User Manual FNGZ60JNPS FNGZ60JNPW FNGZ60JNPV CONTENTS Safety information.......................................2 Safety instructions...................................... 3 Product description.....................................7 Before first use........................................... 8 Hob - Daily use........................................... 9 Hob - Hints and tips.................................. 11 Hob - Care and cleaning...........................12 Oven - Daily use .............................
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
SAFETY INFORMATION • • • • • • • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Remove any spillage from the lid before opening. Let the hob surface cool down before closing the lid. Internally the appliance becomes hot when in operation. Do not touch the heating elements that are in the appliance. Always use oven gloves to remove or put in accessories or ovenware. Before maintenance cut the power supply.
SAFETY INSTRUCTIONS Installation WARNING! Only a qualified person must install this appliance. • Remove all the packaging. • Do not install or use a damaged appliance. • Obey the installation instruction supplied with the appliance. • Always be careful when you move the appliance because it is heavy. Always wear safety gloves. • Do not pull the appliance by the handle. • The kitchen cabinet and the recess must have suitable dimensions. • Keep the minimum distance from the other appliances and units.
SAFETY INSTRUCTIONS Use WARNING! Risk of injury and burns. Risk of electrical shock. • Use this appliance in a household only. • Do not change the specification of this appliance. • Make sure that the ventilation openings are not blocked. • Do not let the appliance stay unattended during operation. • Deactivate the appliance after each use. • Be careful when you open the appliance door while the appliance is in operation. Hot air can release.
SAFETY INSTRUCTIONS Care and Cleaning WARNING! Risk of injury, fire, or damage to the appliance. • Before maintenance, deactivate the appliance. Disconnect the mains plug from the mains socket. • Make sure the appliance is cold. There is the risk that the glass panels can break. • Replace immediately the door glass panels when they are damaged. Contact the Service. • Be careful when you remove the door from the appliance.
SAFETY INSTRUCTIONS • Cut off the mains cable and discard it. • Remove the door catch to prevent children and pets to get closed in the appliance. • Flat the external gas pipes.
PRODUCT DESCRIPTION General overview 1 2 3 4 5 6 7 4 9 3 8 2 1 1 2 3 4 5 6 7 8 9 Button for the spark generator Knobs for the hob Knob for the Minute Minder Knob for the oven functions Button for the lamp and turnspit Grill Lamp Turnspit hole Shelf positions Cooking surface layout 1 5 2 3 4 Accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits. • Turnspit For roasting larger joints of meat and poultry.
BEFORE FIRST USE WARNING! Refer to Safety chapters. Initial Cleaning Remove all accessories from the appliance. Refer to "Care and cleaning" chapter. Clean the appliance before first use. Put the accessories back to their initial position. Preheating Preheat the empty appliance to burn off the remaining grease. 1. Set the maximum temperature. 2. Let the appliance operate for approximately 1 hour. WARNING! Accessories can become hotter than usual. The appliance can emit an odour and smoke. This is normal.
HOB - DAILY USE WARNING! Refer to Safety chapters. Ignition of the burner Always light the burner before you put on the cookware. In the absence of electricity you can ignite the burner without an electrical device. In this case approach the burner with a flame, push the relevant knob down and turn it to maximum position. Keep the knob pushed for equal or less than 10 seconds to let the thermocouple warm up. WARNING! Be very careful when you use open fire in the kitchen environment.
HOB - DAILY USE Turning the burner off To put the flame out, turn the knob to the off position . WARNING! Always turn the flame down or switch it off before you remove the pans from the burner.
HOB - HINTS AND TIPS WARNING! Refer to Safety chapters. Cookware WARNING! Do not put the same pan on two burners. WARNING! Do not put unstable or damaged pots on the burners to prevent from spill and injury. CAUTION! Make sure that pot handles are not above the front edge of the cooktop. CAUTION! Make sure that the pots are placed centrally on the burners in order to get maximum stability and to get lower gas consumption.
HOB - CARE AND CLEANING WARNING! Refer to Safety chapters. General information • Clean the hob after each use. • Always use cookware with clean bottom. • Scratches or dark stains on the surface have no effect on how the hob operates. • Use a special cleaner applicable for the surface of the hob. • Wash stainless steel parts with water, and then dry them with a soft cloth. Cleaning the hob • Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the hob.
OVEN - DAILY USE WARNING! Refer to Safety chapters. Oven Functions OVEN FUNCTION 1-8 APPLICATION Off position The appliance is off. Pizza setting To make pizza. Heat settings Range of temperature levels adjustment for the oven1). Oven lamp To illuminate the oven interior. To use this function, press the button for the lamp and turnspit. Turnspit To spit roasting meat. To use this function, press the button for oven lamp and turnspit.
OVEN - DAILY USE Using the grill The grill temperature cannot be adjusted. To get a lower temperature or slower cooking time, lower the grill pan away from the flame. 3. At the same time push the knob for the oven functions and turn it counterclockwise to the maximum gas flow position. 4. When the flame comes on, keep the knob for the oven functions pushed on the maximum gas flow position for 15 seconds or less to let the thermocouple warm up.
OVEN - DAILY USE CAUTION! Do not put the meat on the highest shelf level. There is a risk of fire. 1. Open the oven door. 2. Push and hold the spark generator button. 3. Turn the oven control knob to Grill . Push the knob in and position hold. 4. Release the spark generator button. 5. Keep the oven control knob in this position for approximately 15 seconds. Do not release it until the flame comes on. 6. Release the oven control knob.
OVEN - CLOCK FUNCTIONS Minute Minder Use it to set a countdown time. This function has no effect on the operation of the appliance. Turn the knob for the timer as far as it goes, then turn it to necessary time period. After the time period is completed, an acoustic signal sounds.
OVEN - USING THE ACCESSORIES Refer to Safety chapters. Put the tray or pan on the shelf position. Make sure it does not touch the back wall of the oven. Inserting the accessories Using the turnspit WARNING! Wire shelf: The wire shelf has a special shape in the rear which help with the heat circulation. WARNING! Be careful when you use the turnspit. The forks and the spit are sharp. There is a risk of injury. WARNING! Use oven gloves when you remove the turnspit. The turnspit and the grill are hot.
OVEN - USING THE ACCESSORIES 4. Install the first fork on the spit, then put the meat on the turnspit and install the second fork. Make sure that the meat is in the middle of the spit. 5. Use the screws to tighten the forks. 6. Put the tip of the spit into the turnspit hole. Refer to "Product description" chapter. 7. Put the front part of the spit on the support hook. 8. Remove the turnspit handle. 9. Light the grill. Refer to "Oven - Daily use" chapter. 10. Press the turnspit button . 11.
OVEN - HINTS AND TIPS WARNING! Refer to Safety chapters. The temperature and baking times in the tables are guidelines only. They depend on the recipes and the quality and quantity of the ingredients used. General information • The appliance has four shelf positions. Count the shelf positions from the bottom of the appliance floor. • Moisture can condense in the appliance or on the door glass panels. This is normal. Always stand back from the appliance when you open the appliance door while cooking.
OVEN - HINTS AND TIPS Cooking table FOOD QUANTITY (G) THERSHELF MOSTAT TIME (MIN) POSI- ACCESSORIES POSITION TION Pastry stripes 250 2 20 - 25 3 baking tray Flat cake 1000 2 35 - 40 3 baking tray Apple pie 1200 + 1200 6 55 - 65 3 2 round aluminized tray (diameter: 20 cm) Small cakes 500 2-3 25 - 30 3 baking tray Fatless sponge cake 350 3 30 - 35 3 1 round tray (diameter: 26 cm) Drip pan cake 1500 2-3 40 - 50 3 baking tray Chicken, whole 1400 8 50 - 60 3 wire shelf
OVEN - HINTS AND TIPS QUANTITY (G) FOOD THERSHELF MOSTAT TIME (MIN) POSI- ACCESSORIES POSITION TION Swiss roll 500 2-3 20 - 25 3 baking tray Meringue 400 1 40 - 50 3 baking tray Petit Choux 500 2-3 30 - 35 3 baking tray Crumble cake2) 1500 5-6 30 - 35 3 baking tray Sponge cake 600 2 30 - 35 3 baking tray 600 3 20 - 25 3 baking tray Buttered cake2) 1) After you switch off the appliance, leave the cake in the oven for 5 minutes. 2) Preheat the oven for 15 minutes.
OVEN - CARE AND CLEANING WARNING! Refer to Safety chapters. Notes on cleaning • Clean the front of the appliance with a soft cloth with warm water and a cleaning agent. • To clean metal surfaces, use a usual cleaning agent. • Clean the appliance interior after each use. Fat accumulation or other food remains may result in a fire. • Clean stubborn dirt with a special oven cleaner. • Clean all accessories after each use and let them dry. Use a soft cloth with warm water and a cleaning agent.
OVEN - CARE AND CLEANING 3 2 2 4. Put the door on a soft cloth on a stable surface. 5. Use a screwdriver to remove 2 screws from bottom edge of door. 7. Clean the oven door with water and soap. Clean inner side of the door. Dry the oven door carefully. When the cleaning is completed, install the glass panels and the oven door. To install the oven door, do the above steps in the opposite sequence. 4 4 6 1 1 5 5 6. Use a spatula made of wood or plastic or equivalent to open the inner door.
OVEN - CARE AND CLEANING WARNING! Danger of electrocution! Disconnect the fuse before you replace the lamp. The lamp and the lamp glass cover can be hot. 1. Deactivate the appliance. 2. Remove the fuses from the fuse box or deactivate the circuit breaker. The back lamp 1. Turn the lamp glass cover counterclockwise to remove it. 2. Clean the glass cover. 3. Replace the lamp with a suitable 300 °C heat-resistant lamp. 4. Install the glass cover.
TROUBLESHOOTING WARNING! Refer to Safety chapters. What to do if... PROBLEM POSSIBLE CAUSE REMEDY There is no spark when you try to activate the spark generator. The hob is not connected to an electrical supply or it is connected incorrectly. Check if the hob is correctly connected to the electrical supply. Refer to the connection diagram. There is no spark when you try to activate the spark generator. The fuse is released. Make sure that the fuse is the cause of the malfunction.
TROUBLESHOOTING PROBLEM The oven does not heat up. POSSIBLE CAUSE The necessary settings are not set. REMEDY Make sure that the settings are correct. The turnspit does not rotate. The turnspit is not correctly installed into the turnspit hole. Refer to "Using the turnspit". It takes too long to cook the The temperature is too low dishes or they cook too or too high. quickly. Adjust the temperature if necessary. Follow the advice in the user manual.
INSTALLATION Minimum distances WARNING! DIMENSION Refer to Safety chapters. Location of the appliance You can install your freestanding appliance with cabinets on one or two sides and in the corner. Keep a distance of about 1 cm between the appliance and the back wall to make sure that the lid opens. For minimal distances for fitting check the table.
INSTALLATION BURNER Ø BYPASS 1/100 MM1) Oven 44 1) Type of bypass (Copreci / BSI) depends on model. Gas burners for NATURAL GAS G20 20 mbar NORMAL POWER KW REDUCED POWER KW INJECTOR MARK 1/100 MM 3,0 0,72 / 0,751) 119 2,0 / 1,91) 0,43 / 0,451) 96 Auxiliary 1,0 0,35 70 Oven 2,7 0,90 120 Grill 1,9 - 108 BURNER Rapid Semi-rapid 1) Type of bypass (Copreci / BSI) depends on model.
INSTALLATION BURNER INJECTOR NORMAL REDUCED POWER MARK 1/100 POWER KW KW MM Grill 1,65 - 71 NOMINAL GAS FLOW G/H 117,83 Gas Connection When checking the flexible pipe make sure: Use a fixed connections or use a flexible stainless steel pipes in compliance with the regulation in force. If you use flexible metallic pipes, make sure they do not come in touch with mobile parts and they are not squeezed.
INSTALLATION Hob injectors replacement A B Replace the injectors when you change the gas type. C 1. Remove the pan supports. 2. Remove the caps and crowns of the burner. 3. Remove the injectors with a socket spanner 7. 4. Replace injectors with the ones necessary for the type of gas you use.
INSTALLATION Oven injector replacement A 1. Remove the bottom plate of the oven cavity (A) to get access to the oven burner (B). B Change from natural gas to liquid gas A 1. Fully tighten the bypass screw. 2. Put the knob back. Change form liquid gas to natural gas 1. Unscrew approximately one turn the bypass screw position (A). 2. Put the knob back. 3. Connect the appliance to the electricity. 2. Release the screw (C), which keep the burner in position.
INSTALLATION D A E F Change from natural gas to liquid gas 1. Fully tighten the bypass screw. 2. Put the knob back. 4. Slowly move it to the left side. Make sure that the burner bush stays on the burner mouthpiece. Do not apply force to the wire of the spark plug connector (F) and to the thermocouple conductor (E). 5. Release the burner injector (D) with a 7 mm socket spanner and replace it with a different one. Assemble the burner in a revers sequence.
INSTALLATION Gas grill injector replacement 1. Release the screws which keep the grill burner in position (A). A Use small feet on the bottom of appliance to set the appliance top surface level with other surfaces. Electrical installation WARNING! The manufacturer is not responsible if you do not follow the safety precautions from Safety chapters. This appliance is supplied with a main plug and a main cable. 2. Release the burner injector with a 7 mm socket spanner and replace it with a different one.
ENVIRONMENTAL CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
867306180-A-142014
