EVAPORATIVE AIR COOLER FEC180WH00 Owner’s Manual Manual v1.
READ AND SAVE THESE INSTRUCTIONS. TABLE OF CONTENTS Register Your Product Online .................................................................... 3 Safety Information & Warnings ................................................................. 4 Product Components ................................................................................... 6 Features ............................................................................................................ 7 Control and Display Panels .......
REGISTER YOUR PRODUCT ONLINE Register Your Frigidaire Product Online Today! Take advantage of all the benefits product registration has to offer: Service and Support Diagnose troubleshooting and service issues faster and more accurately Recall Notifications Stay up to date on safety notices, system updates, and recall notifications Special Promotions Opt-in for NewAir promotions and offers. Registering your product information online is safe, secure and takes less than 2 minutes to complete: newair.
SAFETY INFORMATION & WARNINGS In order to avoid the dangers caused by misoperation, please read the instruction manual before using the machine. • • • • • • • • • • • • • • This product is for indoor use only. Only use a qualified power outlet that has been checked to meet the regulatory requirements. Please confirm the voltage when relocating.
• • • • • • • After water has been added to the device, do not tilt or collide it into anything in order to prevent water from splashing during placement or relocation. If the product falls with water in it, immediately pull out the power plug and wait 24 hours before turning it on. The water level of the water tank should not exceed the maximum line. When the cooling or humidification function is enabled, the water level in the water tank should not be lower than the minimum line.
PRODUCT COMPONENTS PARTS LIST 1. 2. 3. 4. 5. 6. Function display window Control panel buttons Horizontal louver Vertical louver Vertical louver connecting rod Horizontal louver connecting rod 7. Front case 8. Water level display window 9. Handle 10. Rear case 11. Remote control storage area 12. Air filter 13. Power cord 14. Water tank 15.
FEATURES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
CONTROL & DISPLAY PANELS 1 On/off button 2 Fan speed button (low, medium, high) 3 Mode button 4 Cooling/humidifying button 5 Timer button (1-2-4-8 hours) 6 Left/right oscillation button Diagram of display panel.
Diagram for operation panel of remote control.
PRODUCT INSTALLATION AND USAGE The product can be used immediately after taken out of the package (no installation is required). FUNCTION BUTTONS After plugged into a power outlet, the unit will beep and enter the standby state (all the function indicators and buttons are off). ON/OFF BUTTON 1. In the standby state, press to turn the unit on. Once the unit is on, it will be in the following default state: a. Fan is on low speed .
FAN SPEED BUTTON 1. Press the button to adjust the fan speed in the following sequence: low→ medium → high→ low; the corresponding indicator will light up. COOLING / HUMIDIFYING BUTTON 1. Press the button to turn on/off the cooling/humidifying function 2. To prevent damage to the pump due to long-time work, the pump will automatically stops after 10 hours of continuous operation of the cooling/humidifying function. 3. To draw water out of the water tank, the be on. button needs to TIMER BUTTON 1.
MODE BUTTON 1. Press the button to switch the fan mode in the following sequence: normal➔ natural➔ sleep➔ normal; the corresponding indicator will light up. Normal mode: The product runs at the fan speed set by the user. The speed options include: high, medium and low. Natural mode: The product switches automatically among high, medium and low speeds. This mode simulates a relaxing breeze.
In sleep mode, the indicator of the fan speed changes when the natural mode switches. For example: when the sleep mode is turned on at medium speed, it will switch to low speed natural wind automatically after 30 minutes. At this point, the medium speed indicator turns off, and the low speed indicator turns on. OTHER FUNCTIONS a. Automatic dim function: If there is no button operation in 1 minute after any indicator is on, the indicator will automatically dim (33% of the original brightness).
FILLING WATER When you use the cooling and humidifying function, please add water to the water tank. Before filling the tank with water, you must first open the knob on the tank lock, remove the tank and slowly fill the tank with water. Once the tank is full, place it in the original position and then re-lock the knob on the tank lock. 1. Don not let water exceed the maximum level or fall below the minimum level. 2. Use clean tap water to fill the water tank.
REMOTE CONTROL 1. Open the battery cover on the back of the remote control and install a CR2032 3V battery. 2. Aim the remote at the receiver when using. 3. When the battery needs to be replaced, pull it out and away from the remote. Pay attention to the positive and negative terminals of the battery when replacing the battery. Put the battery cover on to reset the remote for usage.
CLEANING AND MAINTENANCE Please be sure to unplug the power line during cleaning, as it may cause electric shock. 1. If dust accumulates on the outer surface of the unit, please wipe with a damp soft cloth. Use a water and a soap mixture to clean the exterior. 2. Do not use gasoline, thinner, or any substance that may damage the unit CLEANING THE AIR FILTER AND COOLING PAD If too much dust accumulates on the air filter, it will affect the overall performance of this unit.
CLEANING THE WATER TANK 1. Unplug the power supply and turn the water tank knob horizontally to pull out the water tank. 2. Dip a cloth or rag in detergent and wipe the interior of the water tank, then wash with clean water. AIR DRY FUNCTION 1. When you are ready to store the unit and want to dry the cooling pad and air filter after using the humidifying mode, you can press and hold the “fan speed” button for 3 seconds to start the air dry function 2.
LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.
