Submittal (2020)

ManualsBrandsFriedrich ManualsAir ConditionersFreshAire ® Package Terminal Air Conditioner

FreshAire

Series

PTACs

HEAT PUMPS

PURCHASER P.O. # DATE

PROJECT LOCATION

ENGINEER ARCHITECT

SUBMITTED BY FOR APPROVAL FOR REFERENCE

ITEM PLAN DESIGNATION QUANTITY COOLING Btu VOLTAGE FRIEDRICH MODEL

PTAC FreshAire Series Submittal_ 2020_Rev.1

ACCESSORIES

FE ATURES

Constant room comfort monitoring

“Instant Heat” heat pump mode quickly

heats a room to the desired temperature for

increased comfort

Even heat monitoring checks room

temperature and automatically adds heat

boost if necessary

Room freeze protection- heat initiated if

temperature falls to 40°F in an unoccupied

room, raising temperature to 46°F

Dual motors for quiet operation

Durable, powder coat paint nish

Indoor coil frost sensor protects the

compressor to lengthen the life of the unit.

Separate heat and cool range limits

Central desk control ready allowing hotel

owners to control units from a central

location

Condensate removal systems uses slinger

ring technology

Electronic defrost control ensures more run

time in the efcient heat pump mode

Washable, antimicrobial air lter

Service error code memory storage

Emergency heat override

PXSB23020 Electrical Subbase - 230V 15A and 20A Qty

PXSB23030 Electrical Subbase - 230V 30A Qty

PXSB26520 Electrical Subbase - 265V 20A Qty

PXSB26530 Electrical Subbase - 265V 30A Qty

RT7 Wired Digital Thermostat Qty

RT7P Wired Programmable Digital Thermostat Qty

EMRT2 Wired Thermostat with Occupancy Sensor Qty

EMWRT2 Wireless Thermostat with Occupancy Sensor Qty

VRPXEMRT2

Preferred Wireless Thermostat with Occupancy Sensor

Qty

WRT2 Wireless Digital Thermostat Qty

EMOCT Online Connection Kit Qty

EMRAF Remote Access Fee Qty

EMRHCF Energy Management Remote Humidity Control Fee Qty

PXPCFA23015 LCDI 230V 15A Cord - 2.5 kW Qty

PXPCFA23020 LCDI 230V 205A Cord - 3.5 kW Qty

PXPCFA23030** LCDI 230V 30A Cord - 5.0 kW Qty

PXPCFA26515 Non-LCDI 265V 15A Cord - 2.5 kW Qty

PXPCFA26520 Non-LCDI 265V 20A Cord - 3.5 kW Qty

PXPCFA26530** Non-LCDI 265V 30A Cord - 5.0 kW Qty

PDXWSA Wall Sleeve Qty

PDXWSEXT18

Deep Wall Sleeve- For walls up to 17

/2" deep

Qty

PDXWSEXT24

Deep Wall Sleeve- For walls up to 23

/2" deep

Qty

PDXWSEXT

Custom Deep Wall Sleeve, For walls from 13

/4"

to 25

/2" deep

Qty

PXGA Standard Outdoor Louver Qty

PXAA Architectural Louver, clear Qty

PXBG Architectural Louver, beige Qty

PXSC Architectural Louver, color matched Qty

PDXRTB Remote Thermostat Escutcheon Kit Qty

PXDR10 Condensate Drain Kit (pkg/10) Qty

PXSBA Sub Base Qty

PXSE T-Series Sleeve Adapter Qty

PXCJA Conduit Kit w/ Junction Box Qty

PDXDAA Lateral Duct Adapter Qty

PDXDEA Lateral Duct Extension Qty

PXFTA Replacement Filters (Set of 10) Qty

*NOTE: The FreshAire PTAC must be paired with wall controller VRPXEMRT2 to operate as a fully variable speed unit. When used with other

compatible thermostats, the unit will operate at multiple speeds in either cooling or heating mode.

** Cannot be used with PVH09K3FA

Summary of content (3 pages)

PAGE 1
FreshAire® Series PTACs HEAT PUMPS PURCHASER P.O.
PAGE 2
FreshAire system helps achieve ASHRAE 62.1-2013 requirements, and brings up to 52 CFM of conditioned, MERV 8 filtered, outside air into the space. Patented technology uses the inverter compressor and main cooling system to optimize temperature and humidity level of incoming air. By introducing make-up air directly into the guestroom, rooftop central fresh air systems can be considerably downsized to service only the common areas of the property.
PAGE 3
CHASSIS SPECIFICATIONS PVH SERIES COOLING WITH HEAT PUMPS Model PVH09K PVH12K PVH09R PVH12R PERFORMANCE DATA: Cooling Capacity Btu 9600/9400 12000/11800 9600 12000 Cooling Capacity Min./Max Btu 6462-12099 7929-17142 6462-12099 7929-17142 790/775 1040/1025 800 1040 Energy Efficiency Ratio EER 12.1/12.1 11.5/11.5 12.0 11.5 Reverse Heating Capacity Btu 8200/8500 11600/11800 8500 11800 Reverse Heating Capacity Min./Max.