperature setting
inside the refrigerator or freezer compartment. Adjusting Temp
illuminates until you reach the desired temperature(s).
6
Power Outage illuminates and alert sounds after a power outage
ends until you reset it by pressing any button.
7
Door Open illuminates and alert sounds if the door is open 5+
minutes until you close the door.
8
°F/°C allows you to switch between Fahrenheit (°F)
and Celsius (°C).
9
Replace Water Filter or Replace Air Filters illuminates when it’s
time to change the filters, generally every 6 months.
10
Prior to grocery shopping, we recommend you activate Chill
Boost to cool your food faster.
YOU’RE IN CONTROL
EXTERNAL DISPENSER CONTROL DISPLAY INTERNAL DISPENSER CONTROL DISPLAY
1
2
3
4
5
6
7
9 9
8
1
Select compartment for temperature
change (FREEZER or REFRIGERATOR).
Press either the + or — to adjust to
desired temperature setting.
Freezer temp - Control temperatures
range from -6°F / -21°C to +6°F / -15°C.
Refrigerator temp - Control
temperatures range from +34°F / +1°C
to +44°F / +7°C. This unit is designed
to operate at 37°F Refrigerator/0°F
Freezer. Temperatures should stabilize
within 24 hours of installation.
2
Clear Alerts resets any alarms that are
active and illuminated on the display
(Door Open, High Temp,
Power Outage).
3
Prior to grocery shopping, we
recommend you activate Freeze
Boost to freeze your food faster.
4
°F/°C allows you to switch between
Fahrenheit (°F) and Celsius (°C).
5
Connect allows connection between
your refrigerator and the Frigidaire 2.0
App via your Wi-Fi enabled
mobile device.
6
Press and hold Default Settings for 3
seconds to reset to default settings.
7
Press and hold Water Filter or Air
Filters for 3 seconds to reset after
replacing the filter.
1
2
3
4
5
6
7
10
A21060501 (2109)