Lit Bike USER MANUAL
FREEBEAT PHILOSOPHY EXCITEMENT SOPHISTICATION AUTHENTICITY Freebeat creates an innovative alternative to replace the traditional borǣȇǕ ˡtness routine. We have developed a fun interactive game to bring the experience of studio cycling and strength training to the comfort of your own home. The beat-matching gamiˡƬation system simulates dancing on a smart bike instead of simply exercising on a stationary bike.
SAFETY INSTRUCTIONS IMPORTANT INFORMATION SPECIFICATIONS PACKING LIST ASSEMBLY GETTING STARTED APP UI DESCRIPTION MAINTENANCE & CARE WARRANTY & AFTER SERVICE CONTENTS
For regular use, carefully inspect all components every 1-2 months. Pay close attention to the tightness of bolts and nuts. This is especially true for all connected parts. To ensure that the safety level is maintained at the highest Damaged components can jeopardize your safety or reduce the lifetime of the equipment. Therefore, incorrect or damaged parts should be replaced immediately and the equipment taken out of use until then. Use only original spare parts.
Do not use corrosive or abrasive materials to clean the equipment. Make sure that these materials do not pollute the environment. Always check all screws and connectors and the respective safety precautions before use. A slight noise of production on the belt or motor is due to the construction and has no negative effects upon operation. Áǝƺ ˢɵɯǝƺƺl is designed to be bi-directional so that it cannot be turned in a second. It has to press the brake button and then turn away.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
C. REAR STABILIZER ASSEMBLY B. FRONT STABILIZER ASSEMBLY A. MAIN FRAME ASSEMBLY F. MONITOR E. HANDLEBAR ASSEMBLY D. HANDLEBAR RISER ASSEMBLY L. TOOL KIT K. POWER ADAPTER J. SADDLE I. PEDAL L/R H. WEIGHT SELECTOR PIN G. CUP HOLDER ×4 L4. SCREW M5 × 10mm ×2 L3. SCREW M5 × 12mm ×3 L2. SCREW M6 × 16mm ×4 L1. HEX BOLT ASSEMBLY M10 × 40mm TOOL KIT WARNING L8. L7. L6. L5. 13mm 15mm 17mm Take out all the parts of bike before assembly.
SCAN HERE TO VIEW THE COMPLETE VIDEO OF STEP-BY-STEP GUIDE FOR ASSEMBLY L1 *Place all parts G1 into stabilizers before tightening the main frame and stabilizers together. Place the main frame above the stabilizers, aȇƳ ˡɴ the main frame (part A) into place by tightening parts Hex bolt into the corresponding Spring Washers and Curved Gasket (part L1) on the stabilizer. *Use foam from the packaging to give extra support to hold bike upright, if needed. Acquire part B and part C front and rear stabilizer.
D A Screw part G Water Bottle Holder into part D Handlebar Riser with Phillips Pan Head Screws (part L2). STEP 2 L2 G L7 Carefully attach part D Handlebar Riser with main bike frame and connect Computer Upper Cable with Computer Lower Cable (removed the black string). STEP 3 D E D L3 4mm L8 * If the data chord is unsteady: part H Weight Selector Pin and part D Handlebar Riser in the front end of the main frame needs to be unscrewed and readjusted and tightened again.
15mm L5 I-L I-R *Please test ride the bike slowly after construction and tighten the pedals accordingly to ensure safety. Twist the pedals onto their respective sides of the bike. The left pedal turns counterclockwise, and the right clockwise. Find part I-L & I-R: left and right pedals. Look for either an L or R symbol on the crank and axle to distinguish between left and right respectively. Tighten any loose pedal with a 15 mm wrench.
L4 L7 F K Finally, login to your freebeat account, pick a class and start pedaling! Tighten any loose screws if the bike is still unstable. Ensure the bike does not wobble. Before you start riding, make sure the bike is stable by adjusting the leveling feet underneath the front and back stabilizers. Turn them counterclockwise until they rest ˡȸȅǼɵ Ȓȇ Ɏǝƺ ǕȸȒɖȇƳ and ensure stability on the ground. Use either hand or wench to turn the leveling feet.
SETTING UP YOUR ACCOUNT Enter your email address and password. TAP CREATE STEP 3 SELECT TIME ZONE Choose your current location and correct time zone. TAP NEXT STEP 2 Enter your preferred name. You can change your account name later too. Follow the steps on the screen to adjust the bike to ˡt your body. Ensure you maintain a proper body position when you ride to avoid any injuries or strains. You're nearly there! Join our 'freebeat training day' to learn more about the system and how to ride it.
Everyone's homescreen is different. We personalized your homescreen to what the system thinks suits you the best. The more classes you take, the algorithm will understand you more. You can use ˡǼters and the search bar to ˡȇƳ ɀpeƬǣˡƬ classes and trainers.
To ensure safe operation and optimal performance, check for wear and damage and perform maintenance on a regular basis. Replace any damaged or defective parts immediately. Do not use the bike until the repair is performed for safety reasons. Only use original parts from the manufactureȸِ !ǝƏȇǕƺɀ Ȓȸ ȅȒƳǣˡƬations to this unit not expressly approved by freebeat could void the warranty. AFTER RIDES EVERY 4 TO 6 RIDES SADDLE: Make sure the saddle is parallel to the ground.
www.