WavePro™ WPV10-100™ Camera User Manual Part Number: LUM0078AA Revision: Apr-2016
Safety Information The products described in this manual can fail in a variety of modes due to misuse, age, or malfunction. Systems with these products must be designed to prevent personal injury and property damage during product operation and in the event of product failure. Warranty FreeWave Technologies, Inc. warrants the FreeWave® WPV10-100™ Camera (Product) against defects in materials and manufacturing for a period of one year from the date of shipment, depending on model number.
WavePro™ WPV10-100™: User Manual Export Notification FreeWave Technologies, Inc. products may be subject to control by the Export Administration Regulations (EAR) and/or the International Traffic in Arms Regulations (ITAR). Export, re-export, or transfer of these products without required authorization from the U.S. Department of Commerce, Bureau of Industry and Security, or the U.S. Department of State, Directorate of Defense Trade Controls, as applicable, is prohibited.
brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.. IC Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Professional Installation Instruction 1.
WavePro™ WPV10-100™: User Manual Le présent émetteur radio (IC: 2329B-PRW0010WP / Model: WPV10) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Approved Antenna(s) List Gain (dBi) Type 2400 MHz 2450 MHz 2500 MHz Connector Dipole 1.53 1.51 1.
Language Description Eesti [Estonian] Käesolevaga kinnitab FreeWave Technologies, Inc. seadme WPV10-100™ vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, FreeWave Technologies, Inc., declares that this WPV10-100™ is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente FreeWave Technologies, Inc.
WavePro™ WPV10-100™: User Manual GNU License Notification Some of the software in the firmware is licensed under the GNU General Public License and other Open Source and Free Software licenses. You can obtain corresponding source by contacting FreeWave and requesting the source on CD. Restricted Rights Any product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.
Page 8 of 32 LUM0078AA Rev Apr-2016 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc.
WavePro™ WPV10-100™: User Manual Table Of Contents Preface 10 1. WPV10-100™ Camera Overview 12 1.1 System Requirements 13 1.2 WPV10-100™ Camera Included Accessories 13 1.3 User-supplied Equipment 14 1.4 WPV10-100™ Camera Hardware Layout 14 2. WPV10-100™ Camera Installation and Setup 15 2.1 Connect to the WPV10-100™ Camera 16 2.2 Setup the Computer IP Address Configuration 18 2.
WavePro™ WPV10-100™: User Manual Preface Where to Find Additional Information WPV10-100™ Quick Start Guide Use the WP201™ website, WavePro™ Downloads, to download the latest version of the Quick Start Guide. Contacting FreeWave Technical Support For up-to-date troubleshooting information, check the Support page at www.freewave.com. FreeWave provides technical support Monday through Friday, 8:00 AM to 5:00 PM Mountain Time (GMT -7). l l l Call toll-free at 1.866.923.6168. In Colorado, call 303.381.9200.
Preface Document Styles This document uses these styles: l l l l l l FreeWave applications appear as: FreeWave. Parameter setting text appears as: [Page=radioSettings] File names appear as: configuration.cfg. File paths appear as: C:\Program Files (x86)\FreeWave Technologies. User-entered text appears as: xxxxxxxxx. 3rd-party names appear as: Notepad®. Caution: Indicates a situation that MAY cause damage to personnel, the radio, data, or network. Example: Provides example information of the related text.
WavePro™ WPV10-100™: User Manual 1. WPV10-100™ Camera Overview Thank you for purchasing the WavePro™ WPV10-100™ Camera. The FreeWave WPV10-100™ is a 2-Megapixel Day & Night wireless Bullet Network Camera which adds monitoring and surveillance capabilities to a variety of network environments. With a built-in removable mechanical IR-cut filter, it helps users keep an eye on what matters and get notified by what just happened on demand allowing remote 24/7 monitoring.
1. WPV10-100™ Camera Overview 1.1 System Requirements These are the system requirements needed to configure the WPV10-100™: Computer with: l an Ethernet interface or wireless network capability l Windows® 7 or greater. Broadband Internet Service (Cable or DSL Modem) Web browser (i.e., Internet Explorer®, Firefox®, Safari®, Chrome®, Opera®). l l l 1.
WavePro™ WPV10-100™: User Manual 1.3 User-supplied Equipment l l l l l Computer with: l Windows® 7 or greater l an Ethernet port l Internet browser (Chrome®, Firefox®, Internet Explorer®, Opera®, Safari®) CAT5e / CAT6 Ethernet cable Medium Phillips-head screwdriver Hammer (for wall installation) Drill with 8mm diameter drill bit (for wall installation) 1.
WavePro™ WPV10-100™: User Manual 2. WPV10-100™ Camera Installation and Setup This section provides procedure information about installation and initial setup of the WPV10100™. l l l Connect to the WPV10-100™ Camera (on page 16) Setup the Computer IP Address Configuration (on page 18) Access the WPV10-100™ Camera (on page 22) LUM0078AA Rev Apr-2016 Page 15 of 32 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave.
2. WPV10-100™ Camera Installation and Setup 2.1 Connect to the WPV10-100™ Camera 1. Screw the antenna onto the WPV10-100™. Figure 3: Antenna on the WPV10-100™ 2. Connect the camera to the computer using the Ethernet cable. 3. Connect the supplied power cable from the camera to a power outlet. Page 16 of 32 LUM0078AA Rev Apr-2016 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave.
WavePro™ WPV10-100™: User Manual Figure 4: WPV10-100™ Connect to Power Outlet and Computer LUM0078AA Rev Apr-2016 Page 17 of 32 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc.
2. WPV10-100™ Camera Installation and Setup 2.2 Setup the Computer IP Address Configuration Note: The images in this example procedure are for (missing or bad snippet). 1. On the computer, click the Windows® Start button and select Control Panel. 2. View the Control Panel window by Category and click Network and Internet > View Network Status and Tasks. 3. Click the Change Adapter Settings link. Figure 5: Change Adapter Settings Link 4. Double-click the Local Area Connection link.
WavePro™ WPV10-100™: User Manual Figure 7: Local Area Connection Status dialog box 5. Click Properties. The Local Area Connection Properties dialog box opens. 6. Select the Internet Protocol Version 4 (TCP/IPv4) option. LUM0078AA Rev Apr-2016 Page 19 of 32 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from FreeWave Technologies, Inc.
2. WPV10-100™ Camera Installation and Setup Figure 8: Local Area Connection Properties dialog box 7. Click Properties. The Internet Protocol Version 4 (TCP/IPv4) Properties dialog box opens. 8. Make a note of the current settings (to reverse this procedure later). 9. Select the Use the following IP address option button. 10. In the IP Address text box, enter an IP Address that is in the same subnet range but a DIFFERENT IP Address than the WPV10-100™ AND different than the computer IP Address.
WavePro™ WPV10-100™: User Manual Figure 9: Local Area Connection Properties dialog box Note: An IP Address is NOT required in the Default Gateway text box. 11. Click OK to save the changes and close the dialog box. 12. Click Close twice to close the Local Area Connection Properties and Local Area Connection Status dialog boxes. LUM0078AA Rev Apr-2016 Page 21 of 32 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave.
2. WPV10-100™ Camera Installation and Setup 2.3 Access the WPV10-100™ Camera 1. On the computer connected to the WPV10-100™, open a web browser. 2. In the address bar of the browser, enter the default WPV10-100™ IP Address: 192.168.1.200. Figure 10: Entered IP Address 3. Press . The Login window opens. Figure 11: WPV10-100™ Login window 4. Enter the default Username and Password (admin for both) and click Login. Note: When accessing the WPV10-100™ the first time, the WebCMS download window opens.
WavePro™ WPV10-100™: User Manual Figure 12: WebCMS Download window 5. Click the Download WebCMS button. The Opening webCMS_n.n.n.n.exe dialog box opens. Figure 13: Opening webCMS_n.n.n.n.exe dialog box 6. Click Save File. The Enter name of file to save to dialog box opens. LUM0078AA Rev Apr-2016 Page 23 of 32 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave.
2. WPV10-100™ Camera Installation and Setup Figure 14: Enter name of file to save to dialog box 7. Click Save. The Enter name of file to save to dialog box closes. 8. Open the location where the webCMS_n.n.n.n.exe file was saved. Figure 15: Designated folder in Windows® Explorer 9. Select and double-click the webCMS_n.n.n.n.exe. The User Account Control message opens. Page 24 of 32 LUM0078AA Rev Apr-2016 This document is the property of FreeWave Technologies, Inc.
WavePro™ WPV10-100™: User Manual Figure 16: User Account Control message 10. Click Yes. Note: If the browser is still open, a WebCMSLive message appears. Figure 17: WebCMSLive message 11. Close any open browsers and repeat Steps 9 and 10. The WebCMSLive Setup: Installing window opens showing the installation process has started. When installation is completed, the WebCMSLive Setup message appears. Note: The installation and setup happens very quickly. The software is installed here: C:\Program Files (x86)
2. WPV10-100™ Camera Installation and Setup Figure 18: WebCMSLive Setup message 12. Click OK to close the messages. 13. Open a web browser. 14. In the address bar of the browser, enter the default WPV10-100™ IP Address: 192.168.1.200. Figure 19: Entered IP Address 15. Press . The Login window opens. Figure 20: WPV10-100™ Login window 16. Enter the default Username and Password (admin for both) and click Login. 17. Press .
WavePro™ WPV10-100™: User Manual The WPV10-100™Camera Home Page opens showing a live-action stream to the computer. Figure 21: WPV10-100™ Camera Home Page Note: See the Window Components for detailed information about the options in the window. Note: : If a gray color is visible in the viewer, it is because the camera has detected insufficient of light in the room and enabled night vision mode automatically. Point the camera to a brighter area, to see it switched to normal color mode.
WavePro™ WPV10-100™: User Manual Appendix A: WPV10-100™ Camera Technical Specifications Specifications may change at any time without notice. For the most up-to-date specifications information, see the product's data sheet available at www.freewave.com. WPV10-100™ Camera Technical Specifications Specification Description Camera Image Sensor 1/2.7”, 1920x1080 pixel, Progressive Scan CMOS LENs Fixed Focal, f=2.8mm / F1.8 F.O.V.
Appendix A: WPV10-100™ Camera Technical Specifications WPV10-100™ Camera Technical Specifications Specification Web Browser View Clients Description l Flip and Mirror l AGC / AWB / AES l Day / Night, Manual or Auto Mode l Text Caption Overlay l Chrome® l Firefox® l Internet Explorer® l Opera® l Safari® l Sharpness l Exposure l Time Stamp Live viewing for a maximum of 2 clients.
WavePro™ WPV10-100™: User Manual WPV10-100™ Camera Technical Specifications Specification Power Requirements Power Consumption Description l Power Supply: 12VDC, 1.0A (power from adapter) l PoE: 54VDC, 0.6A, 802.3af 8W Environmental Operating Temperature -20°C to 50°C -4°F to 122°F Humidity Up to 100%, Condensing Dimensions Length (including bracket): 9.25 inches (23.5cm) Diameter of Bracket: 3.0 inches (7.62cm) Diameter of Camera: 1.75 inches (4.45cm) Weight 7 lbs 3.
WavePro™ WPV10-100™: User Manual Appendix B: WPV10-100™ Camera LEDs These are the WPV10-100™ LEDs: WPV10-100™ Camera LEDs Function Button LED WPS 1~5 sec Green – Blink (RJ45) Reset 6~10 sec Orange – Solid (RJ45) Reset to Default 10 sec or above Orange – Blink (RJ45) LUM0078AA Rev Apr-2016 Page 31 of 32 This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave.