USE & CARE MANUAL THIS AIR CONDITIONER IS EQUIPPED WITH A NEW INDUSTRY STANDARD POWER SUPPLY CORD WITH A TEST-RESET FUNCTION READ AND SAVE THESE INSTRUCTIONS AIR CONDITIONER MULTI-STEP SPEED ELECTRONIC CONTROLS P/N 819042060-01
ROOM AIR CONDITIONER WARRANTY Your product is protected by this warranty Your appliance is warranted by Electrolux. Electrolux has authorized Frigidaire Consumer Services and their authorized servicers to perform service under this warranty. Electrolux authorizes no one else to change or add to any of these obligations under this warranty. Any obligations for service and parts under this warranty must be performed by Frigidaire Consumer Services or an authorized Frigidaire servicer.
Product Registration Record Your Model and Serial Numbers Record in the space provided below the model and serial numbers. On all models, the serial plate is located on the outside of the interior bulkhead left side. Model Number Serial Number Register Your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the Frigidaire Company.
Read all instructions before using this air conditioner. Important Safety Instructions ! NOTE The power supply cord with this air conditioner contains a current detection device designed to reduce the risk of fire. Please refer to the section ‘Operation of Current Device’ for details. In the event that the power supply cord is damaged, it cannot be repaired it must be replaced with a cord from the Product Manufacturer. ! WARNING Avoid fire hazard or electric shock.
! WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Operation of Current Device The power supply cord contains a current device that senses damage to the power cord. To test your power supply cord do the following: 1. Plug in the Air Conditioner. 2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will notice a click as the RESET button pops out. 3.
Air Conditioner Features NOTE: The following instructions represent the Control Panel, the same instructions can be used for the Remote Control.
Clean Air Fan Faster AUTO Auto Cool Fan Slower Temp /Timer Sleep Check Filter Temp /Timer Heat Fan Energy Saver Cool n.
Check Filter Temp /Timer Heat Auto Cool Clean Air Sleep Check Filter Temp /Timer Heat Fan Fan Slower AUTO Sleep Fan Faster Clean Air Temp /Timer Fan Faster AUTO Auto Cool Fan Slower Temp /Timer Fan Energy Saver Energy Saver Cool Cool Remote Sensing Timer Mode On/Off Remote Sensing TSTS Mode On/Off
YOU WILL SEE: TO TURN UNIT OFF: Check Filter Auto Cool Temp /Timer Heat Clean Air Fan Energy Saver Check Filter Cool Remote Sensing Timer Mode Sleep Temp /Timer Heat Fan Energy Saver Cool Fan Slower AUTO Sleep Fan Faster Clean Air Temp /Timer Fan Faster AUTO Auto Cool Fan Slower Temp /Timer Remote Sensing Timer On/Off Mode On/Off DO THIS: PRESS ON/ OFF BUTTON ADDITIONAL THINGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your
Care and Cleaning Air Filter Clean your air conditioner occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards: Air Filter Cleaning The air filter should be checked at least once a month to see if cleaning is necessary. Trapped particles in the filter can build up and cause an accumulation of frost on the cooling coils. Open the front panel. Grasp the filter by the center and pull up and out.
Avoid Service Checklist OCCURRENCE Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance SOLUTION Air conditioner will not operate. Wall plug disconnected. Push plug firmly into wall outlet. Current device tripped. Preset RESET button. House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker. Control is OFF.
