BOLD manual Product codes: 1RB5100IG v1 001 | 1RB5100MM v1 001 | 1RB5100DP v1 001 1RB5100RR v1 001 | 1RB5100PB v1 001 | 1RB5100SG v1 001 Designed by and manufactured on behalf of: Sitecom Europe BV NL - 3011 TA, 6
EN ROCKBOX BOLD XS 1. Micro USB 5. Short press = Volume Down Long press = Previous Song 2. Battery/Charging LED 6. Power button 3. Audio in 7. Short press = Volume Up Long press = Next Song 4. Micro USB 1 BUTTONS 1.
EN READY TO ROCK? HERE IS HOW! 1. Charge the speaker with the Micro USB cable. The power LED will turn red when the speaker is charging and will turn green when the speaker is fully charged. 2. Turn the speaker on. At the side of the speaker, you will find the on/off button. Turn on the speaker. 3. Bluetooth pairing mode. The Bold XS will automatically go into Bluetooth pairing mode when there is no established Bluetooth connection. 4.
LISTEN UP! EN Trouble connecting? When turning the speaker on, it will try to reconnect to it’s previous device. If it can’t find it, it will go into pairing mode Connect a different device? Disconnect other devices from the Bold XS, this will cause it to go into pairing mode automatically. Hearing a beep? The battery is getting low. We’ll give you a warning when you have 20, 15 and 10 percent capacity left. The speaker turned off? The battery was below 5 percent. Charge the speaker to rock out again..