EVAPORATIVE COOLER use & care Introduction ......................................................... 2 The Controls & Operation ............................... 9 Important Safety Information ....................... 3 Cleaning and Maintenance Attention ........ 15 Features ................................................................ 5 Troubleshooting ................................................ 17 Specifications...................................................... 8 Limited Warranty........
INTRODUCTION Welcome to our family Register Your Frigidaire Product Online Today! Take advantage of all the benefits product registration has to offer: Service and Support Diagnose troubleshooting and service issues faster and more accurately Recall Notifications Stay up-to-date on safety notices, system updates, and recall notifications Special Promotions Opt-in for promotions and offers Registering your product information online is safe & secure and takes less than 2 minutes to complete: newai
IMPORTANT SAFETY INFORMATION WARNING Please read all instructions before using this appliance. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov Safety Definitions This is the safety alert symbol. It is used to alert of potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
IMPORTANT SAFETY INFORMATION Safety Instructions else it may cause electric shock and fire or other personal injury). These instructions are not meant to cover every possible condition and situation that may occur. Please read all instructions before using this evaporative cooler. Failure to carefully read all instructions may result in possible electric shock or fire hazard, and will void the manufacturer's warranty. • When cleaning, use ordinary detergent and a soft brush.
FEATURES 1. Wind speed: Low, medium, and high 2. Wind mode: Normal, natural, and sleep 3. Wind oscillation: Horizontal and vertical options 4. Timer shutdown: 1-9 hours timer 5. Water pump cooling/humidification 6. Dry wind function 7. Automatic dimming LED light after 1 minute without action 8. Remote control (operation distance up to 19 ft.) 9. Easy to clean and fill water tank 10. Spray water circulation refrigeration technology for faster cooling 1. Front case 2. Display panel 3. Horizontal blade 4.
FEATURES ACCESSORIES Remote Control FEC450WH00 control panel.
FEATURES Display panel Remote control operation panel Ice pack 7
SPECIFICATIONS Ice pack use: 1. Place ice pack on the freezer until completely frozen. 2. Slide open the water tank, place frozen ice pack inside and close shut. Wait about 10min for the air temperature to decrease. 3. Avoid opening the lid of the ice pack and/or consuming its contents. SPECIFICATIONS MODEL NO: RATED VOLTAGE RATED FREQUENCY RATED POWER NOISE CFM PRODUCT DIMENSIONS FEC450WH00 120V 60Hz 60W ≤55dB (average) 412 11.4” W x 11.4” D x 35.
CONTROLS & OPERATION 9 INSTALLATION METHOD After the product is taken out of the package, it can be used immediately by just plugging it in. Use of each function 1. When it is first powered on, the buzzer beeps twice and the device will enter standby mode, with all function indicators off. All buttons will be inactive except for the "On/Off" button. 2. “On/Off”: In standby mode, press this key to turn the unit into working mode.
CONTROLS & OPERATION 5. “Fan” 5.1 In working mode, press to adjust the wind speed with 1 time for low, 2 for medium, and 3 for high on the control panel. 5.2 Dry wind function: a. In working mode, press and hold for 3 seconds to enter the dry wind function. After starting the LED minutes; light will be on and flash for 20 b. During the operation of the dry wind function, except for keys, all other function keys are blocked (press the seconds to exit the dry wind function).
CONTROLS & OPERATION 7. “Mode” 11 Press to select different wind modes in the following sequence: normal → natural → sleep, and the corresponding LED indicator will turn on. There is no indicator for normal mode. Normal mode: the fan runs at a fixed speed selected without any change. Natural mode: the fan speed fluctuates between low, medium and high on a random pattern.
CONTROLS & OPERATION Notes 1. There is a low water level sensor and alarm: After the water pump works for 60s, and the software detects that the water level is low for 5 consecutive seconds (65 seconds in total), the water pump will stop working and unit will beep 10 times. 2. If there is no activity on the control panel while in working mode for 1min the indicator lights will dim automatically and will return to regular brightness once you press any button on the control panel again. 3.
CONTROLS & OPERATION 13 Water filling: If the cooling and humidification functions are turned on, please add water to the water tank. Before adding water, unlock the water tank knob by rotating the knob to a horizontal position. After the water tank is half drawn out, slowly pour the water into the water tank (Fig. 1, Fig. 2, Fig. 3). After adding the water, return the water tank into its original position, and then lock the water tank knob rotating it to its original vertical position.
CONTROLS & OPERATION Use of remote control 1. First, open the battery cover on the back of the remote control and install a 3V CR2032 battery. 2. When using the remote, point it toward the control panel, which has a receiver on the far right of the panel. 3. When the battery is low, please replace it immediately. Dispose of batteries properly and keep them away from children. Please note that even used batteries could be hazardous.
CLEANING AND MAINTENANCE ATTENTION • Don’t use chemicals when cleaning. 15 • Turn off the power and unplug it to avoid electric shock. • Please use a soft cloth to wipe surface dust, if any: if it’s too dusty, please mix water with a soft detergent, wipe with soft cloth and dry. • When cleaning, please don’t use gasoline, corrosive detergent or solvent that may damage the outer surface.
CLEANING AND MAINTENANCE ATTENTION Installation and use after cleaning 1. Install wet cooling pad and rear net properly in the corresponding sequence. 2. Connect the power supply and ensure normal operation of the unit. Maintenance 1. When not using for a long time, unplug the power cord and pack the product to avoid dust. 2. Make sure that the cooling pad and filter screen are dry and there is no water in the water tank before packaging.
TROUBLESHOOTING 17 Let us help you troubleshoot your concern! This section will help you with common issues. If you need us, visit our website, chat with an agent, or call us. We may be able to help you avoid a service visit. If you do need service, we can get that started for you! Problem Possible Causes Solution The unit does not cool. There is insufficient water in the tank. Check the water level in the tank and make sure there is enough water.
LIMITED WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.
welcome home Our home is your home. Visit us if you need help with any of these things: owner support accessories service registration (See your registration card for more information.) newair.