Product Brochure

Getting started
with your
dishwasher
BEFORE YOU START
Your dishwasher controls
To begin using your dishwasher, open the door and select one of the cycle options from the control
panel. The Wash and Dry settings can then be adjusted based on the cycle chosen. Indicator lights will
illuminate as each cycle or option is selected.
Select cycles and options with the door open. Press START immediately before closing the door.
To add an item, press START again immediately before closing the door to resume the cycle.
Load rack so large items do not block the spray arm or detergent dispenser.
REMEMBER
YOU’RE IN CONTROL
* Your machine may not have all options or features listed above.
Set up your dishwasher
Make sure your top rack, bottom rack and silverware basket are in place and all packing materials and
ties are removed prior to operating the dishwasher. See OPERATING INSTRUCTIONS in the Use & Care
Manual.
Fill Rinse Aid dispenser
Rinse aid greatly improves drying and reduces water spots. Twist o the rinse aid
dispenser cap and fill until the indicator reaches full, then replace cap.
If installed with a garbage disposal
Ensure the knock-out plug has been removed so the dishwasher can properly drain.
See Installation Instructions for further details.
1. Select HEAVY WASH/POWER PLUS* for pots, pans, casseroles
and dinnerware having light to heavily soiled loads.
2. Select NORMAL WASH* for light to heavily soiled loads.
3. Select 30 MIN WASH/QUICK WASH* for lightly soiled loads only.
4. Select CHINA CRYSTAL* for lightly soiled China, Crystal or other
delicate items.
5. Select TOP RACK* for light to heavily soiled small loads in the
upper rack.
6. ENERGY SAVER* uses less energy by washing lightly soiled
loads with less water and the air dry setting.
7. Select RINSE ONLY for rinsing dishware that will be washed later.
8. FAVORITE CYCLE/ MY FAVORITE* program saves preferred
cycle and options to a one touch control. See Use & Care
instructions for details.
9. WASH PRESSURE provides the choice of Scour (extra heavy
soil), Surge (heavy to normal soil) or Spray (light soil).
10. WASH TEMP provides the choice of Sanitize, High or Normal
water temperature.
11. DRY options oer the choice of extended dry time (MaxBoost/Max
Dry), Heat (normal dry time) or Air (air dry only).
The HEAT DRY option in combination with rinse aid will
enhance drying performance.
The 30 MIN WASH/QUICK WASH cycle can add the fan drying
system during the drying cycle. Press the DRY pad, then select
the HEAT option. This option will turn the fan on during the dry
cycle to support drying performance. This option extends the
cycle 30 minutes.
Press and hold the Dry button until the lock icon comes on to
lock the dishwasher controls. Press and hold the Dry button
until the lock icon goes o to unlock the controls.
12. DELAY TIME sets a delayed starting time to begin the wash cycle.
13. START/Cancel starts or cancels a cycle. To start the cycle, press
START/Cancel button and immediately close the dishwasher
door. To cancel the cycle, open the dishwasher door and press the
START/Cancel button until the cycle and option LEDs turn o.
14. STATUS WINDOW* will display remaining time in cycle, delay
time setting or “close door” reminder.
15. INDICATOR LIGHTS* provide cycle status information showing
delayed (delay start), clean (clean non-sanitized) and sanitized
(clean with sanitized option).
A22022701 (2205)

Summary of content (2 pages)