FreeLinc™ FreeMotion™ 200 Headset User Guide ™
Warranty and FCC Compliance Warranty I. What this warranty covers and for how long: a. Radeum, Inc., doing business as FreeLinc (“FreeLinc”), warrants to Purchaser that its FreeLinc manufactured products (“Product”) will substantially conform to FreeLinc’s published specifications, as of the date of the Purchaser’s purchase of the Product, and for one (1) year from the date of purchase (the “Warranty Period”). b.
IV. a. b. c. d. FCC Compliance This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause interference harmful to radio communications.
Safety Information Caution: To reduce the risk of fire or injury to persons, read and follow these instructions. Do not dispose of headset in a fire. The cells may explode. Check with local codes for possible battery disposal instructions. Use only the supplied charging unit to charge the headset from an AC voltage or wall outlet. If the headset becomes hot during charging, disconnect the AC adapter from the wall and contact qualified support personnel.
Protect your headset from spills, excessive rain, and wet locations. Do not use liquid cleaners or aerosol cleaners as they may damage the headset or finish of the headset. Use a dry cloth to clean the external portions of the headset. Do not stick anything inside the product as this may damage internal components. SAFETY INFORMATION Never submerge your headset in water or other liquids. This product conforms to the following safety standards: ANSI/UL 60950-1 1st Ed. CAN/CSA C22.2 No.
Table of Contents SAFETY AND WARRANTY INFORMATION Warranty FCC Compliance Safety Information TABLE OF CONTENTS INTRODUCTION AND GENERAL INFORMATION CONTENTS IN PACKAGES PARTS OF THE PRODUCT Diagram/Terms Headset Headset Charge Indicator Light Headset Indicator Tones Headset Volume Adjustment Tones GENERAL OPERATION Operating Concepts and Terms Personal Communication Bubble Pairing Seek Mode Linking Sleep Mode Charging the Battery Changing Ear Gels Using Your Headset for the First Time Step One: Attach Ada
16 16 16 17 17 17 18 18 18 18 18 19 19 ACCESSORIES 20 Car Charger (DC, Cigarette Lighter) Belt Case Additional Eargels 20 20 20 TIPS AND SUGGESTIONS Specifications: TROUBLESHOOTING TABLE OF&CONTENTS SAFETY WARRANTY Step Two: Turn On Adapter Step Three: Exit Sleep Mode Step Four: Pair Headset to Adapter Step Five: Establish Link (Automatic) Step Six: Adjust Headset Volume Step Seven: Ending Use VOX Operation Entering VOX Mode Operating in VOX Mode Adjusting VOX Sensitivity Exiting VOX Mode Pairing You
Introduction and General Information Congratulations, and thank you for choosing conventional RF systems. By limiting the range the FreeLinc FreeMotion 200 wireless headset to and bandwidth to only what the application enhance your two-way radio communications. requires, the product achieves a very substantial savings in power.
FreeMotion 200 (FM-200): • • • • • One Headset One AC Power Adapter One User Guide One Quick Start Guide Six Ear Gels INTRODUCTION PACKAGE CONTENTS 9
Parts of the Product - Diagrams FreeMotion 200 (FM-200) Headset Flexible Neck Earpiece swivels for use with either left or right ear Push-to-Talk Button Noise-Canceling Microphone
SAFETY &DIAGRAMS WARRANTY Ear Gel (removable) Volume/ VOX Sensitivity Adjustment Buttons USB Power Adapter Connection Charge Indicator LED Light 11
Parts of the Product - Headset Headset Charge Indicator Light The charge indicator light on your FreeMotion 200 headset indicates battery charge status when plugged into the charger: LED BEHAVIOR INDICATION Red, Solid Charging Green, Solid Charging Complete The headset LED will not illuminate when it is unplugged from the charger.
When clicking the Volume Up or Volume Down buttons to adjust headset volume, you will hear the following tones: INDICATION TONE Volume Up/Volume Down Buttons Clicked Single short tone Maximum Volume Reached Single short tone, high pitched Minimum Volume Reached Single short tone, low pitched LIGHTS & TONES SAFETY & WARRANTY Headset Volume Adjustment Tones 13
General Operation Operating Concepts and Terms Personal Communication Bubble The FreeMotion 200 works within a small field, or “bubble” of communication surrounding the user. The size of the bubble is determined by the distance between the headset and the adapter. If the headset and adapter are close together, the bubble shrinks to approximately three feet (0.91 meters) in diameter – just large enough to accommodate the range of communication between adapter and headset.
When your headset has remained in Seek Mode for five minutes without finding a link, it will go into Sleep Mode. While in Sleep Mode, the headset uses no power. To awaken your headset from Sleep Mode, depress the PTT button, which activates Seek Mode. Charging the Battery take just three hours (approximate). The charge indicator light will turn green when the headset battery is fully charged.
General Operation Using Your Headset for the First Time tions to the headset. Step Three: Exit Sleep Mode Step One: Attach Adapter Fit adapter to the accessory interface of the portable radio (see your portable radio’s user manual if you need assistance locating the accessory interface). If your adapter has a mounting clip on top, this will fit into a corresponding notch on top of your portable radio. If your adapter does not have a mounting clip, use the set screw (see diagram) to secure it to your radio.
Once you have paired your headset to an adapter, the two devices can establish a communication link. This occurs automatically immediately after pairing, and the link persists as long as the headset remains within the Personal Communication Bubble (see definition above). When your headset moves outside of the bubble, the link is lost, and the unit returns to Seek Mode. While in Seek Mode, the headset is attempting to locate the adapter to which it is paired (see above definition).
General Operation VOX Operation Entering VOX Mode To enter VOX mode, depress the Volume Down button on headset for six seconds. The adapter LED will change from flashing green to flashing orange. Operating in VOX Mode To initiate a transmission in VOX mode, you simply speak into the microphone on the headset. The sound of your voice activates the transmission in the same way depressing the PTT button does in normal mode.
Manually Initiating the Pairing Process To initiate pairing, hold the headset close to the adapter and simultaneously depress the Volume Down and Volume Up buttons on the headset. Hold the Volume Up and Volume Down buttons on headset simultaneously for 10 seconds. The adapter LED will flash solid green indicating a successful pairing. You can repeat this process at any time to break the existing pairing and establish a new pairing with any other adapter.
Accessories FreeLinc continually releases new accessories for FreeMotion products. Please refer to the FreeLinc website at www.freelinc.com to see the latest offerings. Tips and Suggestions To learn more about Magnetic Induction Technology, please visit Aura Communications web site at http://www.auracomm.com.
HELP Notes: 21
Adapter The indicator light on your FreeMotion 200 adapter indicates wireless communication status as follows: LED BEHAVIOR Red, Flashing 2x per second Green, Solid INDICATION Seek mode Mate found, pairing/linking in progress Green, Flashing 2x per second Link active Orange, Flashing 2x per second VOX mode active LED not Illuminated Sleep mode Indicator Tones During operation, you will hear the following tones from your FreeMotion 200 headset: INDICATION TONE Low Battery Double short chirp, repea
Quick Operation Instructions 1. Attach adapter to radio 2. Turn on radio and adapter 3. Activate headset (exit sleep mode) – Depress PTT button once 4. Pair headset to adapter – Simultaneously depress Volume Up + Volume Down for 6 seconds. Once pairing is established, you can skip this step the next time you use your headset. 5. Establish link (automatic) – LED will turn solid green and then flash 2x per second. 6. End use – Turn radio and/or adapter off.
™ © 2005 Radeum Inc., DBA FreeLinc. All Rights Reserved. U.S. Patents Pending. The FreeLinc FreeMotion 200 may not be authorized for use in some countries. Developed using: ® US Patents 5771438A, 5982764A, 5972925A, 6459882B1. Additional patents pending. LibertyLink and Aura are registered trademarks of Aura Communications Technology, Inc.