RUBY® 10 Handheld Video Magnifier OCR and Touch Setup and Use Learn more about the RUBY 10 in Advanced Features and Functions, available for download at www.freedomscientific.com/RUBY10 [QR code]. © 2021 Freedom Scientific, Inc. All Rights Reserved. RUBY® is a registered trademark of Freedom Scientific, Inc. in the United States and other countries. Information in this document is subject to change without notice. Instructions for Use, Part I, Setup and Use ######-### Rev.
Charge and Power On Device 1. Attach a USB-C cable to the left side of the device and to the power adapter. 2. Plug the power adapter into a wall outlet. A full charge takes about 4 hours. 3. Press the orange button above the USB-C port for 3 seconds to power on the RUBY 10. The Freedom Scientific and RUBY 10 splash screens are displayed before going to live view. 4. Briefly press the Power button for sleep mode and to display the battery status. Press the Power button for 7 sec to power off the device.
Power button USB-C port RUBY 10 Setup and Use 3
Power button Charging LED RUBY 10 Setup and Use USB-C port Audio jack 4
Use the Stand Extend stand 1. Place RUBY 10 in front of you so the screen faces you and the Freedom Scientific logo is below the screen. 2. Hold unit upright with the bottom edge stabilized against a desk.
3. Curl your fingers around the unit near the top and push them beneath the edges of the stand. .
4. Push out until stand is fully extended and it clicks into place. 5. Gently set the unit down on the stand.
Retract stand 1. Place RUBY 10 in front of you so the screen faces you. Step 5 2. Grasp both sides of the unit. 3. Keep your thumbs on the front of the unit to keep it steady. 4. Curl your fingers around unit. Step 6 5. Press in on the middle of the stand legs from the outside. The legs will buckle between the feet and the unit. 6. Gently press the stand toward you until it is flush with the unit.
Open Camera Arm 1. Push up on orange tab at top of unit until camera begins to slide out. Show thumb under orange tab and hand wrapped around device. 2. Pull up to extend the camera arm.
RUBY 10 Setup and Use 10
Physical Buttons Extend stand to easily read a flat book, magazine, or newspaper in live view. Use the buttons on each side of the device to perform basic functions.
Left side, top to bottom 1 Color mode button combinations 2 Menu button 3 Live view button makes the camera active so that whatever the camera is pointed at is displayed on the screen RUBY 10 Setup and Use rotates through configured color opens or closes the button bars 12
Right side, top to bottom 4 Capture button takes a picture of whatever is displayed on the screen or returns to live view. Double press captures, recognizes text and starts reading. 5 Zoom in button increases size of image or font size of text, so less of the image or text is shown. 6 Zoom out button decreases size of image or font size of text, so more of the image or text is shown.
Button names Color mode Menu Capture Live mode Zoom in Zoom out RUBY 10 Setup and Use 14
On-Screen Button Bars Button Descriptions Left side, top to bottom: Right side, top to bottom: 1 Display main menu 1 Turn lights on or off 2 Set brightness level 2 Apply reading line or mask 3 Change speaking speed faster or slower 3 Set color theme of system menus 4 Change system volume up or down RUBY 10 Setup and Use 15
Button Names Main menu Lights Brightness Line/masks Speed Menu colors Volume RUBY 10 Setup and Use 16
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
RF Exposure Information and Statement The SAR limit of USA (FCC/ISED) is 1.6 W/kg averaged over one gram of tissue. Device types: Ruby 10 (FCC ID: VC2-RUBY10/IC: 8923A-RUBY10) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for properly worn on the body is FCC: 0.166 W/kg/ ISED:0.389W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body.